How do you transition between floor tiles and floors?

1. Copper strips can be considered for closing and pressing the surface.

Copper strips for wooden floors are closed and pressed. This copper bar is sold in stores that sell wood flooring, and it is not expensive. It will not rust, and it can be directly applied to the glass glue.

2. The threshold stone of the stone can be considered.

Spend more than 200 yuan to add a marble threshold stone for transition, and it can be a good disconnection of the division of space.

Note that in the stone, the hardness of granite is relatively large, and in the decoration, most of the stones such as Indian red, Chinese red, and black gold sand are used to make threshold stones. Not only the hardness, but also the color, texture and other factors.

3. Mosaic closure can be considered.

Mosaic has glass and stainless steel, from the original simple color, now it has developed into multiple patterns and diversified materials.

This method can not only be decorated, but also embellishment elements and increase the joy of life.

4. The staggered layer method of high and low can be considered.

This will also allow for a natural transition, but there will be a difference between high and low.

Note that this method creates a step, if there are children, the elderly, or those with inconvenient legs, it is better not to use this method.

5. Stainless steel plates can be considered.

You can fold the plate, for example, you can use tea steel, black steel, titanium and other color steel, which is commonly used for home design with a first belt type and full of personality.

Now with the progress of technology, the sill stone of stainless steel plate has been integrated into the process, such as text, carving, etc.

6. Pure solid wood can be considered.

The transition method of solid wood is similar to that of marble. Pure solid wood is excessive, compared to wood floors, floor tiles, and marble, ** is more expensive, but the foot feeling will be better. If the home is relatively dry, you can use this method if it is not damp.

May I ask if the height reserved for bedroom leveling is 12mm lower than the floor tiles in the living room, should I lay 8mm or 12mm floor? Do you need to make stone strips for the transition between floor tiles?

Yes, the floor that I installed yesterday has a copper bar at the junction with the tiles.

You can add a doorway stone in the middle to overdo it, or the way to save trouble is to add a side strip.

You don't need to level it, just use the floor buckle, and there are special buckles for excessive unevenness.

Hehe, I don't think you need to, you can incorporate your own elements into what you like! Just actually!

There are two ways to do this:

1. Leave 3 5 cm joints between the tiles and the floor, and fill the joints with glass glue. This method is natural and effective.

2. Use the T-shaped edge strip of the floor. This is a regular connection, and the effect is not bad.

The living room chooses floor tiles, and the bedroom is paved with wooden floors, which is also a common practice, and the connection between them is generally treated with metal buckles, stone of different colors, and Terrence tiles to connect!

Closures can be used to connect tiles to the floor.