Why does iPhone 6 turn off automatically at every turn?

Updated on number 2024-03-23
13 answers
  1. Anonymous users2024-02-07

    First determine whether it is caused by the system, Settings-General-Restore-Restore System Settings. If it can't be solved, back up your data, "Erase all content and settings", and then connect to your computer (Internet connection required, iTunes installed) to complete the automatic activation.

    Then, switch to "Timer". Next, you can see the current time displayed at the top of the center of the phone. The time of the silent writing was a little after 9 o'clock, and if you want to set it to turn off automatically around 11 p.m., you need to set the timer to 12:00.

    At the beginning, the timer is 0:01, and it can be dialed to 12:00.

    Then, click "When the timer ends, enable" to enter the new interface to set up.

    Swipe your finger to the bottom of "Stop running" and tick it.

    Then, go back to the previous interface and click "Start Timing".

    Then, the phone starts to count down, and it will automatically turn off when the time reaches 0:00.

  2. Anonymous users2024-02-06

    The iPhone 6 automatically shuts down at every turn, and it may be that the hardware in the phone has been damaged.

    If it is determined that the phone automatically shuts down due to low battery, then there should be a problem with the phone's hardware.

    It is recommended that users bring their mobile phones, invoices, and warranty cards to the local brand customer service for testing.

    Software failure, because there is a bug in the software operation, the internal mechanism automatically determines the restart, so it will be found that it will often automatically shut down and restart. You can try to upgrade the software again.

    When the temperature is too low in winter, the iPhone will also automatically turn off and turn on the battery protection mode.

  3. Anonymous users2024-02-05

    Summary. There are many reasons for you to find out that Apple automatically shuts down and turns on. For example, mobile phone software conflicts, iOS system vulnerabilities, aging battery, full system space, etc., will cause the iPhone to automatically shut down and restart. It is recommended to try the following solutions:

    1. If your Apple phone occasionally has an auto-restart problem, then don't worry, it may be caused by an iOS system error or your phone suddenly stuck.

    What's going on with the Apple 6 auto-turn on and auto-shutdown.

    There are many reasons for you to find out that Apple automatically shuts down and turns on. Zheng Ru: Mobile phone software conflicts, iOS system vulnerabilities, battery aging, system space full, etc., will lead to the phenomenon of automatic shutdown and restart of the iPhone.

    It is recommended to try the following solutions: 1. If your Apple phone occasionally has an automatic restart problem, then don't worry, it may be caused by an iOS system error or the phone suddenly jammed.

    So how to solve it?

    2. If the automatic restart phenomenon occurs frequently, please uninstall the recently installed software, which may be caused by the incompatibility between the software and the system, then check whether the phone is normal after uninstalling. 3. If not, please check Apple's mobile** system for a system update prompt, if so, please try to upgrade the iOS system to the latest version. 4. Or try to do a factory reset by moving** to fix the auto-restart issue.

    The first-generation iPhone was released on January 9, 2007 by then-Apple CEO Steve Jobs, and was officially released on June 29 of the same year. The latest iPhone model is the thirteenth-generation iPhone 11, iPhone 11 Pro and iPhone 11 Pro, released in September 2019, and the multi-touch technology and user-friendly interface of the iPhone 11 Pro are considered to be the decisive factors in its success, but have also had a profound impact on the smartphone designs of other manufacturers. Thank you.

  4. Anonymous users2024-02-04

    Factory reset via iTunes can solve the problem. The specific steps are as follows:

    1. Directly after the Apple logo is lit and off, short press the volume + button.

    2. If there is no problem at this time, continue to short press the volume- button.

    3. To complete the above operations, you need to press and hold the power button.

    4. In this way, it will be turned on normally according to the diagram, and the requirements can be realized.

  5. Anonymous users2024-02-03

    Turn on the phone to see if it can be turned on, if not, plug in the charger and charge it for ten minutes to see if it can be turned on, if it doesn't work, it may be that the hardware is broken, either repair it, or change the phone, good luck!

  6. Anonymous users2024-02-02

    See if you can turn it on.

    If it doesn't work, just charge it for a while and try again.

  7. Anonymous users2024-02-01

    There can be many reasons why an Apple phone automatically shuts down, and here are some possible reasons and solutions:

    1.Battery too low: If the battery is too low, the iPhone will automatically shut down to protect the battery. The solution is to charge it to a sufficient charge.

    2.Software issues: If there is a problem with your phone's system or app, it can also cause it to shut down automatically. You can try upgrading your operating system or uninstalling and reinstalling apps that may be causing the problem.

    3.Hardware issues: If the hardware of the manual retardant fails, it may also cause the machine to shut down automatically.

    For example, aging batteries, poor contact with battery chargers, loose battery connectors, etc. If it is a hardware problem, you need to contact Apple customer service or professional repairers for repair and repair.

    4.Too high temperature: If the ambient temperature is too high, the phone may automatically shut down to protect the electronic components. The solution is to place the missing socks of the mobile phone in a cool place to avoid prolonged exposure to high temperatures.

    To sum up, if the Apple phone often shuts down automatically, you can try the above solutions according to the specific situation, or contact Apple customer service or professional maintenance personnel for repair and repair.

  8. Anonymous users2024-01-31

    Battery hardware, system, motherboard, and weather are all likely to cause the aforementioned automatic shutdown issues. The best operating environment for iPhones is room temperature of 15 degrees Celsius to 22 degrees Celsius.

    According to the above-mentioned technical personnel, if the customer has an automatic shutdown, he can report the IMEI number number on the back of each iPhone to the customer service staff to inquire about the battery hardware status; If the battery hardware is fine, it is recommended to upgrade the system, if the system upgrade does not solve the problem, it means that the user has incomplete software package installation during the system upgrade. "The quality standards of the battery are not uniform, and the specific problems of each mobile phone may need to go to the repair point to test the motherboard to be truly determined. ”

    A number of Apple users who have been to the maintenance and testing point told The Paper reporter that after some mobile phones have been tested, the operation of their battery hardware has not been abnormal. At the same time, the defenders also said that after upgrading the system, there will be a period of improvement, but after a few days, there will still be an automatic shutdown. If you go to the repair point to test the motherboard, it will cost nearly 3,000 yuan in maintenance fees, and the warranty will be paid for yourself.

    Analysts in the consumer electronics industry said that there may be two possibilities for the automatic shutdown of mobile phones, one is that the battery performance curve is aging beyond the manufacturer's original modeling, resulting in inability to compensate, and the battery percentage is inaccurate. The second is the aging of the battery, the internal resistance is greatly increased, and in some applications that need to consume large currents, the internal resistance output is not enough to shut down.

    The above-mentioned industry insiders believe that the road to rights protection is not easy to take, because the quality standards of the battery are not uniform, and there will be Apple's official inspection of the battery hardware qualified, but it is still frequently automatically shut down. At present, we can only wait for Apple's official recall.

  9. Anonymous users2024-01-30

    1. System firmware compatibility issues.

    Due to the rewriting of some functions of the iOS system firmware, which affects the compatibility between the original system firmware and the mobile phone hardware, the possibility of automatic shutdown of the Apple mobile phone caused by the system firmware after jailbreaking exists.

    2. Application software plug-in compatibility issues.

    Since these plug-ins have not been rigorously tested by a third party after jailbreaking, it may cause compatibility issues with the system, causing the iPhone to shut down automatically.

    3. Hardware problems: battery leakage.

    If you use a non-original charger, the charging voltage and charging current are not strictly controlled, it will also damage the battery of the iPhone and cause shutdown.

    4. Hardware problem: motherboard power supply IC

    If there is a calculation error in the logic control unit, it is clear that the mobile phone battery is charged, and the lack of power supply IC in the motherboard power supply IC layer will think that the mobile phone battery is out of power, and the mobile phone will be automatically turned off.

    5. It is recommended to bring the equipment to the regular after-sales center for repair and treatment as soon as possible, so as to avoid problems such as battery aging, motherboard damage, and system crash.

  10. Anonymous users2024-01-29

    There are two main ways to solve the problem of iPhone 6 automatic shutdown:

    hard reboot; Update iOS;

    recovery of the device; The specific steps are as follows:

    1.hard reboot;

    2.Update iOS;

    3.recovery of the device;

    If both of these methods don't work, you may need to use iTunes to restore your device to its original factory settings. Remember to back it up beforehand, otherwise you will lose all your data.

  11. Anonymous users2024-01-28

    Apple iphone 6s automatic shutdown solution.

    1. There are many cases of iphone6s automatic shutdown, first of all, make sure that your mobile phone has sufficient power, if the power is less than 20% automatic shutdown, it means that the battery life is not long.

    2. Then the second point, if the indoor or outdoor temperature is too low, generally lower than -10, the automatic shutdown may be caused by the reduction of the activity of the lithium-ion battery, which causes the mobile phone to automatically shut down.

    3. If the indoor humidity is too large (this point should be paid attention to by friends in the south), there is no problem with general drying, but the humidity is too high, and the mobile phone is exposed to excessive humidity for a long time.

    4. If there are things with strong magnetic radiation around, such as induction cooker or microwave oven, please stay away, which is also one of the main culprits that cause the mobile phone to automatically shut down.

    5. Be careful not to place the mobile phone with magnetic materials, especially magnets, as magnetization can also cause the mobile phone to malfunction.

  12. Anonymous users2024-01-27

    How it works:

    1.It is possible that the phone is out of battery, so you can connect the phone to a charger to charge it.

    2.The temperature is too low, or it may cause an automatic shutdown.

    3.We can press the power button of the phone at the same time with the home button to let the phone restart.

    5.If the above method still doesn't work, you can take it to the after-sales service center to have a look.

    The content of this page of Sogou Guide only represents the author's own opinions, and if any disputes arise therefrom, the author is responsible for it and has nothing to do with Sogou. The content of the Sogou guide on this page is for reference only, please operate cautiously according to your actual situation. In particular, please consult a professional for matters involving your interests or those of a third party.

  13. Anonymous users2024-01-26

    Here's why:

    The leakage of the motherboard of the mobile phone causes the current to be excessive.

    The protection circuit in the lithium battery is overly sensitive, so the current will be cut off as soon as it is large.

    The battery itself is aged.

    There is dirt on the metal sheet in the contact area of the battery, which causes poor contact with the power supply.

    The joint between the battery and the phone is prone to loosening.

    If after the inspection, it is found that the first two problems are the first two problems, if it is within the warranty period, go to KF, and after the warranty period, then find a good reputation of a special repair shop to repair. If the latter two problems are caused by the oxidation of the dirty metal sheet of the battery, the situation will be improved as long as it is wiped clean with a glue stick. Putting paper or film between the battery and the phone can also solve the problem of poor contact caused by loose batteries.

    Apple Profile: At 1 a.m. on September 10, 2014, Apple's autumn new product launch conference was held at the Flint Theater in Coubertino, USA, and Apple released the iPhone

    6、iphone

    6plus two phones, the size is inches and inches.

    iphone

    6 uses the new A8 processor, which is 25% faster than the A7 used on the 5S. iphone

    6 Released on September 19, 2014.

Related questions
16 answers2024-03-23

iPhone6 to set the screen color of the operation as:

Step 1: Click on the desktop "Settings" icon. >>>More

5 answers2024-03-23

2 Connect iPhone6 or iPhone6 Plus to the computer through a data cable, then open the "Sync Assistant", and then the tool will automatically recognize the iPhone6 phone, the first time you connect to the computer, you need to install the driver for iPhone6 first, and then you can see the following operation interface, click the [Clean Junk] button behind the bottom capacity, you can clean up the cache. >>>More

7 answers2024-03-23

Tools Required: iPhone6 phone.

To set up a silent photo step: >>>More

6 answers2024-03-23

apps can collect all kinds of health data, such as from the phone's own sensors, and can also sync with other third-party health devices, so that we can easily manage all the data. >>>More

4 answers2024-03-23

If you're looking for Find My Phone, you'll need to meet the targeting criteria: >>>More