Why does it take half a day for my computer to reflect when I tap on the broadband connection?

You first check whether the crystal plug of the network cable is loose, click on the computer, then open the device manager, find the network adapter point to deactivate, and then start it, maybe it's fine. If not, don't be angry! Sit down, drink a cup of tea, cheer up in the hot summer, the temperature is very high, the temperature of my chip is above 40 degrees, the temperature of the hard disk is higher than 45 degrees, and the temperature of the network card is more than 80 degrees; Can you work in such an environment?

You still have a fan or an air conditioner or something, do you mind my business? The same goes for our devices (devices are: cats, routers, network switches, hubbles, computers, etc.) that feel hot and can't work for you anymore; You can't go to the Internet, you look for masters in the north and south, don't cool me down, you can't find anyone (or replace cats, routers, etc.), because our brothers have the same temper, if you don't cool us down, we will strike!

You may wish to take a look at the following methods, and use measures that you feel are acceptable to reduce the temperature of my (equipment) working environment, and I promise: continue to serve you.

A: Users who often surf the Internet for up to half a year should open the shell of the device after the power is off and clean up the dust inside the device. b: Place the equipment in a safe place for people, open the lid of the equipment, use air convection to strengthen contact with the air, and naturally dissipate heat;

c: Install a micro fan to the equipment to increase the convection of air and force heat dissipation;

D: If you are doing IT, I suggest that you install a heat sink on the heating part of the device after disconnecting the power supply.

e: After the equipment is disconnected from the power supply, use a 3mm drill bit to drill many holes up and down the equipment to strengthen the air convection flow and improve the heat dissipation conditions;

f: To ventilate and dry the equipment, it is best to make an insulated heat dissipation bracket (there are also notebooks on the market) to support the equipment for natural heat dissipation;

H: Let the adsl cat sync first: power off the cat and restart it.

i: The software settings are reasonable, so that 3 do not install: do not install informal software, do not install P2P (occupy resources) software, and do not install infrequently used software.

Turn off all unnecessary network connections, such as Thunderbolt BT Donkey, etc.;

j: Optimize the network Personally, I recommend using some gadgets, such as Super Bunny, Optimizer or 360, etc.K: The computer should have at least one effective and genuine antivirus software installed, and the firewall settings should be appropriate (not too much, too high).

l: NIC problem: The NIC has appropriate bandwidth and stable operation.

As long as you take care of our brothers (routers, cats, Hubble, network switches and their computers), our brothers promise to truly do: "You respect me, I respect you" for your faithful service. Otherwise, ride a donkey and read the record book--- let's see!

Thank you for my answer!

Thank you: friend!

After entering the system, you must first recognize the network card, that is, the small picture of the local connection comes out, and then you can click on the broadband connection.

It won't be slow to add the IP automatically and it will have to find the IP by itself when it is turned on, so it will delay the time.

This will happen when you use a broadband connection, because your network card has to keep getting the IP address, and the network connection will not appear until you can't get it, and then you can dial up the Internet @ when you click on the broadband connection

Because the host self-test, it will check the cat you are connected to the broadband, and only after checking, the local connection can be connected after it appears.

It may be **busy. It'll be fine after a while. In not giving the communication company **.

How many errors? Sometimes it's **busy, and if ** is 678, it's no Ferrer, and you have to pay money

You have to wait for the locally connected small computer icon in the lower right corner to come out.

The computer sucks! Take a bottle of mineral water and extinguish it. Buy a new one.

The background launch is not complete yet. Wait 30 seconds and it's OK, and it's time to restore it before it jumps out. There is also a possibility that the connection shortcut icon is invalid! It is also possible to create a new broadband connection in the Internet Neighbor - Right Click - Properties.

It's the computer that doesn't boot up completely. I've had it too. I turned on QQ PC Manager before, and after turning on the computer, before the boot time was not displayed, no matter how I clicked on the broadband connection, it was not reflected. Once the boot time is displayed, it will come out with a click.

It is estimated that you have been connected to broadband, if you want to turn on the phone quickly, you must first disconnect the network and then turn it on, but the moden of the broadband connection is not possible, that is to wait 1-2 minutes, if there is no router, directly connected to the dial.

The method is as follows: right-click the neighbor on the desktop network, Properties, right-click the local connection, Properties, find the Interner protocol (ICP IP) in "This connection uses the following items" and double-click, click "Use the following IP address", enter the IP address such as casual, does not affect dialing), the subnet mask you click to automatically fill in the default value, the default gateway input is casual, does not affect the dial), and it is OK.

The slow boot is due to a lot of junk files, less memory, and a lot of boot items. It's good to optimize.

The broadband connection is because the local connection is not connected, so this will happen to you!