1 82 cm cabinet door to add a straightener

This meter of cabinet door needs a straightener, and this cabinet door is better fixed a little bit, so that he does not have some loose or shaky feeling. , especially for the less subordinate boards, definitely want to add a straightener.

A straightener is required for 2 meter cabinet doors, and generally speaking, a straightener is required when the door is higher than 1.6 meters. Including 1.6 meters.

1. Advantages of using straighteners:

A straightener is required for 2 meter cabinet doors, and generally speaking, a straightener is required when the door is higher than 1.6 meters. Including 1.6 meters. The straightener is composed of a segmented metal pass and a plastic connector, and the straightener is glued to the opening of the door panel to fix the door panel, so that the door panel will not be easily deformed.

If you don't add a straightener, this will make it easy to deform on one side.

2. Adjustment of the door panel straightener:

The adjustment of the door panel straightener is actually the adjustment of the spring force. In addition to the common three-dimensional adjustment, some hinges can also adjust the opening force of the door, generally based on the maximum force required by the tall and heavy door, when applied to narrow doors and glass doors, it is necessary to adjust the spring force, and rotate a circle of hinges to adjust its tensile force. The straightener prevents the door from deforming and also corrects the door that has already been deformed.

It can only be used on flat doors, not on modeling doors.

In principle, this question depends on the quality of the plate, and the most authoritative information should be asked to the plate manufacturer you use. Generally speaking, more than two meters should be straightened. Cabinet doors can normally be straightened.

Custom-made wardrobe doors that are more than meters tall need to be fitted with a straightener to prevent the door from deforming. If you choose a solid wood door, you don't need to install a straightener regardless of the height of the door, because the height of the solid wood door is less than 2.5 meters. The solid wood cabinet door can be up to 1.8 meters, and there is no need to install a straightener, and the merchant does not dare to make it too high, for fear that the cabinet door will be deformed.

Most of the custom-made wardrobes will use particle boards.

As a cabinet door, the particle board has better stability. <>

As long as the door is more than a meter, then a straightener needs to be installed. Don't choose to be uneasy in order to save money, after a long time, you will find that the door panel will be deformed, and it will be particularly troublesome to rectify it when the time comes. Whether the cabinet door should be straightened, but also according to the shape of the cabinet door, if the surface of the cabinet door has a concave and convex feeling, then the straightener can be uneasy.

There is no need to consider the height and material of the door, because the concave and convex shape indicates that the thickness of the door is not enough, and there is no way to install a straightener. <>

The straightener can prevent the door from deforming, but many people will not install it for customers if they don't communicate with the merchant when customizing the wardrobe. Because straighteners are not cheap, merchants cut corners in order to save costs. The function of the straightener is to straighten the door panel, prevent the door from being deformed, and can also correct the deformed door panel.

The straightener is slotted in the middle of the back of the wardrobe door, and then the straightener is embedded in the door to prevent deformation. <>

Generally, as long as the door panel exceeds the meter, a straightener is required. Because the longer the door panel, the greater the chance of deformation, and it is necessary to use a straightener to prevent deformation. When the current owners are decorating, most of them will look at the appearance, do not like the traditional wardrobe doors, and like the door-to-top cabinet doors, which is more atmospheric and beautiful.

Choose a door to the top of the cabinet door to install a straightener, which will increase the cost, if you want such a door, be sure to negotiate with the merchant in advance.

1.Solid wood cabinet doors, no matter what the height is, do not install straighteners, because the height of this kind of cabinet door can not be meters, and merchants can do it at most, because merchants are also afraid of deformation. 2.

If the height of the cabinet door exceeds meters, its material is particle board, MDF, multi-layer board, and it is a modern flat cabinet door, then it is necessary to install a straightener.

Depending on the plate material and thickness used for the cabinet door, the thinner the plate, the more likely it is to deform the door panel, and the higher the necessity of installing a straightener. Generally speaking, conventional MDF and synthetic board are used for cabinet doors, and it is best to use straighteners when exceeding meters. If solid wood is used for the door, or other materials such as fiberglass, glass, plastic, acrylic, etc., the straightener usually does not need to be installed.

If the custom wardrobe is more than two meters five, try to install a straightener, which can better protect the wardrobe and prolong the service life.

How high the door needs to be fitted with a straightener: more than meters. Generally, there is no need to install a straightener for cabinets with a height of no more than a meter of holes, but if the cabinet door of an ordinary plate exceeds a meter, it is best to install an upper pull core straightener, which can reduce the probability of deformation of the door cabinet to a certain extent.

The straightener is generally composed of segmented metal passes and plastic connectors, the door panel area is relatively large and the stress point is on one side, which is easy to deform and move, and the straightener is glued to the opening position of the door panel, which is used to fix the door panel to make it not easy to deform and change the vibrillation position as a whole.

In such a case, a straightener should be installed, because if the wardrobe door is equipped with a garbage dish, it can effectively prevent it from deforming, thereby effectively increasing its service life.

Customize the wardrobe, if the door height is relatively high, try to choose to install a straightener, which can improve the service life of the wardrobe. It can be determined according to your actual situation.

It is necessary to install a straightener on the door of the wardrobe, because the life of the door is extended after the straightener is installed, and the cost of the straightener is not high, so it is relatively easy to install this.

Dear, hello, I'm glad to answer for you, does the cabinet door have to be straightened? A: In fact, not all cabinet doors need to be installed with straighteners, but if the doors are higher, they need to be installed (except for log doors) straighteners.

If the cabinet door is made of particle board, multi-layer board, MDF and other artificial boards, and the height exceeds the best according to the straightener, although it can not completely prevent the deformation of the cabinet, but it can still slow down the deformation of the cabinet door to a certain extent and increase the service life.

Summary. Some high-quality plates do not need a straightener, such as double-sided PET+Osson board substrate. According to the physical properties and the tension of the surface PET, a very stable balance can be achieved, so it can be said that it can be said that it can not be added But the vast majority of high-end panels.

The veneer is single-sided, and the back is decorated with the same color surface, so you need a straightener.

The force of the straightener is actually very small The biggest role is the hardness of the straightener material, the owners who don't like the straightener can consider installing a minimalist edge banding handle, which is both beautiful and saves the money of the straightener, and the straightener should also pay attention to avoiding pits.

Centimeter thickness of the Ozon panel cabinet door plus straightener.

Hello dear. Your question has been seen and the answer is being compiled for you, please wait!

Some high-quality plate punch materials do not need to add straighteners, such as double-sided PET + Ozone plate substrate. According to the physical properties and the tension of the surface PET, the root potato can achieve a very stable balance, so it can be said that it can not be added But the vast majority of high-end panels. The veneer is single-sided, and the back is decorated with the same color surface, so you need a straightener.

The force of the straightener is actually very small The biggest role is the hardness of the straightener material, the owners who do not like the straightener can consider installing a minimalist edge banding handle, which is both beautiful and saves the money of the straightener, and the straightener is also scattered to pay attention to avoiding pits.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

The adjustment steps are as follows:

1. Remove the broken hardware first, and it is recommended to remove the hardware hinge screws of the cabinet first, and then remove the hardware hinge screws on the door panel.

2. Assemble the hinge, choose imported hardware for more durable assembly of hardware hinge, as long as the buckle can be.

3. Use common convenient chopsticks, smear white latex and insert them into the hole to fill them, and then cut the bamboo chopsticks with a blade to ensure that they are cut flush with the counter surface and are smooth and beautiful.

4. Before fixing, the new hinge is first placed in the cabinet and the door panel to determine the position, and then drilling, and the door piece and the cabinet should be aligned up and down.

5. Before fixing the hinge and locking it firmly, use a ruler or wooden strip to adjust the hinge to a vertical angle, so that the lock will not be crooked, causing the door piece to tilt.