How to use Bluetooth headset How to use wireless Bluetooth on mobile phones

The second situation is that there is an A2DP protocol in the mobile phone configuration, but only the mobile phone has this function, and if the headset configuration does not exist, it still cannot be used normally. On the contrary, the connection between the mobile phone and the Bluetooth headset can be completed to hear beautiful songs and hear various audios, and the audio transmission is also very high-quality, and the stereo sound is also very good. How to use Bluetooth headset to achieve the best effect?

The third situation about how to use Bluetooth headset is more comprehensive, the mobile phone is configured with A2DP, our Bluetooth headset is also configured with A2DP, which is now the most basic configuration of Bluetooth headset, so that our mobile phone and Bluetooth can be connected through A2DP, after the test of bus moto, it was found that the mobile phone is configured with A2DP after it can transmit ** audio to the mono Bluetooth headset without A2DP, and the quality is still very good, But the premise is that on Symbian's system, if it is on Android or Blackberry, it will not play such a role.

If your Bluetooth headset is just bought, the general Bluetooth power is relatively low, it is recommended that you start a new charging task after using up the power in the Bluetooth headset, which is good for the Bluetooth lithium battery. After the charging of the Bluetooth headset is completed, turn on the Bluetooth of the mobile phone, turn on the Bluetooth headset at the same time, and use the Bluetooth of the mobile phone to search for the Bluetooth headset.

When the mobile phone Bluetooth finds the Bluetooth headset, a dialog box will pop up, enter the Bluetooth password, generally when buying the Bluetooth headset, the initial password will be written in the manual, after entering it, you will see that the Bluetooth display of the mobile phone is pairing successfully, then you can transfer songs and other files. Among them, the Bluetooth adapter we see is used to transfer files and is limited to the local area network. It supports file transfer between the computer and the Bluetooth headset, which we generally don't need.

How to use the Bluetooth headset is still very powerful.

How to use wireless bluetooth headphones.

1. The first time you use it, try to let the headphones be charged for about 2-4 hours, and then charge them for 2 hours, the instructions also say so, it is best not to exceed 4 hours, some forums say that it must be charged for 24 hours is unfounded, such a small earphone, charged for 24 hours, some are too exaggerated.

2. Tap the Bluetooth settings in the phone settings, select "On", and you're done. This turns on the phone's Bluetooth support.

3. In the Bluetooth headset off state, press and hold the multi-function button MFB of the earphone for more than 3 seconds, and wait for the indicator blue light on the earphone to light up (1, note that it is always on, the pairing process has been always on, not flashing or not flashing 2, and some devices are flashing red and blue alternately), at this time, the Bluetooth headset is already in a state that can be found.

5. Click the Bluetooth headset name item: Motorola HS850, open it, and select Bind. When it's done, the phone is connected to the Bluetooth headset.

Extended information: Tips for choosing Bluetooth headsets.

1. Call quality.

Because call quality is the basic parameter to measure the quality of a Bluetooth headset, in general, the use of pole design of Bluetooth headsets, because the microphone is closer to the mouth, the call quality obtained is relatively better than other types of products.

2. Standby time.

Because this is the same as the daily use of mobile phones, the longer the standby time of the earphones, the more you can avoid the trouble of charging from time to time, which is also one of the standards to measure the performance of Bluetooth headsets.

3. Wearing comfort.

Human ears are relatively delicate, if the earhook material of the earphones is not good, or there are some defects in the design, it will cause discomfort after wearing it for a long time. Therefore, you should carefully check before buying and choose a Bluetooth headset that fits your ear shape.

How to use Bluetooth headphones:

1. Charging. 1. The following Bluetooth headset is introduced here, and when you use it for the first time, you will generally not find the power interface.

2. Use the interface of the charging cable to directly insert it into the edge measuring hole of the Bluetooth headset, as shown in the figure below. The lid at the connector needs to be rotated to open.

3. After plugging in the power supply, if it can be charged normally, the power indicator of the earbuds will display blue. As shown in the figure below.

4. Generally, it can be fully charged in 30-60 minutes, and the remaining power of the earphones will be displayed on the phone after connecting to the phone.

Second, switch on.

1. Press and hold the on/off button on the earbuds for 3 seconds to turn it on. It should be noted that only the function button on the right earphone can be pressed, and the left one has no effect.

2. Shut down. It needs to be turned off when the Bluetooth headset is not in use. Also press and hold the power button for 3 seconds to power off. It should be noted that when you press the hang-up button after answering, you just end the call and do not turn it off.

3. Connect your phone.

Turn on the Bluetooth headset. Turn on Bluetooth on the phone to search for nearby Bluetooth devices, and click to connect after searching for the Bluetooth headset. After the connection is successful, the power indicator of the earbuds will flash down.

Fourth, the use of functions.

Pick up**. 1. Answer and dial **--- dial on the mobile phone, after the mobile phone is connected, the Bluetooth headset will be automatically connected and hear the other party's call. When you need to answer**, press the power button of the earphones directly. When hanging**, press the power button at the same time.

2. Listen**.

3. Adjust the volume.

There is a volume +- button on the side of the right earphone, which can easily adjust the volume.

1. First of all, use the Bluetooth headset to pair with the mobile phone successfully.

2. There are three buttons in the Bluetooth headset, the plus key and the minus key can adjust the volume, press the middle button to answer**, and then press it to hang**.

<>2. To make the Bluetooth headset in the "on" state, you need to press and hold the on/off button of the Bluetooth headset for 3-5 seconds.

3. Until the indicator light blue light and red light flashes alternately and then releases, at this time, the Bluetooth headset and the mobile phone will enter a matching state. Wait for the phone to display "whether to connect to this Bluetooth headset", click "OK to connect" and you can use it.

4. First of all, turn on your Rusanhao Bluetooth headset to ensure that it can be searched by the computer. As shown in the picture, the UFO headset, long press the answer button to turn on the light to turn on, and then turn on the digging and matching will be voice prompts.

5. Open the computer, mine is a win10 system computer, the lower right corner of the computer - Bluetooth icon right click - add Bluetooth device (can also be entered in the control panel or settings).

6. First turn on the Bluetooth switch on your computer, and then click "Add Bluetooth or other devices". Bluetooth belongs to audio devices, choose the first one.

The use of mobile phone Bluetooth is relatively simple,If you have used your own mobile phone and other people's mobile phone Bluetooth transmission of songs,Maybe the use of blue will be more clear,First of all, you need to turn on Bluetooth and blue devices,Then search on the mobile phone,Finally, the two are paired,You can use Bluetooth after successful pairing。 To make sure that the Bluetooth of the mobile phone is turned on, how to use the Bluetooth of the mobile phone? Let's take a look at how to use Bluetooth on your phone.

The steps to use the Bluetooth headset are as follows:

1.First of all, turn on the Bluetooth ear service rotten rolling machine.

To start the Bluetooth headset, first press and hold the Bluetooth headset power button for 5 seconds, then the headset will beep and the red indicator light will start flashing rapidly, which means the Bluetooth headset has been turned on.

To turn off the Bluetooth headphones, you can press and hold the power button again for 5 seconds, the headphones will beep and the red indicator light will flash rapidly until it is off.

2.Start the Bluetooth device in your phone.

After the Bluetooth headset is turned on, you need to turn on the Bluetooth device in the mobile phone again. First enter the mobile phone settings, find the Bluetooth settings, first turn on the Bluetooth on the mobile phone, and then use the Bluetooth device search function in the mobile phone to start searching for nearby Bluetooth devices, and then the mobile phone will search for all Bluetooth devices within a range of about 10 meters around, and display it in the list, and then you can search for Bluetooth headset devices, select connection pairing, and the connection pairing process will ask you to enter the pairing password to create pairing, at this time, enter the pairing code (0000) to create a parallel connection ("pairing") And connect the earphones to the mobile phone, and if the first pairing is good, it will be much more convenient in the later stage. When the Bluetooth headset is successfully paired with the Bluetooth of the mobile phone, you can use the Bluetooth headset to dial or answer**, you can also use the Bluetooth headset to listen**, etc., it is still very convenient to use.

How to use Bluetooth on mobile phones.