-
The switch between D gear and S gear is not affected by the speed and road conditions, and there is no need to apply the brakes, so you can switch at any time, but some CVT vehicles have DS sports driving gear in addition to the S button on the gear lever, which is a bit similar to low gear (L gear).
S gear: Sport mode (Sport) driving gear, mainly by increasing the speed delay shift to increase the driving pleasure of the car, or short-term overtaking, the gearbox will automatically select a different gear ratio, can also be simply understood as directly reducing a gear, so that the engine speed as far as possible in the maximum torque speed range, to power output, if a long time of high-speed driving, will increase fuel consumption.
-
<> automatic transmission D gear to S only need to press the gear lock, no loose oil and no brake.
1. P to R, R to P should press the gear lock and brake; R to N do not press the gear lock, no need to brake.
2. N to R should press the gear lock and brake; N to D to press the gear lock, to brake.
3. From D to S, press the gear lock, no loose oil and no brake; S to D can be pushed directly, no loose oil and no brakes.
4, d (+, to d do not need loose oil, do not need to brake, do not press the gear lock, directly dial. After dialing it back, it will change to the appropriate gear in D gear according to the speed, torque, etc.
5. D to D (+, no loose oil, no brakes, no need to press the gear lock, direct dialing. After pushing it over, it is directly the file corresponding to the D file.
Bit. 6, d (+, plus and minus gears do not need to press the gear lock, do not need to loosen oil and do not brake. But I haven't stepped on the red line, so I don't know if it will break automatically.
Oil. Only P and N can be ignited, but any gear can be turned off.
-
Automatic gear D gear is directly switched to S gear, no need to release the accelerator, step on the brakes, and no need to stop, but it is recommended not to switch from D gear to S gear when the vehicle speed is high and the engine speed is high.
D gear is also called forward gear, drive gear, S stands for sport mode, when the gear lever is hooked into S gear, the engine speed will remain in the higher speed range, which is the so-called high speed. The so-called S gear is to let the car have more power to carry out some actions, such as overtaking, climbing, etc., generally means increasing the speed and lowering the gear.
Most of the road conditions of the automatic transmission car can use D gear, automatic transmission car D gear must be lowered when changing L gear, L gear is a low speed gear, on a large steep slope can be used, the car can get greater traction to ensure the completion of the uphill; When going down a large steep slope, you can use L to control the speed of the vehicle with the engine to prevent the brakes from being hot. The L gear is equivalent to the 1 2 gears of the manual transmission car, and the gear can not be hung when the speed is fast, otherwise it will have an impact on the gearbox. It is possible to park or put in L gear at low speeds.
The S gear actually plays the role of letting the automatic gear drop one gear in the current gear, thereby improving the climbing power and overtaking power. The D gear of the automatic transmission car is the most used gear, and it can be used in general road conditions. Automatic cars are not allowed to coast in neutral gear, on the one hand, it is very unsafe to coast in neutral gear.
On the other hand, when the automatic transmission car is put into neutral, the lubrication system cannot lubricate the fast-running gearbox enough, and the neutral slide will overheat the transmission.
Photo by Li Yuanli) @2019
-
The BAI switch between D gear and S gear is not affected by the speed and road conditions, and it does not need to step on the brakes, and can be switched at any time, but some CVT vehicles have DS sports driving gear in addition to the S gear button on the gear shift lever, which is a bit similar to low gear (L gear).
S gear: Sport mode (Sport) driving gear, mainly by increasing the speed delay shift to increase the driving pleasure of the car, or short-term overtaking, the gearbox will automatically select a different gear ratio, can also be simply understood as directly reducing a gear, so that the engine speed as far as possible in the maximum torque speed range, to power output, if a long time of high-speed driving, will increase fuel consumption.
-
d (drive) forward gear, also known as drive gear:
dIn this gear, the gearbox will automatically switch according to speed and throttle in 1 overdrive gear (equivalent to 1 4th gear), which is used on general roads. Due to the different designs of different models, the "D" gear generally includes from 1st gear to high gear or 2nd gear to high gear, and will automatically change gears due to changes in speed and load. By placing the paddle lever in "D" position, the driver can control the speed of the car as long as the accelerator pedal is controlled.
By placing the gear selector lever in the D position during normal driving, the car can automatically shift between 1 and 4 gears (or 3rd gear). The d-position is the most commonly used driving position. What needs to be mastered is:
Since the automatic transmission is geared according to the size of the throttle and the speed of the vehicle, the speed of the vehicle when changing gears varies depending on how the accelerator pedal is operated. If you quickly press the accelerator pedal when starting, the upshift is late, the acceleration ability is strong, and after reaching a certain speed, the accelerator pedal is quickly released, and the car can be upshifted immediately, so that the engine noise is low and the comfort is good. Another feature of the D position is that the forced low gear, which is convenient for overtaking at high speeds, and the accelerator pedal is quickly pressed to the end in the D position driving, and the forced low gear switch can be automatically downshifted, and the car accelerates quickly, and the accelerator pedal can be automatically upshifted after overtaking.
s stands for sport mode
S indicates Sport mode, in which the gearbox can shift freely, but the opportunity to change gears is delayed, so that the engine can be kept at high revs for a longer time, so that the vehicle is more powerful. Of course, this obviously results in increased fuel consumption.
Usually, you use the D gear, but if you want to experience the feeling of movement such as instantaneous acceleration, you can use the S gear, and you can switch it directly.
-
D is the normal forward gear of the car complex, and the S gear is the sport gear of the car, and the S D can be switched at any time, but it is recommended not to do this when the engine speed is high.
Generally, the gears of automatic transmission vehicles are p, r, n, d, s:
p Parking gear. When the car is parked, the gear selector lever must be pulled into the P position.
rReverse. n Neutral. The n position is equivalent to neutral and can be used when starting, when people are not leaving the vehicle and parking, or when towing a vehicle.
d Forward gear. When driving normally, the gear selector lever is placed in the D position, and the car can automatically shift between the forward gears. D is the most commonly used gear.
S gear is the sport mode of the car ("s is"sport"In the S-gear sports mode, the gearbox can shift gears freely, but the opportunity to change gears is delayed, so that the engine can be maintained at high rpm for a longer time, so that the car can travel at low gear and high rpm for a longer time, and then obtain greater torque output and acceleration. As the car is moving, it pushes the gear knob directly in"S" gear is sufficient, and is usually used on hill climbs and when overtaking speeds quickly.
-
Can I switch from D to S directly? Automatic cars are not that simple, and being careful that making a mistake can ruin the car.
-
Change it at any time, and it's best to put on the throttle. Here it is.
-
If you drive an automatic car, switch from D gear to S gear, and you don't need to step on the brakes or step on the accelerator, if the speed is too high, you can loosen the oil a little, which can reduce the cushioning force in the transmission shift process and avoid the feeling of frustration in the body when changing gears. After waiting for the car to enter S gear, you can keep up with the throttle and increase speed.
When you switch to S gear, the gearbox delays the upshift, allowing the engine to deliver more power. That is to say, with the same force to press the accelerator, the gear selected in D gear will be higher than the gear selected in S gear, and after stepping on the accelerator, the response speed of D gear and S gear is also different, S gear is faster and more sensitive, so that the car can achieve high power in a short time.
-
D to S to press the gear lock, no loose oil and no brake.
Switch between gears:
1. P to R, R to P should press the gear lock and brake;
2. R to N do not need to press the gear lock and brake.
3. From N to R, press the gear lock and brake.
4. From n to D, press the gear lock and brake.
5. From D to S, press the gear lock, no loose oil and no brake.
6. S to D can be pushed directly, no loose oil and no brakes.
7, d to d (+, no loose oil, no brakes, no need to press the gear lock, direct dial. After pushing it over, it is directly the gear corresponding to the D gear.
8, d (+, to d do not need loose oil and no brake, no need to press the gear lock, direct dial. After dialing it back, it will change to the appropriate gear in D gear according to the speed, torque, etc. That is to say, the 3rd gear of d (+, 5000 rpm, may be cut to d is 5th gear 2000 rpm.
9, d (+, plus and minus gears do not need to press the gear lock, do not need loose oil and do not brake. But I haven't stepped on the red line, so I don't know if the oil will be cut off automatically.
Only P and N can be ignited, but any gear can be turned off.
-
Hehe, at first glance, you are a newbie.
First of all, I will tell you what these gears are:
What's the matter, D gear is the forward gear, under normal circumstances, you can use this gear to drive all the way forward, whether it is high speed or low speed, because the computer will automatically switch gears according to the situation of the vehicle. S gear refers to the sports gear, if you change to this gear, the vehicle's handling will be better, the sense of acceleration is better, but generally do not need to use, at present, most of the car can be directly changed from D gear to S gear during the vehicle driving process, and can also be changed from S gear to D gear, which has no impact on the car. R gear is a reverse gear, and the vehicle must stop before shifting to this gear.
N gear is neutral, P gear is parking gear, L gear is low gear, low gear generally uses first and second gear, generally used when going up a slope.
-
When you say s, it should be p, right? Parking, parking stalls. The process of changing from D to P:
1.Foot brake, the car is stopped and hung to N (neutral); 2.pull the handbrake; 3.
Feet let go of the brakes; 4.Hit the brake again and put the gear from N to P.
-
Why shift gears? Generally, you can drive normally in D gear, unless you catch up with a steep slope or a very muddy road and switch to S gear, just move directly from D to S gear. Also, be careful not to move the car to N gear until it is stationary.
-
I feel so annoyed by cropped pants, winter ** milk powder is opened, you have paid for more than ten years, and the third-order Rubik's Cube Mogao Grottoes.
-
If an automatic transmission vehicle wants to shift from D to S while driving, it needs to press the gear lock without releasing the accelerator or braking.
The automatic stool is not used by the driver to manually change gears, and the vehicle will automatically select the appropriate gear according to the speed and traffic conditions. D gear refers to the manual mode of the automatic manual transmission, which can be used to manually control the upshift and downshift of the gearbox, and there is no need to press the brake or release the accelerator when using the D gear.
S gear is the sport mode of the car, in the S gear sport mode, the gearbox can shift freely, but the opportunity is delayed when shifting, so that the engine can be kept at high rpm for a long time, so that the car can travel at high speed in low gear and high destruction for a long time, and then obtain greater torque output and acceleration.
Car gears
Automatic transmission cars are generally divided into 7 gears, including P, R, D, N, L, S, M gear, P gear is the parking gear, Zaonian sliding R gear is the reverse gear, D gear is the forward gear, N gear is neutral, L gear is the low-speed gear, generally used when downhill or traffic jams, M gear is the manual mode, the driver can manually switch gears, and the S gear is the sports mode.
If the car needs to move from S to D, just push the gear lever without releasing the throttle or braking. Automatic transmission cars are better to operate than manual transmission cars, but in fact, there are skills in gearing, when hanging P gear and R gear, it is usually necessary to step on the brakes, and there is no need to step on the brakes to switch between forward gears, if the car has just started, even if it is in D gear, you also need to step on the brakes.
-
D is the normal forward gear of our car, S is the sport gear of the car, D gear and S gear can be switched at any time, but it is still recommended not to do this when the engine speed is high. D (drive) forward gear, also called active gear: gear, also called active gear:
In D gear, the car's gearbox will be equivalent to 1 to 4 gears, and it will automatically switch depending on the car's speed and throttle. Most owners of D-gear are generally used to driving on ordinary roads. However, due to the different design of the models in each country, most of the "D" gears are from first gear to high gear or from second gear to high gear, and will automatically change gears due to changes in speed and load.
Push the joystick into "D" gear and the driver can control the speed by simply grasping the accelerator pedal. If the gear selector lever is placed in D gear during normal driving, the car can shift back and forth between 1st and 4th gear (or 3rd gear); D gear is the most commonly used driving position. What we need to know is:
Because the automatic transmission determines the gear based on the size of the throttle and the speed of the vehicle, the speed of the accelerator pedal when changing gears is different depending on the way the accelerator pedal operates. However, if you press the accelerator pedal quickly when starting, the acceleration will be relatively late, and the acceleration ability will be stronger. After reaching a certain speed, release the accelerator pedal, at this time the car will immediately upshift, so that the engine noise is low and the comfort is good.
Another feature of the D position is the forced low gear, which is convenient for high-speed overtaking. When driving in the D position, quickly press the accelerator pedal to the end, turn on the forced low-gear switch to automatically downshift, and the car will also accelerate quickly. After overtaking, release the accelerator pedal and upshift automatically.
Hit the brakes, hang D gear and go, r is backwards, n is empty.
Of course, there is a clutch system, but it is the structure inside the gearbox, which is automatically adjusted with the speed of the vehicle and the opening of the throttle position! >>>More
S is Sport, which means sport mode, when this gear is engaged, the gear can be switched freely, but the timing of the shift is delayed, so that the engine can maintain high revs for a period of time, so that the power of the car increases. >>>More
Buick Envision Automatics L gear refers to the low-gear mode of the transmission. >>>More
Resolutely put an end to this kind of operation, which will damage the planetary gears, and seriously lead to the scrapping of the gearbox Gliding in neutral gear is nothing more than to save fuel Now the cars are EFI, when you completely release the throttle at the same time, the electronic control system will automatically take oil cut-off protection to reduce fuel consumption, and the automatic transmission car is even more so When the throttle is released, the nozzle will stop the injection of gasoline into the cylinder, and when the speed drops to a certain level, the electronic control unit will let the nozzle resume fuel injection, and at least ensure the operation of the engine at idle speed The automatic transmission car can not only reduce fuel consumption by sliding in N gear, but also damage the gearbox, resulting in increased gear wear, which outweighs the loss >>>More