Is the reversing in the second subject of the test, whether it is left or right, to hit the left tur

Essentials of reversing warehousing operation:

1. Pour into the garage from the starting point.

1. After the driver gets into the car, adjust the seat and rearview mirror, and fasten the seat belt, and then hang the car in reverse gear, release the parking brake lever, the car starts and reverses at idle speed, and the driver observes the garage through the right rear window.

2. When you see that the black edge of the right rear window is aligned with the right line of the garage, turn the steering wheel to the right at a constant speed to the limit position.

3. After the car is put into storage, the driver looks back at the left side mirror, and when he sees the left side line of the entire garage, he immediately returns to the steering wheel.

4. Stop immediately when you see the left door handle and the bottom line of the garage from the left side mirror.

2. Drive from the garage to the return point.

When the car is driven out of the garage in 1st gear, when you see the hood approaching the roadside, turn the steering wheel to the left and stop straight behind.

No. To exercise over there, just hit the lights over there, this project can also be without lights, but the side parking must be lighted, as for the methods and skills of reversing into the garage, it is recommended that you go to ** network to see the latest edition of the "driving test cheats" 2015 book. 6 methods, one step and one picture, ** cooperation, as well as a variety of common troubleshooting for novices, and a special chapter on how to correct.

In addition, a full set of learning to drive** teaching and simulation software for various subjects, and the author personally answers all kinds of questions. In addition, there are standard ** teaching and simulation software for each subject, and the author personally answers all kinds of difficult questions about learning to drive. According to the method of the book, there is basically no problem in passing the exam and getting the certificate at one time - it is a book, not a fake PDF on the official website.

It's not another driving test book that imitates the book.

1. Play the right light when entering the project, and play the left light when leaving the project, which is the case for any project in the subject 2 venue, regardless of the direction of the car.

2. After the side just starts to hang up the reverse gear, just hit the right light. Then stop in, go out, hang up one gear, and turn on the left light.

3. Reversing and warehousing operation skills:

Control the driving speed and idle in 1st gear or reverse gear throughout the whole process, and drive at what speed you start.

In the process of controlling the timing of steering, we should observe carefully, grasp the key points of steering, and turn in a timely manner.

When controlling the driving route test, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed.

1. Subject 2 reverses into the warehouse first from the right. 2. Subject 2: Reversing and warehousing for correct operation Step 1: After getting into the car, first adjust the front and rear positions of the seats, and adjust the backrest to a comfortable angle to ensure that you can freely rotate the steering wheel and see the hood of the front of the car.

2. Adjust the left and right rearview mirrors, so that the body in the mirror appears in about 1 3 positions in the mirror, and the rear door handle is exposed on the upper edge of the mirror.

3. Hang a gear, with a positive head, and go out of the warehouse in a straight line. When the hood of the front of the car just covers the edge line opposite the garage, hit the steering wheel to the right. When the body is parallel to the left sideline, return to the steering wheel and continue to move forward, with the front of the car crossing the induction line.

At this time, the distance between the body and the left sideline happens to be within the optimal distance, so as to ensure that the back storage will not roll the line.

4. Start reversing slowly, turn your head to the left, observe the position of the induction line outside the left window, and when the intersection of the induction line and the lower edge of the window reaches point A, hit the steering wheel to the right. Keep the steering wheel right to kill, continue to reverse, and at the same time observe the right rearview mirror, the state in the mirror changes like this: you can't see the corner of the library See the corner The distance between the corner and the body gradually decreases, and the corner of the car continues to sink from top to bottom.

5. Continue to reverse, the library angle in the right rearview mirror also continues to sink, and when the library angle just disappears, quickly kill the steering wheel to the right.

<>6. Continue to reverse, and when the body is parallel to the library line, return to the steering wheel. Continue to reverse slowly, quickly turn your head to look at the left rearview mirror, and when the lower edge of the left rearview mirror just covers the left exit line, step on the brakes and stop. Parking at this location can ensure that the distance between the front and back of the car in the garage is just right, and everyone can correct it appropriately, but be sure to remember the corrected observation point.

7. Hang a gear, with a positive head, straight out of the warehouse. When the hood of the front of the car just covers the edge line opposite the garage, hit the steering wheel to the left. Continue to keep the steering wheel left dead, slow down, and always look in the left rearview mirror.

The situation seen in the mirror is: first, I see the left library line, the left library corner, the entire library mouth, and the body is put into storage. At this time, judge whether the body is parallel to the left library line, once parallel, immediately return to the steering wheel and continue to reverse slowly.

8. When the lower edge of the left rearview mirror just covers the left outbound line, step on the brake and stop. Parking in this position ensures that the car is at the right distance between the front and back of the garage to complete the test.

Subject 2: Left reversing into the warehouse highlights the direction is as follows:

1.Observe the left rearview mirror, when the lower edge of the left rearview mirror coincides with the edge of the port port, the steering wheel is killed to the left. Observe the left rear sight mirror, when the rear of the car is 30 cm on the edge of the garage mouth, the steering wheel turns half a circle to the right. Immediately after the body is back to center, the steering wheel is straightened.

2.Hang the reverse gear, lightly lift the clutch and reverse; Observe the left rearview mirror, and when the left starting point sensing line passes slightly past the left rearview mirror, the steering wheel will be killed to the left; Slow reversing while looking at the left and right rearview mirrors to see the distance between the left rear wheel of the car and the left garage corner. If the rear wheel of the car is about 30 cm away from the right corner of the garage, you do not need to correct the direction, continue to reverse the car backwards; If the angle between the wheel and the library is less than 30 cm, you can turn the steering wheel a little back to maintain a distance of about 30 cm;

3.Pay attention to the rearview mirror, and quickly return to the steering wheel when the body is parallel to the Kubian Hubo line; Look in the left mirror and stop when the lower edge of the mirror coincides with the yellow line. When reversing to this angle, the trainee should be able to see the distance between the rear wheel and the garage corner through the rearview mirror.

At this time, the radius of the left side is large, and the wheel is easy to press the right sideline, and the first reaction in this case is to find that the steering wheel is late.

4.Generally, in this case, the steering wheel is returned to the center, and then the car is shunted. But at this time, the right side of the line is imminent, and what should be done should be not to return to the steering wheel, so that the parking space continues to fall backwards to the left.

When the position of the vehicle reaches a slightly inclined angle as shown in the figure below, the steering wheel is quickly corrected, and the body will retreat diagonally according to the current state.

5.When reversing to the situation below, that is, when the distance between the two rear wheels of the car and the sideline is almost equal, immediately fill the steering wheel to the right and let the parking space be thrown to the right. Look in the rearview mirror, and when the body is almost parallel to the garage sideline, quickly return to the steering wheel, and the car can be perfectly reversed into the garage.