What is the trick to moisture proof wooden flooring?

1. Choose moisture-proof flooringMoisture resistance is the most important technical indicator of sports wood flooring. The floor with poor moisture-proof performance will be damaged by the "steaming" of geothermal heat for a long time, once moisture enters, the edge of the floor will be warped. The high-quality floor is made of high-density substrate, which has excellent moisture-proof performance and the expansion rate of water absorption thickness is much smaller than the national standard.

In addition, the special wear-resistant layer, decorative paper and balance layer can well "seal" the substrate and ensure the overall moisture-proof performance of the floor.

2. Install moisture-proof correctlyThe quality of the flooring is determined by 70% of the quality of the flooring due to the quality of the sports wood flooring. The unsatisfactory use of the floor is largely caused by the inadequate floor pavement, and the problem of floor paving has become a stubborn disease that restricts the use of the floor. The installation engineer of the sports wood floor must carry out four different aspects of the measurement preparation, which can enhance the accuracy and precision for the later construction, and can effectively detect the specific degree of the five major problems of the ground, such as "sand, tide, concave, convex and crack".

In addition, the staff should pay special attention to the flatness of the ground, if the ground is guaranteed to be flat, there is no arch under the floor; If the floor is not wet, the floor will not swell, and these must be carefully inspected.

3. Control indoor humidityIn the rainy season, the temperature and humidity of the air change, the floor is easy to expand or contract, and controlling the humidity in the room is the most scientific and effective way to prevent the deformation and arching of the solid wooden floor. Industry insiders suggest that the floor is moisture-proof, and the floor can be mopped with a non-dripping mop to directly humidify the floor, or the window can be closed and humidified with a humidifier. It can also be in the afternoon or evening, when the climate is relatively dry, open the window to adjust the indoor air and make the room intermittently ventilated.

First, choose a good paving time.

The selection of the season of the basketball court wood floor is very important, because the floor itself is made of natural wood, and the requirements for ambient temperature and humidity are relatively high, and the improper installation time can easily lead to various problems in the future use of the basketball court wood floor.

Second, do a good job of preparing before paving.

1.Ground treatment before paving.

The foundation floor of the venue needs to be cleaned before paving. First of all, clean the cement on the ground, scrape the putty, and try to keep the floor flat; Then clean the floor to remove oil stains or dust and sand from the surface of the floor to ensure that the floor is clean. It is best to brush a layer of dilute cement slurry before paving, remove the stains on the floor, and then pave after the cement is dry, and the moisture content of the general ground base shall not exceed 15.

2.Moisture-proof treatment of the material.

Material preservation is important. Basketball court wooden floor should be stored at room temperature for two days before paving, do not save money, the wet basketball court wooden floor is dried and then used, such a floor is not only easy to mold, the service life will be greatly shortened, on the reverse side of the floor is coated with a layer of moisture-proof protective paint, to prevent the paved ground from affecting the floor, resulting in the situation of floor hollowing.

Third, the paving method is exquisite.

When installing the wooden floor of the basketball court, it is necessary to reserve shrinkage joints, except for the floor expansion joints of about 1cm between the floor and the wall. The gap between the floors should also be reserved for gaps, generally not more than 1mm, and when the floor with higher density is laid, each piece should be left with a gap to prevent future arch deformation.

Fourth, it is necessary to protect after paving.

It is not to do a good job of moisture-proof work after the floor is paved, pay attention to protection after paving, within 48 hours after the wooden floor of the basketball court is paved (generally this period of time becomes the health period of the floor), it is necessary to avoid walking around often on the floor and placing heavy objects, so as to leave enough time for the floor adhesive to be firmly pasted and let the floor dry naturally. In this way, the floor will be natural and durable.

Hello Moisture protection tips for wooden flooring There are mainly the following 3 points:

First, before the wooden floor is paved, it is best to put a layer of moisture-proof cloth and a layer of moisture-proof mat before the floor is paved. Through two layers of moisture-proof treatment, the moisture on the ground can be well separated from the floor;

Second, due to the reason of thermal expansion and cold contraction, when summer comes, the wooden floor will have different degrees of expansion. Therefore, if you are laying wooden floors in spring and autumn, you must ask the installer to leave enough expansion joints, the size is generally 1 cm. In this way, when summer comes, the floor will not be lifted because there is no space to expand;

Thirdly, when paving wooden floors, there are also certain requirements for the selection of baseboards, and the thickness is best in centimeters. In this way, it is possible to ensure that there are enough expansion joints for the floor during thermal expansion and cold contraction. In addition, if the floor area is more than 8 square meters, a divider should be set up to separate the excessive area, which can also play a good role in preventing the floor from bulging and deformation.

The first floor is more comprehensive.

The advantages and characteristics of wood flooring make it a favorite floor decoration material for many people, but many people do not know what should be paid attention to when using wood flooring. Tell everyone that the most feared thing about wood flooring is moisture, which will cause various problems on wood floors.

If you don't pay attention to moisture, your wooden floors may warp. Wood products are absorbent, the surrounding environment is too humid, they will absorb more water, the volume will also expand, and eventually lead to deformation, it can also be said that solving the problem of moisture is the fundamental problem to prevent the wood floor from warping. Too much moisture can also make the floor moldy, which not only gives off a musty smell, but also has a certain effect on our body, because fungal metabolism produces toxins.

Humidity can also lead to a serious result, that is, wood insects, humidity is a necessary condition for the growth of insects, moisture is done, and the problem of insects is solved. In addition, the damp wooden floor is smooth. If you are not careful, you may fall, and if there are elderly people and children in the house, you need to pay special attention to this.

It is very important for wood flooring to be moisture-proof, how can wood flooring be effectively moisture-proof? Here are a few ways to do it.

Wax the floor. Waxing can repair the cracks on the surface of the wooden floor, play a role in protecting the floor: it can also improve the gloss of the floor, increase the decorative effect of the floor; In addition, the wax layer protects the floor from moisture.

Generally speaking, the waxing frequency of new flooring is a little more intensive, while the waxing interval of old flooring can be a little longer. When cleaning the floor, pay attention to the amount of water used, never splash water on the floor, it is best to use a dry cloth to clean. If a lot of water is used in cleaning, open the doors and windows to ventilate after cleaning.

In addition, a layer of moisture-proof film or activated carbon is applied to the wooden floor, which can effectively absorb moisture. What's more, they not only absorb moisture from the air, but also from the floor, killing two birds with one stone.

1. Aluminum alloy keel.

It can use high-quality aluminum alloy keel, exclusive design patented products, and the lower groove is inserted into Kaijie multi-point conical shock absorbing pad, which is easy to install, and the position of the rubber pad is adjustable, and the rubber pad will not be damaged by long-term handling and movement, so as to ensure the stability of the structure of the floor. The aluminum alloy keel will not cause the keel to deform due to the quality of the use environment, and the whole structure is more stable than the wooden keel.

2. High-quality rubber pads.

High-quality rubber can be used, with high purity, no peculiar smell, moderate softness and hardness, which not only ensures the elasticity of the floor to better protect the human body, but also makes the floor structure stable and ensures the rebound of the ball. 30 years without aging. High-quality rubber, whether it is underfloor heating, high temperature or underground humidity, does not affect the performance and stability of the product.

Hardwood flooring. 3. Ousong plate support.

The support plate plays a stable role in supporting the entire sports wood floor structure, and the force on the surface floor can be evenly dispersed, so the failure of the support plate directly determines the performance of the floor. The selection of Ousong board as the support plate of the whole system, Ousong board has excellent moisture-proof performance, because the processing technology of Ousong board is to design and process high-quality logs into long strip planing through equipment, and refined by deoiling, drying, sizing, directional paving, high temperature hot pressing and other processes. The selected Ousong plate products are stable and environmentally friendly, ensuring the performance of the whole system.

The moisture-proof performance is incomparable to ordinary plywood.

4. Maple surface flooring.

Solid wood sports flooring, surface flooring, is not only the face embodiment of the whole project, but also determines the performance and service life of the whole product.

At present, the selection of professional sports wood flooring in stadiums in the world is mainly maple or oak, but large-scale competitions, professional competition-level gymnasiums are all using maple flooring, mainly because of the moderate density of maple, the texture is distinct, and the tensile performance of tree fiber is good.

Take precautions before installation.

As we all know, when decorating, the decoration team will recommend that the bottom layer of the wooden floor be covered with asphalt and linoleum paper, and then a layer of cement will be sealed on the surface to prevent the release of harmful gases. Here is the easiest way, sprinkle the insect powder on the dry ground, and spread a thick moisture-proof film, because the moisture-proof film is generally about 5 10mm thick, which can effectively prevent the penetration of underground moisture, and at the same time take into account the position of the wall foot. If you want to prevent moisture more thoroughly, and then spread a layer of activated carbon, don't underestimate activated carbon, it can have the effect of absorbing moisture and insects, not only effectively preventing the deformation of the floor, but also absorbing indoor smoke and odor, adsorbing carbon dioxide, and improving the air quality in the room.

Wooden flooring "surface work" to do well.

After doing a good job of moisture-proof at the bottom layer, the next step is to do moisture-proof on the surface of the wooden floor. The easiest way is to wax our wooden floor, waxing can not only make up for the scars left on the wooden floor in our daily life, improve the brightness of the floor, but also the wax itself has the function of waterproof and moisture-proof. The number of waxing can vary depending on the old and new floors, the new wooden floors are beaten every half a month or a month, and after 3 or 4 waxes in a row, you can wax every six months like the old floor, so that you can effectively prevent moisture.

If you want to go a step further and protect against moisture, you can put a moisture-proof film on our wooden floors.

1. Ground moisture-proof treatment method:

Generally, "three layers of oil and two felt" (three layers of asphalt and two layers of linoleum paper, and then a layer of cement is smeared on top to prevent the release of harmful gases); The simple treatment method is to apply a moisture-proof film.

2. Balance the plate expansion by installation:

Some add a layer of splint to the keel, some use aluminum alloy keel, some require springs in the expansion joints of the wall floor, some require wide gaps between the plates, some require traps to be left at the four corners of the room to facilitate the release of moisture, and some adopt the installation method of track-type wooden flooring.

3. Plate moisture-proof treatment method:

The back plate is painted and waxed, and the aluminum-platinum and plastic-coated are nanotechnology.

Solid wood floor maintenance method 1:

The moisture-proof of solid wood flooring mainly includes two aspects: one is the moisture-proof treatment during paving, and the other is moisture-proof during ordinary use. When laying wooden floors, it is necessary to lay a moisture-proof film, apply moisture-proof oil, and do not use damp plywood and wooden fangs.

Pave floor tiles or stones on the floor of the door in the kitchen, toilet, etc. as a transition to prevent moisture from entering and exiting, and reduce the moisture process near the floor at the door.

Solid wood floor maintenance method 2:

There are also ways to improve the surrounding environmental conditions. If the outdoor humidity is greater than the indoor humidity, you can close the doors and windows to keep the indoor humidity low, and if the outdoor humidity is less than the indoor humidity, you can open the doors and windows to reduce the indoor humidity. In humid and muggy weather, you can turn on the air conditioner or electric fan, which will also reduce the humidity.

But if the weather is dry or the air conditioner is used for a long time, then it is not moisture protection but moisturizing that should be considered. Because the humidity in the room is low in this case, it will cause the solid wood floor to shrink or crack. At this time, you can use a damp mop to mop the floor to keep the solid wood floor a certain amount of moisture.

Another issue that needs to be noted is that the floor and walls of the newly built buildings have a large moisture content, so more ventilation should be provided to make the floor and walls dry as soon as possible.

Solid wood floor maintenance method three:

In daily life, it often happens that you accidentally spill water on the ground, so you don't need to be nervous, because as long as the amount is not large and the time is not long, it will not have any impact on the floor, as long as it is dried in time. If it is rainy or humid in the south, some people will worry about the increase in the moisture content of the solid wood floor, which will cause expansion and deformation. In fact, the solid wood flooring on the market is now basically treated with paint, and the ability of the floor to absorb moisture is greatly reduced, and the increase of moisture content requires a long time and process, so consumers do not have to worry too much.

Solid wood floor maintenance method four:

In addition, choosing the material of solid wood flooring according to the environment is also a wise move to prevent moisture. For example, in more humid areas, you can choose materials with low deformation, such as teak flooring, etc., and choosing high-quality floor paint is also a very effective way to prevent moisture.