What kind of bicycle shock absorber is best? Do road bikes have shock absorbers

Updated on physical education 2024-03-26
7 answers
  1. Anonymous users2024-02-07

    Advantages: Mountain bikes with rear suspension can better cushion the discomfort caused by ground vibration when encountering bumpy roads, especially when driving fast or downhill, and can provide better tire grip.

    Disadvantages: The car with the rear shock absorber is more laborious when driving, because the shock absorber of the rear shock absorber will lose force.

    The shock absorber is used to suppress the impact from the road surface after the spring absorbs the shock. It is widely used in automobiles to accelerate the attenuation of frame and body vibrations to improve the driving smoothness of automobiles. When passing over uneven roads, although the shock absorbing spring can filter the vibration of the road surface, the spring itself will also have reciprocating motion, and the shock absorber is used to suppress this spring jump.

    The shock absorber and elastic elements bear the task of cushioning and damping the shock, and the damping force is too large, which will make the elasticity of the suspension deteriorate, and even damage the shock absorber connection. Therefore, it is necessary to adjust the contradiction between the elastic element and the shock absorber.

    1. In the compression stroke (the axle and the frame are close to each other), the damping force of the shock absorber is small, so as to give full play to the elastic effect of the elastic element and alleviate the impact. Here, the elastic element plays a major role.

    2. In the suspension extension stroke (the axle and frame are far away from each other), the damping force of the shock absorber should be large and the shock absorption should be carried out quickly.

    3. When the relative speed between the axle (or wheel) and the axle is too large, the shock absorber is required to automatically increase the fluid flow rate, so that the damping force is always kept within a certain limit, so as to avoid excessive impact load.

  2. Anonymous users2024-02-06

    No.

    Cycling road bike is a small project in cycling. During the race, all athletes start collectively at the starting line, and the athletes are ranked in the order in which they reach the finish line.

    Introduction

    Road cycling originally originated in 1896 with the first modern Olympic Games, but only included individual races. In 1912, the Olympic Games established a road team event and was included as a competition event. In 1984, the women's individual road race was added to the Olympic programme.

    The highest organization for road cycling is the International Cycling Union, founded on April 15, 1900 and headquartered in Lausanne, Switzerland. The highest organization in China is the China Cycling Association, which was founded in Beijing in 1959.

  3. Anonymous users2024-02-05

    As the name suggests, road bikes are ridden on smooth roads and generally do not use suspension. The main goal of road bikes is to ride at a high speed, and the use of shock will increase the weight of the bike, and it will also unload the force, which is not suitable for high-speed riding. Some highway suspension is actually used for off-road purposes, such as pulling the new road suspension fork.

    Off-road roads do not focus on speed, but on comfort and stability, so the addition of shock absorbers will correspondingly use wider tires.

  4. Anonymous users2024-02-04

    It depends on the purpose of the bike and the functionality of the bike.

    Because the suspension device needs to strengthen the rigidity of the frame, it will increase the weight of the bike, increase the elasticity of the body and improve the comfort, while affecting the force effect of the cyclist.

    Urban recreational vehicles are used for commuting, and there is not much difference between whether there is a suspension or not.

    Mountain bikes and road bikes: As road bikes, all structures are for speed, so those that can reduce weight must be removed, so there will be no design such as shock absorbers, and the road conditions are better and there is no need for shock absorbers.

    There are two types of mountain bikes: shock-absorbing and non-shock-absorbed. The frame with shock absorption is called a soft frame, and the one without suspension is called a hard frame. The hard frame car is suitable for climbing hills and doing some stunts, and the soft frame car can play mountain rushing and some jumping moves.

  5. Anonymous users2024-02-03

    Generally, mountain bikes have shock absorbers to adapt to bumpy road conditions. Due to the large weight of electric vehicles, they are often equipped with shock absorbers, so that the handlebars will not lose control and fall down when crossing ditches and ditches. Lightweight city bikes don't come with heavy shock absorbers.

  6. Anonymous users2024-02-02

    Hello: 1, electric car with shock absorption function, suitable for riding in rural or hilly areas.

    2. If you ride in the city, the role of shock absorbers on flat roads is not great.

  7. Anonymous users2024-02-01

    The bicycle is boring with shock absorbers and without, and it must be a little better with a shock absorbing cover.

    If you have shock absorption, you will have a better cushioning driving comfort when driving on bumpy roads, and if you don't have it, it will be more bumpy and less comfortable.

    When encountering a blind and bumpy road surface, it can better cushion the discomfort caused by the vibration of the ground, especially when driving fast or downhill, it can provide better tire grip, and the mountain bike without rear suspension has a feeling of vibration when driving, which brings discomfort over time.

    Classification of bicycles:

    1. Ordinary bicycle: generally refers to Kun bike, and the riding posture is bent leg standing, which has the advantage of high comfort and is not easy to get tired after long-term riding. The disadvantage is that it is not easy to accelerate in the bent leg position, and it is difficult to achieve high speeds due to the fact that ordinary bicycle parts are mostly made of very ordinary parts.

    2. Exercise bike: healthy, fashionable, new concept and new concept design of fitness bike, the main feature is the dual power of hands and feet, the speed can reach 40km h; There are many ways to do work, and the fitness effect is good. When riding this bicycle, the hands and feet can do work on the bicycle drive at the same time, or you can use the hands or feet alone to drive the work.

Related questions
17 answers2024-03-26

Successively two: 2Thin tires are used on the road, which is more labor-saving. 3.On the highway, naturally, it's a road car. >>>More

17 answers2024-03-26

Basic rules:1Road section design (road section helps the spectators to watch the game). 2.Start and finish area (start and finish area to judge the results of the runners). 3.Classification (various levels of competition). 4.Individual competition.

10 answers2024-03-26

Automatic transmission.

According to the speed of the car, engine speed, power load and other factors, the automatic upshift and downshift, without the need for the driver to operate the clutch. >>>More

15 answers2024-03-26

If you don't consider your actual use and capital reserves, of course, the higher the better. Generally speaking, the higher the number of shifts, the smoother the shifting, which can bring a comfortable, smooth feeling to the ride, and of course, the higher the speed. From nearly 1,000 yuan of DEORE to nearly 10,000 yuan of XTR, they are all 27-speed masterpieces. >>>More

21 answers2024-03-26

Brother, you can get one! Cheap Giant variable speed mountain bike, I went to Giant some time ago to take a look, called Giant CTX26The 618 yuan sold in the physical store in Mianyang, Sichuan is a 26-inch steel frame, Shimano 18 transmission transmission, although it is a low-end transmission of SHIMANO, but it is much better than the transmission that I have never heard of in China! >>>More