What problems do I need to pay attention to when buying an ice machine?

Air cooling and water cooling are specific to piston compressors. The compressor needs to generate a lot of heat in the process of compressing the gas, so it needs to dissipate heat; The method of using a fan to generate air flow and force blowing to the cylinder to take away the heat is called air cooling; Like a car engine, the cylinder is made into a double layer, and the heat is taken away by circulating water in the middle, and this cooling is called water cooling. The air-cooled ice machine has high space requirements, and the ambient temperature is not lower than 2 and not higher than 32; Appropriate spacing (greater than 20cm) should be kept around the perimeter to maximize the efficiency of ice making.

Then, according to your own needs, choose what kind of ice to produce?

In hotels, KTVs, fast food restaurants and other places, the amount of square ice used is relatively large; In addition, there is a kind of semi-square ice, because the melting rate of semi-square ice is relatively fast, so half ice is widely used in cafes and McDonald's; When three or five friends get together to drink some red wine or drinks, you can choose 28*28*25 (mm) Dafang Ice; In addition to large square ice, there is also a kind of round ice suitable for high-end clubs. Round ice melts slowly, making it ideal for red and foreign wines, as the ice cubes are pure, transparent, hard, and will not be ice-free; Snowflake ice is widely used in Japanese cuisine, hotels and other places; In addition, there are scale ice used on seafood workbenches in supermarkets and moon-shaped ice used in bakeries.

Finally, choose the right ice machine according to your own demand for ice.

Ice machine is to have a good compressor, it is best to buy an ice machine with an imported compressor, the compressor is not good, you can't make ice, a good ice machine, you can get ice at any time. Also, if you want fine ice or larger ice, you also have to ask clearly!

The core of the ice machine is the compressor, but now almost all manufacturers say that their ice machine compressor is imported, but no one knows whether this is the case. It is recommended that you go to a nearby bubble tea shop or drink shop to find out, or choose a sign to ring a little.

Buying an ice machine is mainly the core component of the ice machine - the compressor. There is also the overall use of the comprehensive ability of the machine. I recommend you to use the Vismei Ice Machine. The most important thing is that the after-sales service should be ***.

Although ice machines are more common in life, who will know more about its use and operation? How to use an ice machine? PChouse will take you to find out.

1. Before use, check whether the devices of the ice machine are normal, such as whether the water supply device is normal and whether the water tank storage is normal.

2. After confirming that all items of the ice machine are normal, place the ice machine in a stable place, and insert the prepared bottled water into the water inlet of the ice machine. At this point, the water automatically enters the tank of the ice machine.

3. After plugging in the power supply of the ice machine, the ice machine will start working, the water pump will start to run and pump the water in the water tank into the ice making area, at the beginning, the water pump has a process of air discharge, and after the air is discharged, the compressor will start and enter the working state, and the ice machine will start to enter the ice making state.

4. When the thickness of the ice cubes in the ice maker reaches the thickness set by the ice machine, the ice plate probe in the ice maker will start to work, and the defrost solenoid valve will work at the same time, while the water pump will stop working, the breather valve will open the hot gas into the evaporator, and the ice cubes will start to fall.

5. When the ice in the ice storage bucket of the ice machine is full, the reed switch will not close automatically, the ice machine will automatically stop working, and the ice making will be completed.

Used for: hotels, bars, KTV, milk tea shops, KFC, supermarkets, etc. to make ice cubes, can be made into cube block ice, snowflake ice, flake ice, etc., uses: put in wine, beverages, milk tea, ice seafood, etc.

There are many uses, such as general supermarkets for fresh preservation, hotels, bars, KTV, bubble tea shops, KFC, fishing boats, food processing plants, etc.

Ice machines are used in a wide range of applications, such as supermarkets, bubble tea shops, beverage shops, liquor stores, and so on. Ice machines produce ice cubes very quickly, and many users will buy ice machines to replace refrigerators, but many users don't know how to use ice machines after buying them. The following is a brief description of the points to be paid attention to when using an ice machine, I hope it can be helpful to you.

1. Read the manual.

First of all, it is necessary to read the corresponding manual, and secondly, find the various parts on the ice machine, such as the water filling area, the power supply area, the control panel area, etc., and understand the functions of each part. After a simple observation or review of the instructions, and the correct connection to the water source, we can start making ice cubes.

2. Pay attention to the environment.

The ice machine needs to be placed on a solid and flat ground so that the ice machine is kept level, otherwise there will be noise and no de-icing when making ice. Like other refrigerated display cabinets, there should be no heat source around the ice machine, a good ventilation environment, and the surrounding temperature should not exceed 30 degrees, so as not to cause poor heat dissipation of the condenser due to excessive temperature and affect the effect of ice making in the car.

3. Guarantee of power supply and water quality.

The raw water for ice making should meet the national drinking water standards, and a filter device should be installed to avoid blockage, which will affect the ice-making performance of the ice machine. The power supply that should be used in the refrigerator needs to have a fuse and leakage protection switch, which is similar to a refrigerated display case, and it also needs to be grounded.

Fourth, clean regularly.

Ice machines need to be cleaned regularly, including inlet valves, filters, water pipes, sinks and condensers, etc., to prevent clogging and affecting the ice making effect. The ice maker should be cleaned when not in use, and it should be kept free of moisture inside, and then placed in a ventilated and dry place. When cleaning the condenser, avoid using sharps to prevent damage to the condenser.

1. The ice machine is not well iced.

Check whether the flow is even, and check whether the top flow hole is blocked. Qingyou sprays to check whether the nozzle is blocked, whether there is limescale, and clean it.

2. No running water when making ice.

You should check the circulating water pump to see if it is working normally, if it is not broken, that is, the water level probe may be short circuited, the water level control head can judge whether there is water, it is through some signals to judge whether the required water is reached.

3. Short dehydration time.

The short dehydration time of the ice machine may be: the ice plate probe is wrong; Deviation of the water level probe: water source temperature; Water inlet solenoid valve:

Hydraulic. The solution is to adjust the thickness of the ice plate control needle to the thickness that should be adjusted; Check whether the water level and the position of the water level probe are appropriate; The temperature of the water source should not be higher than 32°C: see if the water inlet valve is normal; The water pressure must be 20-80 psi.

4. The refrigeration effect is not good.

Insufficient exhaust gas, compressor breakdown, may be the reason for the poor refrigeration effect, capillary problems will cause scaling, clogging the system resulting in no freezing. The high pressure is not hot, go and see the bulging valve. Mainly check the pumping system first.

The water supply flow of the pump is too large to intercept the flow. Reduce the water output, the water can flow full of ice mold, the ice machine can make the cooling effect is not good, and the water on the ice plate will become a smoothie, that is, the ice plate will not freeze, and the copper pipe on the radiator will not be hot.

The ice machine uses a refrigeration system to make ice freezing equipment after passing a certain equipment with a water carrier in an energized state, which has certain applications in many fields. The following is a list of things to pay attention to when using an ice machine, welcome to refer to it

1. The ice machine should not be placed in the open air, it is best to install it in a safe, clean and well-ventilated environment, and should not be exposed to direct sunlight and rain.

2. The ice machine should not be close to the heat source, and the use environment should not be lower than 5 and not higher than 40, so as not to affect the heat dissipation of the condenser and achieve a good ice-making effect.

3. The ice machine should be installed on a stable platform and adjusted to the bottom of the machine'Anchor screws to ensure that the machine is placed horizontally, otherwise it will not de-ice and cause noise during operation. There should be space around it, and in order to facilitate heat dissipation, the space on the left, right and back of the machine should not be less than 150mm.

4. The ice machine should use an independent power supply that meets the national standards, and the power supply should ensure reliable grounding, and be equipped with fuses and leakage protection switches, etc., and the voltage fluctuation shall not exceed 10% of the rated voltage.

5. The ice machine should use a water source that meets the local drinking water standards, and install filters to remove impurities in the water, avoid clogging the water pipe, polluting the water tank and ice mold, and affecting the ice-making performance. The lowest temperature of the water beam is 2, the highest is not more than 35, and the water pressure is the lowest and highest.

6. The ice machine must unscrew the head of the water inlet hose for two months, clean the water inlet valve filter, and avoid the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller, resulting in no ice. Although the ice machine will drain the cooled residual water in the sink at the end of each ice-making process to achieve the cleaning effect, which can effectively reduce the scale generated in the evaporator and water circulation slag system, but generally about six months, the ice machine cleaning agent and disinfectant should be used to clean and disinfect the water distribution pipe, sink, refrigerator and water baffle, and rinse clean, and the ice cubes generated during the cleaning process are inedible. When not in use for a long time, it should be cleaned, and the ice mold and the moisture in the box should be dried by using a hair dryer, and placed in a non-corrosive gas, ventilated and dry place, and avoid open storage.

7. When handling the ice machine, it should be handled carefully to prevent violent vibration, and the handling slope should not be less than 45 degrees, after long-distance transportation, the ice machine should be placed for 2-6 hours before the ice can be opened.