My laptop won t turn on, it just has two lines of English letters on it

Dear users, hello:

What you say about the situation alone will not immediately diagnose the cause for you.

If it is a hardware failure, you will generally hear the buzzer in the chassis emit a long time.

Different beeping sounds, in this case, you can disconnect the power first, and then turn it on.

chassis, re-plug the graphics card, memory and other hardware.

If words appear on the screen and there is no sound, don't worry, according to me.

Experience, in general, possible situations have concentration, and I say the two most common.

First, in the upper left corner of the screen, the operating system was not found...

This means that the operating system cannot be found, either because the hard drive has recently been partitioned, or a new hard drive has been installed, resulting in the original primary hard drive becoming a secondary hard drive. So the system.

Unable to find the original system. If this is the case, usually when the computer starts, you can keep pressing del or F1 according to the model to enter the relevant options. Specific buttons.

There will be a prompt on the screen.

Another reason is that the computer partition is altered, which is more cumbersome and requires partitioning.

Perform a recovery, or reinstall the system. This involves the issue of data backup. So.

Please ask a professional to cooperate in the completion.

If you find text similar to the following at the bottom of the screen:

press f1 to continue ..

Then you just need to press F1 to continue. The reason may be that the motherboard battery life is up.

So it can generally be solved after changing the battery. The price is cheaper. Replacement is also simple.

Since the hints you gave weren't detailed enough, that's what comes to mind for the time being.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 Gigabit broadband free experience, ultra-clear TV ITV, telecom activities can be directly queried through the business hall.

Summary. In this case, it means that the computer cannot find the boot boot, there are two possibilities: one is that the system boot is damaged or lost, and the other is that the motherboard cannot recognize the hard disk1, boot and press del into the BIOS to view the hard disk information.

2. If the hard disk information exists, it can be determined that the system boot is lost or damaged. You can fix the boot with PE, or you can directly reinstall the system to solve the problem.

3. If the hard disk information does not exist, you will not see the hard disk information in the BIOS. Shut down and unplug the power, replug the hard disk and change it to a SATA port (motherboard), or change a SATA cable, and then enter the BIOS, if you still can't see the hard disk information, you can basically determine that the hard disk is broken, please replace the hard disk.

The notebook appears with two lines of letters and does not turn on.

Hello, this situation is generally not found to boot the hard disk, it is recommended to turn on the host after power-off to plug in the data cable and power cord of the hard disk again, or after booting into the motherboard BIOS to check whether the boot item has a hard disk option, change it to the first boot item.

In this case, it means that the computer cannot find the boot boot, there are two possibilities: one is that the system boot is damaged or lost, and the other is that the motherboard cannot recognize the hard disk1, press del to enter the BIOS to view the hard disk information 2, if the hard disk information exists, it can be determined that the system boot is lost or damaged. You can fix the boot with PE, or you can directly reinstall the system to solve the problem.

3. If the hard disk information does not exist, you will not see the hard disk information in the BIOS. Shut down and unplug the power, replug the hard disk and change it to a SATA port (motherboard), or change a SATA cable, and then enter the BIOS, if you still can't see the hard disk information, you can basically determine that the hard disk is broken, please replace the hard disk.

If that doesn't work, it's best to upload a screenshot of the fault.

No, it's been useless for a long time.

Can I take a screenshot of the fault?

Well, I see. In this case, the system boot is lost. If you don't have a USB drive PE tool, you can't fix it, and you can only consider redoing the system.

Oh, you're talking about the need to reinstall the system, right?

Well. Yes. If you don't use this machine for a long time. Just rebuild the system.

Okay, thank you.

When the computer is turned on, there are two lines of English letters, and it cannot be turned on, which may be due to a hard disk failure.

Check in the BIOS first to see if you can find the hard disk in the BIOS. If you can't find the hard disk in the BIOS, the hard disk is broken. If you can find the hard disk in the BIOS, set the optical drive to boot, put the system disk in the optical drive, and reinstall the system.

Ways to repair your hard drive:

1. Make use of the DiskGenius tool.

DiskGenius tool has a sophisticated algorithm, powerful functions, a wide range of user groups, supports many forms of data recovery, is fully functional, and has many advanced functions, one of which is the hard disk bad sector detection and repair function.

2. Use the tools that come with the Windows system to repair.

Double-click to open [This Computer], right-click the target hard disk, and select [Properties]. Select the Tools tab bar in the Properties window, and then click the Inspect button. This is mainly to check if there is an error in the file system in the computer drive.

Then click [High Source Scan Drive] in the pop-up window, and then wait for the system to scan. <>

Dear, if the prompt shows that there was an error when loading the operating system on the computer, it cannot be continued. For dealing with such problems, regardless of whether the direct cause can be found, it is recommended to back up important data to other storage media as soon as possible (e.g., e.g

USB flash drives, portable hard disks, burning discs, etc.). The main reason is that there is a possibility that the hardware (e.g. hard disk) will also be damaged, so it is recommended to back up the data in order to avoid data loss.

The main reasons for this phenomenon are as follows: 1. Hard disk failure (such as: hard disk bad sector, hard disk circuit failure, etc.) 2. The boot information of the hard disk MBR is incorrect (Note:

Relative to the host, the hard disk is not installed with any system)3、The boot file or configuration file of the operating system is incorrect4、The boot disk of the current hard disk is activated incorrectly or not activated5、The current Xingshilu host has multiple hard disks, but the boot sequence is set incorrectly, and the boot disk cannot be effectively identifiedThe solution is to use third-party tools such as: DiskGenius (formerly known as DiskGen), gdisk, pqmagic, etc., to C disk (i.e., system disk) (Note:

system). You can also boot into a PE environment and use the built-in disk manager to activate the system tape.

Two rows of English letters appear when the computer is turned on, no need to insert a USB flash drive, no need to open the chassis, and it can be done in one second.

This is the optical drive booted**. Do you have a disc drive? If the disk is a disk, go to the BIOS to set the first boot as the hard disk to try. If the first boot is a hard disk boot. Then your hard drive boot file is missing, this one is more troublesome. Send it for repair.