Which is better, ceramic or high carbon brake pads

Ceramic brake pads. Ceramic brake pads can be said to make up for organic and semi-metallic.

Deficiencies of brake pads. Its material is mainly made of mineral fibers and aramid fibers.

and ceramic fibers.

and other materials. On the one hand, since there is no metal material, noise is significantly reduced when the brake pads rub against the brake disc. At the same time, the damage to the brake disc during the friction process will also be significantly reduced.

In addition, the coefficient of friction of ceramic brake pads at high temperatures.

It can still maintain stability, avoiding the attenuation of braking force due to the melting of the material due to long-term or high-speed braking of organic or metal brake pads, which greatly improves safety. At the same time, it is also more wear-resistant.

Brake pad precautions.

Under normal driving conditions, the brake shoes should be inspected every 5,000 kilometers, and the more wear and tear is later, the more important the inspection should be. It is necessary to check not only the remaining thickness, but also the state of the wear of the hoof, whether the degree of wear on both sides is the same, whether the return position is free, etc., and if any abnormal situation is found, it must be dealt with immediately.

When replacing the brake pads, the brake cylinder must be pushed back with a special tool. No other crowbars can be used.

Hard pressing, which can easily cause the brake caliper guide screw to bend and make the brake pads stuck.

Ceramic brake pads are more wear-resistant, but I think ceramic brake pads need to be used in conjunction with brake discs, if you simply use ceramic pads, it will be more fragile, and high-carbon brake pads will have more brake powder to the braking effect will be better.

High carbon is good, the brake effect thermal attenuation and protection of the brake disc are better than ceramic, but it is too expensive, generally for high-end cars, after all, compared with the brake disc, the high carbon sheet is still very cheap.

High-carbon titanium and ceramics are the corresponding products that manufacturers refer to according to the formula attributes of the products. As for which product is good, there is no absolute answer to this, it varies from car to car, just like clothes, a lady's clothes have a good texture, but they are not suitable for men to wear, and the same is true for brake pads, although the quality of ceramic pads is very good, but it is not necessarily suitable for every car, the performance advantages of high carbon titanium brake pads are obvious, but there are also unsuitable vehicles, it is best to refer to the material properties of the original car brake pads to selectively buy, do not blindly follow the popular feelings of the market.

Ceramic brake pads are better.

Hello, it must be a little better than ceramics.

The so-called ceramic brake pads refer to the friction material formulation, which is mainly composed of ceramic fibers. The ceramic formula was invented by the Japanese. In addition, there are semi-metal formulas and less-metal formulas in the mainstream, each with its own advantages and disadvantages.

Semi-metal formulations are mainly used in German cars, while semi-metal formulations are mostly used in the United States and other European countries. At present, the ceramic formula is indeed the best performance, high temperature resistance, small grinding disc, low noise, and less ash, but due to process and cost factors, the market is still very high. So there are a lot of fakes on the market.

The so-called ceramic brake pads refer to the friction material formulation, which is mainly composed of ceramic fibers. The ceramic formula was invented by the Japanese.

In addition, there are semi-metal formulas and less-metal formulas in the mainstream, each with its own advantages and disadvantages.

Semi-metal formulations are mainly used in German cars, while semi-metal formulations are mostly used in the United States and other European countries.

At present, the ceramic formula is indeed the best performance, high temperature resistance, small grinding disc, low noise, and less ash, but due to process and cost factors, the market is still very high.

Therefore, the market is also full of fake and shoddy goods, and it is more safe to choose a well-known brand if conditions permit.

Ceramic brake pads are better.

Semi-metallic brake pads have good heat resistance, high absorption power per unit area, large thermal conductivity, and can be applied to the braking conditions of automobiles at high speed and heavy loads.

Ceramics are harder and wear-resistant, and the real ceramic brake pads are containing aramid fibers, without metal, with good thermal stability, low thermal conductivity and good wear resistance, which can meet the high-performance requirements of various high-performance brake materials, and can also meet the technical requirements of brake pads such as high-speed, safety, and high wear resistance, and are more used in high-performance sports cars.

Ceramic brake pads are a type of brake pads, including mineral fibers, aramid fibers and ceramic fibers (because steel fibers can corrode, produce noise and dust, so they cannot meet the requirements of ceramic type formulations), are lighter in color and more expensive than other brake pads, ceramic brake pads are cleaner and quieter, and provide excellent braking performance without wear on the pairing.

Many consumers will be mistaken at first to think that ceramic is made, in fact, ceramic brake pads are from the principle of cermet rather than non-metallic cermet, brake pads due to high-speed and vigorous braking, high temperature on the friction surface, according to measurement, can reach 800 900 degrees, some even higher.

At this high temperature, a similar reaction of cermet sintering will occur on the surface of the brake pad, so that the brake pad has good stability at this temperature. The traditional brake pad will not produce a sintering reaction at this temperature, because the surface temperature rises sharply, the surface material will melt or even produce an air cushion, which will cause a sharp reduction in braking performance or a complete loss of brake after continuous braking.

Hello, each has its pros and cons, the metal is wear-resistant, but it hurts the brake disc greatly, and the ceramic brake pads are softer and the braking performance is better.

Advantages of ceramic brake pads:

1. The biggest difference between ceramic brake pads and traditional brake pads is that there is no metal. Generally, the metal will be worn out when rubbing, but the ceramic will not appear in this case, and the ordinary brake pad is also very noisy when in use, after installing the ceramic brake pad, in normal driving, there will be no abnormal noise. However, the ceramic one will not be noisy, and it is more comfortable to use.

2. The service life is long, the aesthetics will not change, there are no scratches when used, and his formula is unique, and there will be no foam left on the brake device. The service life of ceramic materials is more than 50% higher than that of ordinary semimetals.

3. It has good mechanical strength and physical properties. Able to withstand high pressures and shear forces. And the heat dissipation is fast and does not affect braking.

4. The thermal decay of ordinary brake pads is low, and the temperature of the brake oil generated by high temperature and emergency braking increases the brake braking delay, and even loses the braking effect, and the safety factor is low, and the ceramic is more safe.

Second, the disadvantages of ceramic brake pads.

Due to its high material and high practicability, it is higher than general brake pads.

Precautions for purchasing brake pads:

1. Look at the friction coefficient, the friction coefficient determines the basic braking torque of the brake pad, too high will cause the wheel to lock up, lose control of the direction and burn the pad during the braking process, and if it is too low, the braking distance is too long;

2. Looking at safety, the brake pad will produce instantaneous high temperature during braking, especially in high-speed driving or emergency braking, the friction coefficient of the friction pad will decrease at high temperature;

3. Whether it is comfortable, including braking feeling, noise, dust, smoke, odor, etc., is a direct embodiment of friction performance;

4. Life, usually the brake pad can ensure a service life of 30,000 kilometers.

On the whole, the disadvantage of ceramic brake pads is that they are more expensive! If you're on a budget, you might as well give it a try!

Car maintenance experience sharing How to choose a brake pad metal formula or ceramic formula?

It's a good point for ceramics! It does not hurt the brake disc and is durable.

Hello, the ceramic is better, silent and wear-resistant.

What are the benefits of ceramic brake pads? The car mechanic told the truth, what a trick.

The ceramic sheet has good high temperature resistance, the unit price is not necessary, it is very expensive, graphite material is the best choice for household use, good heat dissipation, and moderate. The "Wear-Resistant" that my little Buick changed is graphite material, and the braking performance is very good.

Then you have to see what brand of brake pads you buy. If it's domestic, that's it, if it's Japan's Akiboro, then you're buying the most successful nao asbestos-free organic formula brake pads in the brake pad industry. The so-called ceramic formula in our country is only conceptual, and we collectively refer to the brake pads with a steel fiber content of less than 5% as ceramic brake pads.

However, the ceramics on the domestic market are not the successful formula of the Japanese Archiporo. The other is the coefficient of friction. For heavy vehicles and 4WD models, it is difficult to stop at high speeds.

The difference between ceramic brake pads and ordinary brake pads is that ceramic brake pads do not contain metal, which is more durable than ordinary brake pads, has better heat dissipation, shorter braking distance and can be continuously braked at high temperature and high intensity.

The general brake pad friction material will be affected by temperature, and in the actual use process, whether it is low temperature or high temperature, it will affect the friction, thereby affecting the braking effect. The friction material of ordinary brake pads is immature, the temperature resistance is low, it is easy to rust, the material is hard, it is easy to break, and it is easy to produce abnormal noise.

The things you need to pay attention to when buying a car are as follows:

1. Confirm the purchasing ability

Determine the purchasing power, after buying a car does not affect the overall quality of life of the family, generally according to the average income of the family in the past three years, generally take out 20% of the family for three years, but not more than 10% of the value of the family's fixed assets.

2. Concerns:

The most important thing for a family car is safety, followed by affordability, because the safety of the car carries the life of a family, so safety is the top priority.

3. On-site confirmation:

According to the above two steps, basically determine the several models to buy, and go to the 4S store to confirm on the spot, including test drive, inquiry, loan, repair and maintenance, and other related information.

Conceptually speaking, carbon-based brake pads are added with carbon fiber, and the broad concept of ceramic brake pads is that the fiber content of steel wool is less than 5%, which are collectively referred to as ceramic plates.

Carbon-based brake pads are comparatively stiffer than ceramic pads and are also superior to ceramic pads in terms of thermal decay and braking coefficient. This is why foreign competitive vehicles will generally choose carbon fiber series of brake pads, of course, carbon-based brake pads and carbon fiber pads used in competitive vehicles are very different.

Carbon-based brake pads are more upscale than interjection brake pads**.

Summary. Hello, dear <>

Carbon ceramic brake pads are an upgraded version of ceramic brake pads, the quality of carbon ceramic brake pads should be more reliable, the braking effect will be better, under normal circumstances, the brake pads are generally about 6 80,000 km and need to be replaced. Carbon ceramic brake pads are an upgraded version of ceramic brake pads, the quality of carbon ceramic brake pads should be more reliable, the braking effect will be better, under normal circumstances, the brake pads are generally about 6 80,000 km and need to be replaced.

What is the difference between carbon-based brake pads and ceramic brake pads?

Hello, dear <>

Carbon ceramic brake pad is an upgraded version of ceramic brake seepage macro car pad, the quality of carbon ceramic brake pad is more reliable, the brake effect will be better, under normal circumstances, the brake pad is generally about 6 80,000km need to be replaced. Carbon ceramic porcelain brake pads are an upgraded version of ceramic brake pads, the quality of carbon ceramic brake pads is more reliable, the braking effect will be better, under normal circumstances, the brake pads are generally about 6 80,000 km need to be replaced.

Hello, dear <>

The difference between ceramic brake pads and carbon-based brake pads is that ceramic brake pads do not contain metal, which is more durable, better heat dissipation, shorter braking distance and can continuously high-intensity braking at high dry front temperature, carbon-based brake pads are suitable for most vehicles, and ceramic brake pads are suitable for mid-to-high-end models.

Choose according to your own economic situation and the requirements for brake performance. If people have high requirements for the performance of brakes, they should choose to use ceramic brake pads. The difference between ceramic brake pads and metal brake pads is high temperature resistance, metal brake pads may have brake failure due to high temperatures, while ceramic brake pads can continue to operate at high temperatures, and achieve more urgent distance braking.

If you choose metal brake pads, try not to brake for a long time, which can easily lead to large wear and tear of the brake pads, and the long-term use of the brake pads may also lead to abnormal noise of the brake pads.

First, the material gap ceramic brake pads are made of ceramic, and ceramics according to the hardness of different, some ceramics may be very fragile, and some ceramics may be slightly stronger, but the overall hardness is not comparable to the metal. But if it is a metal brake pad, he is facing a loss problem, that is, the rust of the brake pad. On rainy days, even when there is water on the ground, the vehicle will inevitably bring water to the brake pads when driving past, which will lead to the rust of the metal brake pads, and after the rust, the brake pads will become very difficult to use, which is his disadvantage.

Second, the gap in different air car repair shops, as well as different masters of the sale, the two kinds of brake pads are a little different, ceramic brake pads are much higher than metal brake pads. Replacing one ceramic brake pad can often replace 2 or 3 metal brake pads, so people can make their own choice according to the situation you use. If the performance requirements for the brakes are relatively high, and the safety requirements for the vehicle are high, it is recommended to use ceramic brake pads.

However, if you prefer to use more economically, you can choose metal brake pads.

The trial range of metal brake pads is relatively wide, which is more in line with most models, and people can arrange it according to their own vehicle model and other conditions.