Is there a 09 Focus that burns engine oil?

Updated on Car 2024-03-30
9 answers
  1. Anonymous users2024-02-07

    Most of the Ford Focus oil burning is caused by the piston rings being trapped by carbon deposits. Relying on the addition of high-viscosity engine oil to continue life is only an expedient measure to cure the change. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in the combustion and forms more carbon deposits, which in turn aggravate the degree of oil burning and form a vicious circle.

    Too much carbon deposits will clog the fuel injector, resulting in poor atomization and poor combustion. In the long run, it will cause cylinder wall strain, or even cylinder burst, and finally the engine can only be disassembled for overhaul.

    The solution to burning the oil.

    In the habitual thinking of car enthusiasts, they always think that burning engine oil should be overhauled, so that they not only have to bear high maintenance costs, but also bear the unpredictable risks and depreciation losses brought about by the overhaul. Destroy the airtightness and precision of the engine. And there is a possibility that the engine oil will burn again after tens of thousands of kilometers, so overhauling the engine is not sustainable.

    Now the no-dismantling technology has been very mature and gradually accepted by the majority of car owners. In particular, the non-destructive repair products containing PNF patented technology have completely gotten rid of the technical shackles of the operation of the auto repair shop, and the owner can operate it himself without removing a screw, and the piston ring is repaired and released during driving, and the effect is remarkable.

  2. Anonymous users2024-02-06

    The Focus car has not heard of burning engine oil, and the quality of the classic Focus of the 09 model is very good, but the fuel consumption is high.

  3. Anonymous users2024-02-05

    There are not too many cases of burning engine oil in this car of Focus, but there are still more oil leaks in the gearbox, and there are many owners who give feedback.

  4. Anonymous users2024-02-04

    Hello, the Focus engine does not burn much oil, generally on time normal maintenance, the engine is generally not damaged, it is recommended to maintain the engine on time every 5000 kilometers, I hope it will help you.

  5. Anonymous users2024-02-03

    **The phenomenon of Fox burning engine oil has not been heard of, but if the old model burns engine oil, it may be that the engine is more seriously worn.

  6. Anonymous users2024-02-02

    Hello, the response rate of this car you said about burning engine oil is not so high, but the oil leakage is relatively high.

  7. Anonymous users2024-02-01

    Hello! In 2009, the Ford Focus car burned engine oil may be due to serious engine wear, and you can go to the repair shop to take a look.

  8. Anonymous users2024-01-31

    The reason for the sudden increase in fuel consumption of a car is tire pressure.

    Too low, air cleaner.

    Clogging, engine carbon build-up, spark plugs.

    Aging. The details are as follows:

    1. The tire pressure is too low.

    The tire pressure is too low, just like a bicycle can't pedal when it's out of air, and so is a car. This will not only lead to an increase in fuel consumption, but also have many safety risks, especially when running at high speeds, tire pressure is too low and it is easy to get a puncture.

    2. The air filter element is blocked.

    If the air filter is not cleaned for a long time, it will produce dust, resulting in insufficient air intake and insufficient fuel intake, which will lead to increased fuel consumption and in severe cases, it will also affect the life of the engine.

    3. Engine carbon deposits.

    After the car has been driven for a long time, the engine will more or less produce some carbon deposits, especially in some road sections that are often congested, and frequent low-speed driving can easily lead to too much carbon deposits in the engine. Excessive carbon build-up in the engine can lead to a lack of engine power and increased fuel consumption.

    4. Spark plug aging.

    The aging of the spark plug leads to the weakening of the ignition and the lack of power, and when driving, in order to provide enough power to the car, then the car must provide more raw materials, resulting in an increase in fuel consumption.

    5. Oxygen sensor failure.

    If the oxygen sensor is damaged, it will lead to inaccurate engine computer data and increase fuel consumption, and in severe cases, black smoke will be emitted.

    Precautions: 1. Changing driving habits and sudden acceleration and braking will waste a lot of fuel consumption, so avoid rapid acceleration or sudden braking.

    1. If you encounter a sudden increase in fuel consumption, you can start from the driving habits, road conditions, tire pressure, etc., if you confirm that these external reasons are ruled out, then you should suspect whether the car itself is faulty, then it is best to go to the 4S shop or maintenance shop for maintenance.

  9. Anonymous users2024-01-30

    Summary. Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

    07 Fox burns engine oil.

    Hello, don't click to end, I'm textual to give you the full answer, 2-3 minutes.

    Hello, I am your exclusive technician, attentive, careful, dedicated to answering your car questions, for you to find the corresponding problem solutions and solutions! The relevant scheme is as follows: This Focus must be overhauled to solve the problem of burning oil is due to the piston ring and valve oil seal caused by the cost of burning oil about 3600 in different regions, **There will be differences, you can also consult your local car repair shop for details, I hope I can help you!

    It's not ordinary, it's burning badly.

    Basically, the oil burning caused by the piston ring has to be overhauled to completely solve.

    Does the old Focus generally burn oil?

    Yes, when the car gets old, it burns engine oil, and not only the Focus, but also the very durable Toyota series.

    There is no smoke coming out of the exhaust pipe of the car

    If it gets to the smoke, it's even more serious.

    Would it be useful if the valve oil seal was changed?

    A single valve oil seal can improve a bit, but the piston rings still burn the oil.

    How much does it cost to have a piston ring?

    The overall cost is about 3600, including manual materials, some seals, cleaning accessories and so on.

    How much does a valve oil seal cost.

    If you just replace the valve seal, it will be about 1200 yuan.

    If I can help you, please give me a thumbs up Thank you!

Related questions
11 answers2024-03-30

Hello car owner, the new car should not burn, there is a problem can also claim, I wish the car a happy [car problems, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

6 answers2024-03-30

The main reason for burning engine oil is two aspects, one is the problem of accessories, valve cover, cylinder pulling, and insufficient cylinder pressure. The second is that the oil circuit is not cleaned for a long time, the antifreeze is not replaced in time, the oil service life is too long, and the piston ring is stuck, and the more common situation is that the piston ring is stuck. >>>More

25 answers2024-03-30

Hello landlord, I guess it's burning engine oil, I suggest that the landlord change a little bit of fully synthetic engine oil, now it has been changing the German GT engine oil, the first time I changed it gently and stepped on the accelerator, and the power rushed up. >>>More

5 answers2024-03-30

First of all, let's take a look at the engine structure of German cars, the engine cylinder wall of German cars basically adopts a similar reticulated structure (oil storage structure), the oil storage structure of the engine cylinder wall is obtained through surface treatment, there are many structural forms: straight grain, cracked reticulum, grid reticulation, pits, etc., the German engine cylinder wall is mainly a mesh structure obtained by pine hole chrome plating surface treatment and honing. >>>More

12 answers2024-03-30

Comparatively speaking, the more reliable brand is SIAU Shihang Mini. >>>More