How DJI Phantom 4 is controlled with a computer

The DJI Phantom 4 cannot be controlled with a computer at the moment, and can only be controlled with a mobile phone or tablet.

The DJI GO app requires iOS or higher and Android or higher. Hantom 3 is perfectly compatible with the DJI Go app for iOS and Android, and the DJI GO app is also compatible with Inspire 1.

iOS: iPhone 5s, iPhone 6, iPhone 6 Plus, iPad Air, iPad Air Wi-Fi + Cellular, iPad Mini 2, iPad Mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad Mini 3, and iPad Mini 3 Wi-Fi + Cellular. The app is optimized for iPhone 5S, iPhone 6, and iPhone 6 Plus.

android: samsung s5、 note 3、 sony xperia z3 、 google nexus 7 ii、 google nexus 9、 mi 3、 nubia z7 mini

The list of supported devices is constantly updated and added.

No way to control it by computer. Can only be upgraded or tablet.

Summary. 1. Connect the remote control to the host's wifi, the host's wifi name is the fuselage serial number, and the connection method is the same as that of the Android phone.

2. Turn on the drone and connect it to the remote controller, please refer to the DJI drone and remote controller connection instructions for specific connection methods and troubleshooting.

3. Click Flight on the main page, the remote controller will have a prompt that the network is not connected, click Ignore this time to enter the flight control interface.

4. Click on the upper right corner....Settings, open the settings menu, and go to RTK settings:

5. Please judge by yourself that the rest of the aircraft settings are set according to the project requirements or the default settings of the drone. Once set up, the flight plan can be called up for execution.

How to connect the DJI Drone Phantom 4rtk to the remote control.

1. Connect the remote control to the host's wifi, the host's wifi name is the fuselage serial number, and the connection method is the same as that of the Android phone. 2. Turn on the drone and connect it to the remote controller, please refer to the DJI drone and remote controller connection instructions for specific connection methods and troubleshooting. 3. Click Flight on the main page, the remote controller will have a prompt that the network is not connected, click Ignore this time to enter the flight control interface.

4. Click on the upper right corner....Settings, open the settings menu, and enter the RTK settings: 5. The rest of the aircraft settings are according to the project requirements or use the default settings of the drone, please judge by yourself. Once set up, the flight plan can be called up for execution.

Have a great day.

Play it. That's the solution.

It's more intuitive.

The DJI Phantom 4 remote control was unsuccessful in binding, why.

Try re-linking The following steps are linked: 1) When leaving the factory, the remote controller and the aircraft have completed the linking, and they can be used after powering on. If you replace the remote control, you need to re-link it before you can use it.

Follow the steps below to link the link: 2) Turn on the remote control and connect the mobile device. Then turn on the Intelligent Flight Battery, run DJI GO, select the "Camera" interface, touch the remote controller icon, and then tap the "Remote Controller Linking" button.

4) The DJI Go app displays a countdown dialog box, and the remote control status indicator flashes blue, and a "Didi Xinliang file" prompt sound is sounded. 5) Press the linking button with the appropriate tool and release it to complete the binding. After the linking is successful, the indicator light of the remote control shows that the green light is solid.

The linking button and the linking indicator are located on the side of the aircraft.

Mobile software.

If you encounter this situation, please allow the DJI app to be installed in the settings of your mobile device.

After the aircraft is connected to DJI GO, enter the [Camera Interface], divide the [Camera Interface] into the following red box areas, and I will combine each part with you**.

Click the logo to enter [Flight Control Parameter Settings].

Starter mode. What happens when Starter Mode is turned on?

1. [Height limit] and [distance limit] 30m, when the plane reaches the height limit and distance limit, it is like a wall of air and cannot be crossed.

2. If the satellite signal is not good (such as indoors), after the novice receives the aircraft, he can [turn off] the novice mode and check whether the motor can be started.

Remember: If [Newbie] wants to actually fly, you still have to [Enable] Novice Mode!

How does Starter Mode look like on the map?

Exit [Flight Control Parameter Setting] - click [Map] in the lower left corner, you can see that there is a circular area limit with a radius of 30m centered on the take-off point.

Height and distance limit settings

Turn off the novice mode and turn on the height limit and distance limit. Note: After entering the value, be sure to click done.

How is the map displayed after the limit is adjusted to 500m? See the diagram below.

Manipulating feel settings

What is the exp value of the manipulation feel?

The EXP value reflects the logical relationship between your physical rod size and the actual rod amount received by the aircraft, and the x-axis is your batting amount, in the case of the same batting amount, the EXP value is different, and the output of the Y-axis reaction is also different;

Colloquial analysis: In layman's terms, the x-axis is how much we push the joystick, and the y-axis is the amount of rod we actually receive. As an analogy, if I have 50 yuan, I can buy something for 50 yuan, but after adjusting the exp value, I have 50 yuan, and I may buy something for 70 yuan, or I may only buy something for 30 yuan.

Function explanation: If I hit 50% of the throttle stick (American hand), the following figure reflects the x-axis of the function curve.

As we can see from the graph below, when the x-axis is 50% and the exp value input is different, the y-axis (i.e., the actual number of rods received by the aircraft) is completely different'。

With the same stick input, the larger the exp value, the greater the amount of lever the aircraft actually receives. Beginners can lower the value or set it to the default value. Of course, if you are interested, you can adjust to the maximum and try it yourself, and your own feeling is more intuitive than what others say.

But, remember to stay safe! Stay safe! Stay safe!

Important things to say three times!

Sensitivity settings

Attitude sensitivity: Adjust the response speed of each attitude of the aircraft.

Brake sensitivity: Everyone imagines an airplane as a car, and braking sensitivity is the speed of braking.

Yaw stroke sensitivity: The actual feedback effect is the speed of the aircraft's rotation (you can feel the effect of different yaw stroke sensitivity on the computer at the same time** below two**).