Do telecom broadband IP addresses and cats need to be set?

10rt needs to be set Details If you can improve the Internet speed! Supplement: After the boot is completed, it takes a period of time for the computer logo in the lower right corner of the computer desktop to appear, and then you can connect to broadband or do something else, otherwise the computer card is ruthless, there is no response at all Satisfactory answer up to 20 levels 2010-12-291, ordinary broadband user IP is randomly assigned by the operator, every time you connect to the network, after passing the broadband account authentication, the operator's authentication server will randomly assign an IP to your computer, Therefore, the telecom broadband IP address does not need to be set.

2. The cat is a modem, which is to complete the conversion of digital signals and analog signals, and it does not need to be set, and the Internet speed mainly depends on your broadband bandwidth. Follow-up: What do you want to set to dial faster?

Is it IP or something? It doesn't seem to be set to affect the boot speed? ：

The general user is dial-up to the Internet, with the operator to give you the username and password you can dial up the Internet, IP is automatically obtained, no need to set, will not affect the boot speed. Follow-up: If I use a route that I used before on this machine, does it have any impact on a machine router, in order to avoid dialing, I know that I have to reset the route, because I have set it up before, and I have to set it again!

A machine route has no effect, and the correct route can be used. Follow-up:

Do I need to set DHCP in the route: I don't need to set it. Other (2) Ruzi Niu Communication Engineer|21991 satisfactory answers2010-12-29No need to set, the IP address of ordinary broadband users is randomly assigned by the operator, and the broadband cat is half of the general.

Level 12 2010-12-29 does not need to be set. The internet speed is still as fast as ever.

The steps to set up the Broadband Cat Router are as follows:

2. Then open the browser and enter the management address and login password of the router.

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

If the IP address is the same, you only need to disconnect the router from the modem, then set the router and reconnect again. In addition, if you have a broadband of 200M and above, you need to use a Gigabit router. The above information is for reference only, gigabit in the city, C-position debut.

5G dual gigabit**, 1000M broadband, 60G traffic for the whole family, details can be found in Guangxi Telecom's online business hall. Customer service number 68 is the answer.

The steps are as follows. 1. Set up telecom optical fiber modems.

1. Open the browser and enter the IP address of the Fiber Modem in the address bar, as shown in the following figure.

2. In the login interface of the Fiber Modem, enter the user name and password, which are generally viewed on the back of the Fiber Modem.

3. In the China Telecom Fiber Modem interface, select the Status tab.

4. Next, select the Configuration Wizard option.

5. In the interface that appears, enter the Internet account number and Internet password, which will be provided by the telecommunications service provider when handling broadband.

6. Then, select the network port, and I selected both network ports.

7. In the Terminal Login Password Modification window, select the check box before the terminal login password is modified.

8. Enter the initial password of the modem and then enter the login password you set.

9. Follow the prompts, and the telecom optical fiber modem will be set up.

2. Set up a wireless network.

10. Then configure the wireless function of the router and enter the IP address of the router in the browser.

11. Enter the router password and log in to the router.

12. Select the Internet setting option, as shown in the figure below.

13. Select Static IP, IP address set, subnet mask set, gateway set, and finally local DNS.

14. Select the wireless settings tab, turn on wifi, and set its name and password.

15. Finally, click the Advanced Settings tab, select the intranet setting option, and change the LAN port IP address to.

16. After saving the settings, connect the router to the Fiber Modem, and the wireless network of the Telecom Fiber Modem will be set up.

Here's how:> second column "Subnet Mask" does not need to be filled in manually, just click on it and it will automatically fill it in for you.

Assuming that the IP address is :, then the default gateway is set to :.

Telecom connection broadband still needs a cat, the full name of this cat is modem, its main role is to convert optical signals into electrical signals that can be recognized by computers. Calling the modem a cat is affectionately called "cat" based on the homonym of its modem;

It generally consists of a modulator and a demodulator. At the sending end, the digital signal generated by the serial port of the computer is modulated into an analog signal that can be transmitted through the ** line; At the receiving end, the modem converts the analog signal fed into the computer into the corresponding digital signal and sends it to the computer interface. In personal computers, modems are often used to exchange data and programs with other computers, as well as to access online information service programs.

1. Click "Network" on the desktop.

2. Go to the "Network and Sharing Center" and click "Local Connection".

3. Click "Properties" in the pop-up dialog box.

4. In the pop-up properties dialog box, select "Internet Protocol" and click it"attributes"。

5. Enter the dialog box and fill in the information such as the IP address, default gateway, and DNS address to be configured.

6. Set it up and click "OK".

Telecom broadband non-network cable into the home of the telecom broadband must use the cat for conversion, the telecom wide crack surplus into the home generally use ** copper wire or optical fiber line, both lines are required cat as a signal conversion equipment. Yu Yuan is blind.

**Copper wire needs an ordinary broadband cat, the ** line is converted into a network cable available for the computer, the optical fiber line needs to use an optical modem, and the optical fiber line is converted into a network cable for use, and the two ways to enter the home must use the cat.

There is also a direct network cable into the home, this is the way of centralized conversion of telecommunications, after the line is turned into the user's home, for the user to use the vertical space, this wiring method does not need to use the cat, directly insert the home network cable into the computer to dial can be used.