Is it necessary to replace all four tires in the back of the new truck?

It depends on your economic situation, generally, after the new car comes back, all the tires on the car are changed, it is better, and it can be used as a spare tire, in the past, the summer weather is hot, the wear is larger, or the tires with injuries are better not to use, thank you for the reference! Let's get some points!

Most of the tires of today's new cars have few lines and layers, and they do not resist wear and have poor bearing capacity. Suggestion: Replace all tires in your new car if you can afford it, or when the tires are grinding.

The twi indicates the small boss when changing the tire, do not wait until the grinding line is changing. Chaoyang tires are good from ** to wear-resistant, and they are cost-effective. I suggest that you still use semi-steel radial tires, which are only about 50 yuan more expensive than line tires, and the wear resistance is about twice that of line tires.

It depends on the degree of wear and tear of the tire, if there are no external teeth or the outside of the tire does not have that layer of protective film, then you should change it, because the tire has a layer of protective film, a layer of teeth to help you brake the car in time, if not, then your car tires should be replaced, the life of the car tires is generally changed every three or four years, in the short and medium distances you run, then don't change so often, as long as you check the tires and maintain it frequently.

As long as you don't overload, there is no need to change it, and the tires of the new car are just less than the order and do not affect the use.

Do you use 75-16 tires, it should be no problem to load 6 tons of goods, I originally used 75-16 to install about 10 to 12 tons, if you want to change, I suggest you still change the wire tires, the heat dissipation performance is better than the wire tires.

2 points will be awarded for the first time, and reward points and an additional 20 points will be awarded for the answer. Brand tires are good.

With the tire quality department is good, the average driver buys the car, buy it directly, your 600-14 is not used, sell it to the tire repair shop for almost 300 yuan.

If it's a new car, you don't need to replace it, and if you're buying a used car, check the wear and tear of the tires before deciding whether to replace them.

You can run for a while to see the wear and tear and then replace it, why replace the new tires, unless the original tires really can't work.

There are bias tires and wire tires, and their original tires are not market tires, remember! There is a lot of price difference between matching tires and market tires, and market tires are expensive but of better quality. If you want to sell a car, it is recommended to ask them for their original bias tires, that is, nylon tires, do not add money to their wire tires, and after buying the car, go to your local tire store and ask him to discount the price, and you add money for market tires.

It's a good deal. You can also inquire, it's still a good deal. Matching tire tube 3 months to 6 months, the market tire three guarantee from the date of delivery for three years, the store he sells you for two years, if you run the car these should know, right?

The quality of market tires is much better than that of matching tires. I sell tires. If it helps** me, it's not easy to type so many words to earn a point, hehe.

Yes, the tires on the new car are not very good! It's best to change it, but if you get a flat tire on the road one day, it's really troublesome. You can change to 650-14, and it has no effect on the car.

If you change it, you can increase the load capacity and fuel consumption of the car, so it must be a little. You can use your load capacity to determine whether you should change it or not.

Newly bought minivans don't need to change tires when they come back.

The original wheels of the truck are matched with the load, speed, suspension and power of the vehicle use environment, and they do not need to be replaced if they are not special needs.

If you have higher requirements for vehicle performance, such as overloading, want better handling, pursue high-speed performance or better passing performance, you can do the same with changing the tires. However, the performance improvement brought by simply replacing the tires is very limited, and excessive modification will also affect the service life of the vehicle and cause safety accidents, so it is not recommended to overhaul.

As for wanting to replace bias tires with radial tires, or change tubeless tires, it is perfectly possible to change the same size range and improve the performance of the tires.

If the cargo is overweight, it may need to be changed.

Check your tires before you decide!

The tires of the new car are matched, as long as they can be loaded, the car is not crossed, and the factory door can be opened, so it is conceivable that they are all garbage goods, you really want to run transportation, pull goods, from the perspective of safety and load, are not suitable, so new cars must be replaced with new tires.

You're talking about tire rotation, right? Cars are generally worn a little after a period of driving, so transposing tires for this purpose can extend the service life of tires.

The quality deviation of the original tires of the vehicle, if you want to run faster, it is recommended to change the tires, and if you want to use it ordinarily, you can not change it.

Changing tires is not recommended.

bai。First, du's newly bought pickup truck does not need to change tires when it comes back. The original inner wheels of the truck are matched with the load, speed, suspension and power of the vehicle using the environment, and it is not necessary to replace it if it is not a special need.

Second, if there are higher requirements for vehicle performance, such as overloading, wanting better handling, pursuing high-speed performance or better passing performance, it can be achieved by replacing tires. However, the performance improvement brought by simply replacing the tires is very limited, and excessive modification will also affect the service life of the vehicle and cause safety accidents.

The tires of the new truck are very rubbish, and they don't have them in two days"teeth"To put it simply, it is not impatient.

Yes, the degree of wear and tear of the old and new tires is not the same, the new and the old side by side, the new tires will bear more force, resulting in the aggravation of the wear of the new tires, it is best to change the two tires together, or the new tires are slightly lower than the tire pressure side by side.

Principle of Tire Replacement].

1.Same specifications Different specifications of tires have different outer diameters and cross-sectional widths after inflation, and the load distribution is different when installed on the same axle.

2.The same structure The carcass structure of the radial tire and the bias tire is different, and its cushioning performance and circumferential deformation are different. If the two tires are mixed on the same axle, the load will be different and the wear will be inconsistent.

3.The material is the same The material mainly refers to the material of the carcass cord. For example, there are great differences in carcass thickness, cord strength, and heat dissipation performance between all-steel radial tires and fiber radial tires, and they are mixed together to affect the use effect.

4.The same level is the load level of the tire, and the corresponding air pressure standard is determined, the tires with different load capacities are mixed together, the inflation pressure is inconsistent, and the deformation of the tire is also different.

5.The same pattern of the tires is different, not only the wear is different, but also the adhesion to the ground is not the same, the left and right tire patterns of the car are inconsistent, which will affect the smoothness of the car, and there will be unilateral and tail flicking phenomena during emergency braking.

6.The same brand is different from the manufacturer, and the tire hub size, tread width, pattern shape, and cord material have certain differences. Tires of different brands mixed together will affect the use effect.

7.Same air pressure The air pressure is determined by the layer, tires with the same layer should keep the air pressure consistent, inconsistent air pressure will cause different tire deformation.

8.Same load Fitting tires with the same load capacity so that they have the same load capacity can extend the service life of the tire.

The back one can be replaced with one, or it can be replaced with two, and if you change one, the new one is easy to wear. The front wheels must be changed 2 at a time. Now the rear tires of trucks are mostly front tires, and the front wheels must be changed 2 at a time to the rear wheels.

Not necessarily, it depends on the depth of the tire pattern, if a tire pattern is deep and a tire pattern is shallow together, then after loading, the deep pattern will speed up the wear rate of the deep tire, that is, eat the tire.

It depends. Generally for the safety of your life. It is best to replace the front wheels on both sides at once, and replace the tires on the rear wheels if they are still good. Or as a spare tire. [Do not explode the front wheel at high speed because of poor quality. There is no direction. 】

Hello! This depends on the actual use of the tire, if the conditions allow, it is best to replace the four together, plus the proper tire rotation helps to maintain the wear rate of the tire, so that the performance of all tires is consistent. When all of your tires have reached the end of their useful life at the same time, you can replace them with a new set of tires instead of having to be forced to change a pair of tires.

If some tires can still be used, you need to pay attention to the following points when changing tires:

1. In the case of replacing only one tire, the new tire must be close to the depth of the groove of another tread on the same axle, otherwise it may cause problems such as vehicle deviation.

2. In the case of replacing only 2 two tires, it is recommended that the new tires be installed on the rear wheel.

3. Tires of the same specification, structure, manufacturer and pattern should be assembled on the same axle. (Load index, speed level is the same).

New tires should be fitted on the rear axle of the vehicle. Because, if you put a tire with more wear on the rear axle of the vehicle, because the tire drainage capacity is weak, it will greatly increase the risk of oversteer in rainy days, and the risk of vehicle tail spin may occur.

See what's going on. If it is worn out by long-term use, it is recommended to replace two brake wheels or all four. If a tire breaks due to a man-made accident, just replace the broken one.

I heard a Giti tire technician tell me that when changing tires, you should first change the front two tires (driving wheels), put the rear tires in front, and buy two new ones to replace them with the rear wheels, so that the replacement is more cost-effective and effective, hehe.

Change the tires It is best to change the front two together, and the back can be used If the four together, each month four tires are crossed, and the tires should be replaced with the same pattern, otherwise the direction of running.

Depending on the situation of the car, the tire pattern on the same wheelbase can be the same, so at least two should be replaced, [if the spare tire is new, it can also be replaced with the same brand] did not say that all 4 must be changed, but if you are rich, it is best to change 4 together, and you can rest assured that you can drive yourself,

It is not necessary to change 4 tires when changing car tires.

If the tires are not used for a long time, and the tread wear is relatively slight and close to the new tires, you can replace the broken tire.

If the tires are aged after a long time and the tread wear is serious, it is recommended to replace the front and rear pairs or four-wheeled tires. If only a single tire is replaced, it may lead to deviation due to the difference between the old and new tires, and the new tire may wear abnormally.

There is no need, just replace the broken tires, and the replaced tires should be coordinated with the car and the unreplaced tires, and there can be no problems, otherwise it will bring unnecessary trouble to the car and the owner.

Change 2 tires and install them on the rear tires, and use the old tires for the front 2 tires.

<> "Do you have to change four tires for a car?"

In fact, changing tires for a car doesn't have to be four at the same time. However, if possible, it is advisable to replace all four tires together. Because the pattern and wear of the four tires are the same, the car is safer and more stable to drive.

If the conditions do not allow, it is recommended to replace the two tires on the same axis, but it is necessary to ensure that the brand, specification, structure, and pattern of the tires are the same. From a safety point of view, it is advisable to put the new tires in the front and the old tires in the back, at least to make sure that the coaxial tires are the same.

Car tires have a service life, generally 2 to 3 years, or about 6 100,000 kilometers to replace them. In the process of car maintenance, you need to check the air pressure and wear of the tires, usually the air pressure of the tires should be kept between 200 and 280 kappa.

Causes of puncture (1) Insufficient tire pressure. If the tire pressure is insufficient, it is easy to bend and break the sidewall of the tire and burst. If the tire is flat due to valve wear and dust when inflated before going on the road, the tire pressure inside the tire is too low, and it is easy to cause a puncture.

2) The tire pressure is too high. This can cause a tire to burst in a defective area, such as a previously damaged area, which is common in hot summer weather or when driving for a long time. (3) Vehicle overloading.

The harm of overloading the vehicle to the tires is self-evident, especially when we often see some large trucks overloaded on the highway, and the tires are more likely to have puncture accidents. (4) Drive past sharp objects at high speeds. When the vehicle is driving at high speed, the tire rubs against sharp stones or other sharp objects on the road surface, resulting in air leakage and then puncture, which is also a common cause of accidents.

Prevention of Flat Tires (1) The first thing to note is that flat tires don't just happen in the summer. If the tire pressure is too low or too high, excessive tread wear is close to scrap, and the vehicle's tires can burst even on a rumbling winter day. Therefore, avoiding tire punctures should start with daily maintenance.

2) Frequent inspection of tires can play a role in eliminating the hidden danger of punctures. In particular, it is necessary to check whether the tire pressure is within the standard range, not too high or too low. (3) It is necessary to remove stones or foreign objects in the tread pattern groove frequently to avoid the deformation of the tire crown.

Check the sidewall of the tire for scratches and punctures, and whether the cord is exposed.