A1278 How to install W7 system introduction

Sorry, not very familiar with the Apple system!

The installation steps are as follows:

2. Partition, you can divide it into a part of the disk of the Mac system, use the disk utility that comes with the system, at least 30G out, and divide it into ms-dos (fat) format.

3. Prepare an 8G or above USB disk, insert it into Mac5 after formatting, restart the computer after the production is completed, hold down the option, enter the boot hard disk selection, select the Win7 icon of the USB disk to start, and then the steps are the same as installing Win, go in and then format the disk that has just been formatted into NTFS.

6. Then every time you restart, you have to hold down the option to enter Win.

7、After installation, enter win7,Open the USB disk,There's a win driver in it,I forgot what it's called.,And then go in and install all the drivers are installed.。

8. Activate win7

Reset the boot area first, fdisk mbr or other disk utility.

Then set up the active disk.

Let's do all of the above with WindowsPE. It's relatively simple.

Then you can install the system like any other computer.

Windows7 comes with a complete set of drivers, and generally there is no need to install another driver.

Apple computers do not have a good energy-saving effect under the Windows system, so you must be mentally prepared.

How to install win7 system with USB flash drive on Apple computer:

1.Use the U Master USB flash drive boot disk maker to make a USB flash drive into a boot USB flash drive;

2.Plug the USB flash drive into the computer, restart the computer, because the Apple notebook does not have BIOS settings, if you want to use the USB flash drive to boot, you usually insert the USB flash drive, press and hold the "optin key" when the computer starts, and it will enter a boot boot options interface;

3.Use the arrow keys to select "USB flash drive start" on the right, and press the enter key to enter;

4.Plug the USB flash drive into the computer, start the computer from the USB flash drive, enter the USB flash drive menu selection interface, you can choose the corresponding option according to your needs, choose here;

5.After entering the PE, double-click the desktop "Partition Tool DiskGenius" icon, and an interface will pop up (we will delete all partitions next, so be sure to back up the data before that);

6.In the pop-up window, you will find that the "Delete Partition" icon in the toolbar is gray, then select a hard disk partition first, and then you will see the "Delete Partition" icon brightened and click on it; Follow this method to delete all partitions in turn, as shown in the figure, you will find that the "delete icon" will be grayed out again;

9.Then click "Quick Partition" in the toolbar of the interface to pop up the Quick Partition window, in the window we can set the number of partitions and the size of the partition, after these settings, click the "OK" button below;

14.After the ghost system is installed, a "Restore Successful" window will pop up prompting that the computer will automatically restart after 15 seconds.

15.Wait for the computer to reboot before completing the subsequent system installation.

It's necessary to install a mac first to have win7.。。。 Boot option toggle it.

There are three ways to restore the system. 1.The phone recovers itself.

Open Design, Settings, General, Restore, select Erase All Content and Settings, wait a few minutes, and your phone will be restored automatically.

2.Recover via iTunes.

**After installing the iOS package, open iTunes, after the phone icon appears, press and hold shift+restore at the same time, and then select your Ann Loose Pack, and it will be good in a while.

Hope mine can help you.

Win7 direct installation,OSX requires a series of operations,It is estimated that you will not,You can do it yourself,I can't finish it here!!

I don't know how you got it when you installed the w7.

You can boot the computer first and press and hold Option to see if there is still an OXS system left, if not, you can also boot it when there is a network, and press and hold Command+Option+R

You can restore the original settings remotely, but the hard disk may be gone, use it with caution.

Who said,It's you yourself won't use it.,I just bought it before, and you had a problem like this.,Later, I called** to customer service to solve it.,It's really ** connection b to help restore the system.,I also made the same mistake as you.,But you can install a dual system d.,It's very easy to use.。