What if the floor of the room will be damp and the clothes will get moldy?

Afternoon is the best time to close the doors and windows facing south or southeast on rainy days to reduce moisture entering the room. At noon, the air humidity outside is at the highest value, and it is not appropriate to open the window, so it should be opened in the afternoon or evening, when the climate is relatively dry, open the window to adjust the indoor air.

Lime moisture absorption: On rainy days, quicklime can be wrapped in cloth or sacks and placed in various places indoors to keep the indoor air dry.

Air conditioner dehumidification: It is simpler than the previous two methods, but now that it is in the season of power shortage, it is recommended to use other environmentally friendly moisture-proof methods to save energy.

Moisture-proof gadgets.

Moisture absorbent box is essential for wardrobe dehumidification. The more common hygroscopic products on the market are generally made of calcium chloride granules as the main content, and most of them also add flavor ingredients, so they integrate functions such as dehumidification, aromatherapy, mildew resistance, and deodorization. Moisture absorber boxes are mostly used for moisture absorption in wardrobes and shoe cabinets.

To use it, simply put it in the cabinet.

Moisture Absorbent Packs work best in confined spaces. The principle of the hygroscopic bag is similar to that of the humidity absorbent box, but the contents are mainly water-absorbing resin, and after absorbing water, it becomes jelly-like and is not easy to disperse into pieces. In addition to clothing, leather goods, stamps, cameras, pianos, computers, audio-visuals, etc. can be used to help dehumidify.

If placed in a confined space, the moisture absorption effect is better.

Moisture-proof new products.

The National Forestry Research Institute of Japan has developed an environmentally friendly device for effective dehumidification: dehumidifying floor films. This film, which is made from crab shells with a thickness of only 30 microns (1 micron equals 1 millionth of a meter), is characterized by the fact that only water vapor can pass through.

Based on this characteristic, the moisture contained in the floor can be effectively removed by reducing the pressure with a vacuum pump on the other side of the film. If two square meters of this film are used, it is possible to keep the humidity of a floor with a thickness of 5 cm and an area of 50 square meters below 60 to 65. In general, if the humidity of the wood can be maintained below 60 to 65, then the wood does not need to be preservative.

The components of the film are naturally decomposed by microorganisms, so they do not cause environmental pollution even if they are accidentally buried in the soil. In addition, the use of this film can significantly save energy compared to the conventional method of using an air conditioner to reduce the temperature and condense the moisture in the air. This dehumidifier is expected to improve the durability of building materials, and Japanese building materials manufacturers and real estate developers plan to commercialize it within five years.

The best and easiest way is to go to the mall and buy a dehumidifier. It can be installed with sand windows to prevent mosquitoes

Ha ha! The best way to do this is to take it out and dry it often!

Or wash it! I knew that!

Keep some desiccant in your closet. Let the sun shine on the house.

Of course, you should get more lime or desiccant in the room.

1. You can go to the supermarket to buy some desiccant.

and activated carbon, which can be used to prevent moisture and absorb moisture. After the clothes are moldy, some mold spots will form locally, and if the cotton clothes are moldy, they need to be taken out and scrubbed repeatedly.

2. If you want to alleviate the damp situation indoors, you can buy some lime, tie it with a small cloth bag and place it in all corners of the room.

3. Air conditioners used at home generally have the function of dehumidification, and sometimes air conditioners can also be used to dehumidify.

4. Buy an air dehumidifier to effectively alleviate the humidity in the room.

5. When the outside moisture is particularly heavy, doors and windows should be closed to prevent moisture and moisture.

6. Usually open more windows for ventilation and ventilation to reduce indoor water vapor.

Content. <>

1. The best way is to bring a vacuum cleaner at home, if you only remove the dust on the surface, you can use the vacuum cleaner directly, or you can buy a cloth with adsorption function and dry wipe.

2. If the wooden floor is stained, you can choose a natural solvent to dissolve, and then wipe it dry, in short, the solid wood floor should not be cleaned with water as much as possible, so as to make the wooden floor look healthier.

3. The wooden floor is most afraid of corrosion, if you mop the floor with a wet mop, the moisture will invisibly penetrate into the surface of the floor, once or twice is not a big problem, but if it lasts for a long time, it will gradually corrode the wooden floor, causing the internal surface of the floor to fall off and so on.

4. The wooden floor may be stained with dirty things that the mop cannot wash off at one time, at this time, do not use steel wool balls to wash clean, laundry detergent, detergent and other chemicals, which will form the surface wear of the wooden floor, and can not clean the floor well, and the furniture will be moldy, and even harm the wooden floor.

There are two ways to treat the mildew of the wooden floor, if it is only mildew on the surface, you only need to use homemade detergent, mix the warm bleach with water in a dilution ratio of 1:3, and only need to wipe it with a soft rag after dilution is even, because bleaching has the function of bleaching and disinfection, so the concentration should not be too high, too high will hurt the surface of the floor and cause fading, for the local and internal mildew of the floor, it is too serious to replace the new floor, but the most important thing is to prevent moisture on the floor. In daily care, it is necessary to pay attention not to leave too much water and close the windows and doors even on rainy days, so as to effectively and completely eliminate the mold of the floor.

If the wood floor is moldy, it needs to be scraped off the mold, let it dry, and then polish, if there is a defect, it needs to be repaired and leveled, and then sprayed with self-spraying paint after drying again.

The temperature difference between day and night leads to a resurgence of moisture, which is damp and not ventilated, and is very easy to mold.

If you have mold, you must clean up the mold first, otherwise the mold will multiply in large numbers, and other places will soon be covered with mold.

However, if you can't clean it with a soft brush, you can use a mold remover to clean it. It is best to spray anti-mold spray after cleaning to prevent mold from growing again.

If you want to renovate, you must also clean up the mold first, spray the anti-mold agent, and then renovate, otherwise the mold will still grow from the inside to the outside.

Hello, the big water reminds you that it's time to change the floor! The most feared thing about wooden floors is water. As long as it is blistered, it is basically useless. In particular, there are hidden dangers in strengthening compounds, and other types can be used even temporarily. So let's change it.

Ask what to do if there is a musty smell in your home.

With an aromatherapy oil or air freshener, you can quickly mask musty odors in your room and create a fresh space to breathe. Method 3: Place some activated carbon, which can effectively absorb pollutants in the indoor air and prevent the appearance of musty smell in the room.

Method 4: Put the sun-dried tea residue into a gauze bag and place it everywhere, which can not only remove the musty smell, but also exude a trace of fragrance.

If the floor at home is damp, it is indeed difficult to solve this problem at one time, it is recommended to replace the floor again, otherwise it is easy to cause various bacteria.

If the floor is damp at home, you can dehumidify it by closing the window, spreading newspapers, turning on the air conditioner to dehumidify, and mopping the floor with salt. Basically, there is always a period of time in the year when it is particularly humid, and it is easy for the floor to get wet, and the damp floor has a great impact on the service life of the floor. If you want to better understand the damp floor at home, if there is any way to solve it, you can continue to look down.

1. Close the window appropriately: In a relatively dry climate in the afternoon, you can briefly open the window for ventilation at this point in time, so that the air tiles can be teased in the sun and accelerate the evaporation of water, so as to achieve the effect of dehumidification.

2. Spread waste newspapers: In addition to closing the windows at home, sprinkle waste newspapers on the wettest ground at the bathroom door and kitchen door, which can absorb the water on the ground and dry the water on your shoes, killing two birds with one stone.

3. Dehumidification with air conditioner: If the room is humid, you can turn on a small solar heater or air conditioner to increase the indoor temperature, increase the moisture content of the air when the temperature rises, and increase the moisture in the air.

4. Salt water mopping refers to the state land: prepare a bucket of water with a water temperature of about 40 degrees Celsius, then add a spoonful of salt to the water, stir it slightly until the salt is dissolved, and you can start mopping the floor.

The impact of mold on the floor on the living environment cannot be ignored. Moldy may cause allergies and even respiratory diseases in the human body, so it is very necessary to deal with moldy floors in time. Here are some ways to deal with moldy floors:

1.To remove mold: Use water, white vinegar, alcohol, bleaching powder, or other detergents containing disinfectants and spray them directly on moldy areas.

Use a cloth or cleaning brush to wipe gently. It should be noted that when using bleaching powder, the concentration should not be too high to avoid damage to the floor.

2.Eliminate moisture: If the floor has been in a humid environment for a long time, in addition to removing mold, the problem of moisture needs to be solved. You can use dehumidifier or some detergent with moisture absorption and exhaust effect to fully eliminate the moisture in the room.

3.Increased ventilation: Ventilation is an important measure to prevent mold on your floor. Before installing the floor, a waterproof layer and a breathable layer can be added under the floor to effectively prevent moisture from growing. In daily life, it is possible to open windows frequently for ventilation and reduce humidity.

4.Do a good job of cleaning: Keeping your room clean and hygienic is the best way to prevent mold on your floor. You can clean the floor with a vacuum cleaner or rag every week, wipe the floor with warm water, and do a deep cleaning regularly.

In everyday life, it is very important to prevent mold on the floor. Always pay attention to the humidity of the room and keep the room ventilated and clean, so as to effectively prevent mold on the floor. If the floor has become moldy, it is necessary to take measures to remove it in time to prevent the spread of mildew and continuously improve the quality of the indoor environment.