Ask the master The system installation disk is dedicated to Lenovo, how to use it on other computers

Use ultraiso (floppy disk) to open the **Shanghai** version of the image,Extract a total of seven files from the i386 directory,Create a new folder on the desktop named "Vol extract files" to temporarily store the extracted 7 files here。

Of course: there is no limit to what the name of the folder is, just feel free, you can store it anywhere, as long as you can find it, don't find it!!

Open the Lenovo OEM original XP SP2 with this software, copy the 7 files extracted in step 2 to the i386 directory of the Lenovo OEM original XP SP2, and overwrite it, so that it will be successfully replaced, save the image file as, and you're good to go.

Since Lenovo is a brand OEM!! The installation is to use the original serial number of the image.,So it's annoying.,You have to enter it!! Open the new ISO saved in step 3 with floppy drive, in the i386 directory:

Find the file and open it with Notepad, find the serial number of Lenovo and modify it to the serial number of the vol version of the XP without activation, so that you don't have to enter the long and difficult serial number when installing.

After modifying the BIOS, it will be able to use.

Here's a copy for your reference:

Using WindOS XP from Lenovo or other OEMs would have been impossible, but now we can solve the problem of XP detection by modifying the BIOS. In fact, its detection is very simple, as long as there are corresponding bytes in the BIOS file, it can be activated. Therefore, we can do it by modifying the corresponding bytes in the BIOS.

To modify the BIOS and install the OEM version of the XP, the main problem is to first determine the BIOS type of your motherboard, and then you can choose the corresponding modification tool software according to the BIOS type. For more information about determining the BIOS type, see How to Accurately Determine the BIOS Type of a Motherboard Based on Motherboard Information.

BIOS types are divided into Award AMI Phoenix and Intel BIOS. For the relevant modification process and corresponding documents**, please refer to the relevant information in the left sidebar.

Award BIOS is modified with DMICFG DMIscope or Modbin, AMI BIOS is modified with AMIBCP or MMBos, Phoenix is modified with Phoenix Edit, Intel original motherboard is modified with Intel Integrator Toolkit, it should be noted that one modification software may not be applicable to all motherboards. Please try other modification software.

See for yourself All system installations are similar, basically the same.

Lenovo computers use optical discs to reinstall the system, and the operation steps are as follows:

1) Prepare the system CD: If you don't have it, you can go to the computer store to buy it, and you can buy the latest version of the CD of whatever system you need to install. If you have a burning CD-ROM drive, you can also go online and burn the system files in ISO format to a system CD.

2) Set the disc to boot: After booting, press the del key (notebooks are generally F2 or the hotkey prompted at the bottom of the screen) to enter CMOS, and set the optical drive (CD-ROM or ***-ROM) as the first boot item in the boot tab (the old motherboard needs to enter advanced

BiosFeatures tab, in the 1st

bootdevice", then select cd ***-rom), and then press F10 to save and exit the reboot. Insert the system disc into the optical drive in time when you restart the computer.

3) Clone and install the system: After the disc is successfully started, the function menu will be displayed, at this time, select "Install the system to the first partition of the hard disk" in the menu, press enter to confirm and follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop, the computer will automatically run the GHOST software to automatically load the GHO file and clone and install it to the C area, the whole process basically does not require manual intervention, until the last entry into the system desktop.

Note: After the installation of the system is completed, first install security software such as 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other security software, conduct a comprehensive check and kill Trojans and viruses, and then patch the system, install common software, and install a one-click restore tool for system backup, in case of emergency.

f12f11

f10f2 f8

Press these keys and tap them all when you turn them on.

The options will appear. Choose***. Then press enter. And then you will.

Boot. Press delGo to CMOSThen go to BIOSFEATURES

setup sees first

bootsequence.Set to cd-rom

Press F10 again to save and exit. Just reboot it.

1. When reinstalling, the C drive is not formatted.

2. The system disk file is incomplete or damaged.

Suggestion: 1. Find a genuine XP SP3 system to install, if you install a pirated version, after updating the vulnerability, the system will not be able to be used. Because Microsoft is now vigorously cracking down on pirated users.

2. When installing, when choosing which disk to install, delete the C disk, build the C disk, format it again, and install the system again.

Reasons and solutions for not being able to install the XP system:

1) The reason why you can't install XP is: the hard disk mode is different. Because most of the hard disks of computers are serial port hard disks, and the ordinary XP installation disk and the GHOST version of the installation CD, they do not integrate SATA control driver (or some are also integrated, but do not match with the actual SATA control driver), resulting in incompatibility, and the hard disk can not be recognized, resulting in the inability to install the operating system or blue screen normally, so it is necessary to change the mode of the hard disk, change the AHCI to IDE mode, and you can install it normally.

2) Press DEL, go to the BIOS, find advances---sata configaration--stata mode selection--change ahci to IDE F10 to save OK, or select "Devices ATA Drives Setup Configure SATA as IDE", and finally press F10 to save and exit BIOS.