Seek the automatic door industry system, automatic door industry standards

The relevant documents have been sent to your mailbox, please remember to check! We hope you find the information provided!

The information has been sent to your mailbox, please check!

Automatic Door Industry Acceptance Standards.

1. Theme content and scope of application:

This standard Li Luzhun stipulates the product classification, technical requirements, test methods, inspection rules and signs, packaging, transportation and storage of sliding automatic doors.

2. Material: The door body material is made of aluminum alloy building profile, and other materials can also be used.

The aluminum alloy building profiles for doors shall comply with the provisions of GB 5237, and other materials and accessories shall comply with the current national standards and industry standards.

In addition to stainless steel or corrosion-resistant materials, the door and the selected parts and accessories should be treated with anti-rust and anti-corrosion, and contact corrosion with aluminum alloy profiles is not allowed.

3. Assembly requirements:

The connection of the door components should be firm, and the structure should have sufficient strength and rigidity to withstand the installation of parts and components such as driving and control and ensure that the door can be opened and closed freely.

The levelness of the door beam guide rail is not more than 1mm per meter length.

The verticality of the door frame is not more than 1 mm per meter length.

The vertical plane where the lower guide rail and the door beam guide rail are located should be parallel, and its parallelism should not be greater than 1mm per meter length.

The door frame and sash should be evenly matched, and when fully closed, the limit deviation of the vertical edge gap between the moving fan and the frame or with the fixed fan should not be greater than , and the gap limit deviation between the fan and the fan should not be greater than .

During operation, the moving fan shall not be scraped or rubbed with the door beam cover, fixed fan and ground.

The installation of zero and accessories for the door should be in the correct position, complete and firm, play their respective roles, have sufficient strength, and open and close flexibly.

4. Surface quality:

There should be no obvious damage and defects that affect the performance of the door decoration surface, and the local scratches and scratches of each door should meet the corresponding standards or relevant standards.

5. The performance of the door:

The power supply voltage is AC220V 10 and the frequency is 50Hz.

Ultrasonic, infrared, and microwave detection ranges should be adjustable.

Shenzhen Xililai automatic door ****.

There should be 2 of them.

JG T 177-2005 Beijing Naqiru Boke Automatic Door Gao Qingqi.

JG T 257-2009 Ningbo Onic Automatic Door Hu.

There is no provision in the relevant laws and regulations that 'automatic doors must be opened automatically in the event of a fire'.

But it can be presumed.

The national standard for "Sensors for Automatic Doors" is being formulated.

The bus is pneumatic folded to stack the door source, the driver presses the switch, the solenoid valve is energized, the gas circuit is connected, the door pump is intake and exhaust, the door is opened and closed, and some can be controlled by remote control solenoid valve to power off and control the door to open and close the door.

Electric doors and windows are a DC motor forward and reverse DC motor, change the direction of the current is to change the positive and negative poles, to achieve forward transmission and reversal, now there are two kinds of control, the first one is to change the direction of the current through the switch contact, this is the earliest outside modification of electric doors and windows is also used in this.

The second is that the ECU door and window light is sent to the computer as an electrical signal, and the computer judges the driver's intention through the signal and then activates the transistor to control the direction of the current, so as to realize the automation of the door and window.

The bus copy is generally a pneumatic folding door, the driver presses the switch, the electromagnetic bai valve is energized, and the gas path is connected.

du, the door pump intake zho exhaust, the door will open and close, some dao can use the remote control to control the solenoid valve to power on and off, and control the door to open and close the door.

Electric doors and windows are a DC motor forward and reverse DC motor, change the direction of the current is to change the positive and negative poles, to achieve forward transmission and reversal, now there are two kinds of control, the first one is to change the direction of the current through the switch contact, this is the earliest outside modification of electric doors and windows is also used in this.

The second is that there is an ECU door and window opening as an electrical signal to the computer, and the computer judges the driver's intention through the signal, and then activates the transistor to control the direction of the current, so as to realize the automatic speech of the door and window.

The buses are all pneumatic folding doors for the driver.

DU press the switch, the solenoid valve is energized, and the gas path.

DAO is connected, the door pump intakes and exhausts the version, and the door is opened and closed, and some can be controlled by remote control to control the solenoid valve to power on and off the power to control the door opening and closing.

Electric doors and windows are a DC motor forward and reverse DC motor, change the direction of the current is to change the positive and negative poles, to achieve forward transmission and reversal, now there are two kinds of control, the first one is to change the direction of the current through the switch contact, this is the earliest outside modification of electric doors and windows is also used in this.

The second is that there is an ECU door and window opening as an electrical signal to the computer, and the computer judges the driver's intention through the signal, and then activates the transistor to control the direction of the current, so as to realize the automatic speech of the door and window.

Let's talk about details, what kind of automatic door. What a car.

General access control system configuration: access control host, access control power supply, electric lock, exit button.

Wiring method: 1. The +12V, GND end (power supply of the access control host) on the access control host is connected to the +12V and GND end of the access control power supply.

2. The positive end of the electronically controlled lock is connected to the NO or NC end of the access control power supply (depending on the normally open lock and normally closed lock); It is usually connected to the NC terminal (unlocking when powering on, locking off when powering off). The negative termination of the electronically controlled lock is connected to the GND end of the access control power supply.

3. The push end (open signal) on the access control host is connected to the push end of the access control power supply. The door opening signal mark on the access control host is NO and NC, and it is usually connected to the NO end to the push end of the access control power supply.

4. If the other end is connected to the door button, the two wires of the door button are connected to the door button end of the access control host; Or it is connected to the push end and GND end of the access control power supply.

5. If the other end is connected to the card reader, the card reader is connected to the corresponding signal end of the access control host (generally connected to 4 terminals: 12V, GND, Data0, Data1).

Connection Method:

1. The +12V and GND end on the access control host (power supply of the access control host) are connected to the +12V and GND end of the access control power supply.

2. The positive end of the electronically controlled lock is connected to the NO or NC end of the access control power supply (depending on the normally open lock and normally closed lock); Usually connected to the NC terminal (power on unlocking, power off locking). The negative termination of the electronically controlled lock is connected to the GND end of the access control power supply.

3. The push end (door opening signal) on the access control host is connected to the push end of the access control power supply. (The door opening signal on the access control host is NO, NC, usually connected to the NO end to the PUSH end of the access control power supply).

That is true.

One up, two on two, three down five divided by two, four down five down one, five to five into one! Yes also.

Remember to adopt it.

Directly connected to the controller terminal. On the doorMX automatic door running device, connect 1 (OV), 6 (access control signal input). Generally, the access control card reader uses the 12V power supply provided on the controller, and it is OK.

If the fingerprint access control belt does not move, you can use the external door control power supply to provide weak current, and it is OK.