How should the leather warehouse be mold proof?

In daily life, leather clothing, leather bags and other leather products moldy environmental conditions are: damp, the presence of animal body dirt and suitable for the growth and development of mold temperature, so the leather clothing in daily life mildew, leather products should be stored in a dry environment, before the collection to be thoroughly cleaned, the most effective method is vacuum isolation preservation, but this method, difficult to implement. The best way to do it, and the easiest and most effective way to do it is:

First, use the leather imitation oil Mepi King or Mejie Wang leather cleaner to clean the leather products thoroughly, and then apply a layer of Mephi King leather antifungal agent, and then put leather clothing, leather bags and other leather products in a dry environment for preservation. Only the outer surface of the leather garment is cleaned, oiled, colored, varnished and maintained, and the inner lining of the leather garment is not within the scope of cleaning. If you need to clean the lining, you can only scrub it as much as possible, but some oil stains and stains cannot be scrubbed off.

Leather clothing is generally washed at a low temperature of 6 -8 by a perchloroethylene dry cleaning machine, and a fur brightener is added when washing, and it is finished after washing. The maintenance of fur clothing, due to the particularity of the structure of the fur plate and fur quilt, should be ventilated and dry, because the fur fur plate and fur quilt are mainly composed of protein. In a damp state, the skin plate is prone to decay, and the hair is easily infested.

Before storing in the box, it should first be sent to a professional laundry for maintenance to remove the oil and dust on the fur clothing, because the dust has a large amount of mold, which is attached to the fur fabric for a long time, which is easy to cause the fur protein to become hard and damaged. When wearing fur clothing, it is necessary to achieve five defenses, namely"Rain, moisture, sun exposure, friction and grease resistance"。

Material warehouses and finished product warehouses should be inspected regularly, and the items placed in the warehouse should not be piled on the ground, and it is best to put them on the material rack for placement, all materials should be kept clean and tidy, and the materials that are not commonly used should be loaded into the PP tape, and should not be leaked in the air, and the dust on the plastic bag should be cleaned regularly to reduce the number of colonies in the storage workshop. Finished products and semi-finished products should not be stacked directly on the floor, they should be separated by pallets, and 10cm away from the wall, and do not rely on the wall of materials or materials, as materials and other materials touching the wall will bring the risk of moisture and mildew. Finished products and semi-finished products should be stacked with at least 2000px wide aisles, maintain air circulation, do not block the aisles or stack finished products and semi-finished products too densely, so as not to affect air convection, cause air whirlwind, and tidal phenomena in some areas.

Finished products and semi-finished products warehouse should be sterilized once a month, combined with the actual situation of your company, first keep the ground clean and hygienic, finished products and semi-finished products warehouse start once a month for the first three months, and once every three months after three months for sterilization, the specific operation is: the day before the holiday, after the worker gets off work, close all doors and windows to make it closed, and then the operator wears a mask and rubber gloves with AEM5700-SPRAY antifungal antibacterial agent evenly sprayed into the air, Especially in corners and some dark and damp places, then after 24 hours of sealing, open the doors and windows to ventilate for 30 minutes, and then enter the warehouse and mop the floor once with AEM5700-SPRAY5% added to the ground and water (note: once a month during the rainy season).

Due to the ventilation of finished products and semi-finished product warehouses, when the outdoor humidity is greater than the indoor humidity, close the doors and windows, and open the doors and windows on the contrary, record the humidity and temperature changes, and if the indoor relative humidity is 80% in the wet season. Dehumidifying equipment should be installed to reduce the risk of moisture mildew of the product.

There are three main ways to prevent mildew in leather:

Method 1: Add it when tanning. Add a special anti-mildew agent for leather, which is composed of a new type of organic polymer material, and a certain amount of fragrance and leather surface smoothing agent.

The main types of antifungal agents were N-dichloroethylene salicylamide and N-octyl-4-isothiazolin-3-one.

Method 2: When coating (special top coating), adding a special leather antifungal agent to the coating is one of the most effective methods. The quality of genuine leather products is often seriously affected by the growth of mold and yeast due to the presence of humid environment, the presence of animal dirt and high temperatures.

The growth of mold on the leather will make the leather lose its luster, and the enzymes secreted by the mold will erode the leather fibers, causing the grain to crack and mildew, reducing the physical and mechanical properties of the leather and shortening the service life of leather products.

Method 3: After the leather is made into a finished product, the leather antifungal agent can be sprayed directly.

If the leather garment is stained with rain, it should be immediately dried with a towel or clean cloth, and placed in a cool and ventilated place to dry, do not expose to the sun or bake, otherwise the leather garment will harden or shrink, and then the leather anti-mildew agent (if not clean, clean first).

How to deal with damp and mildew of leather clothing (no leather cleaner and anti-mildew agent): use a brush and a clean cloth to wipe the moldy part clean, hang it on a hanger in a cool and ventilated place to dry (about 24 hours later), thoroughly clean it with leather cleaner that simulates leather oil, put on leather anti-mildew agent, and then store it in a dry and ventilated environment after cleaning. In a more humid place, you can use a clean old single coat or cloth cover to preserve.

This keeps the leather absorbing and releasing moisture under different environmental conditions.

Leather clothing must be hung when stored, not folded for storage, and cannot be pressed under other clothes. When the weather is good, you can put the leather jacket in a cool place to ventilate (avoid direct sunlight), dry and cool before storing.

1. We recommend using Meiboss leather mold remover for mold removal treatment, pour the leather mold remover on a dry cloth and wipe the moldy parts until the leather surface is wet. Or spray the moldy leather directly on the surface of the moldy leather with a leather mold remover with a spray head, and let it dry or blow dry after the mold disappears.

2. After removing the mold, in order to make the leather no longer mildew, you can do another anti-mildew treatment measure, spray the leather anti-mildew agent evenly on the surface of the leather, and dry it naturally.