Wireless routing Seamless roaming, seamless roaming between two or more routers

Hello landlord, the password of the wireless router is generally basically the same at the beginning, you need to reset it yourself, and there is a limit on the number of devices connected, and it is very troublesome to set up, easy to drop. So I suggest you use Tencent National WiFi to generate a wireless signal, so that you won't encounter the problem of dropped calls.

Because the national wifi is self-driven to create wifi signals, you don't need to set it manually, you only need to wait a few minutes, plug and play. And the signal created is strong, you use your mobile phone to log in to support *** scanning connection, very smart and fast. And there is also an anti-rubbing network function, and it can intercept Trojans, so that you can surf the Internet with peace of mind.

Hope mine can help you.

Hello! You can go to the routing page to change the password, and go there to set the wireless password.

Generally, when you set up a route, you need to set the Internet access and password, and then set up the wireless.

You just need to set the wireless name and password there to be complicated, so that you can prevent others from accessing the network.

If there is a lot of rubbing the net, there will also be such a problem, the network speed can not keep up or the connection is dropped.

To prevent others from rubbing the net, you can choose to block or kick out.

Under the network used by the national wifi, it can speed up your network speed, stabilize the connection without dropping and many other functions.

Hope it helps, hope.

The two routers have the same wireless name and password, forming seamless roaming, and the method problem is here.

1. First turn on the router** and log in.

2. Then set the IP of the bus router to enable the DHCP and DNS functions of the bus router.

3. The second router is a wireless router.

IP is set, the channel is set to 1, the band bandwidth is set to auto, and the mode is set to 11BGN mixed.

4. The third router is also a wireless router, the IP is set, the channel is set to 6, the band bandwidth is set to automatic, and the mode is set to 11BGN mixed.

5. Finally, for the security of the wireless network.

To set the encryption method, then save, wireless wifi roaming is done.

Extend. TP-Link router, the address to enter the console is basically the same, or it will pop up after entering this address, prompting you to enter your username.

and password, usually the account and password are the same: admin or root

You get to look up the router brand you used to remove the pants online, and then look up the stuff above.

After entering the console, find the following "Network Parameters" option on the left side, click it to open the submenu, find "WAN port connection type", if you are an ADSL user, select "PPPoe", then select "Normal Dialing Mode", and then "WAN Port Settings" In this option, you will see that it is required to enter "Internet ID" and"Internet password"This is the account number and password provided to you by Telecom. Be sure to fill it out correctly.

Then below the connection method, select the connection method, and select the automatic connection. In this way, you can automatically connect to the Internet every time you turn on your computer in the future (of course, you have to make sure that your cat and router are turned on first).

Once you've done all of the above, click Save.

Then turn off the cat and the router. Turn off for two minutes. Then turn them all back on. Source accompanies OK. You'll find that you can access the internet. And after turning on, you don't need to hail on the computer to connect to the broadband network, it will automatically connect to the Internet.

The second wireless router can be set up according to the wireless bridging method.

Wireless router wireless bridging.

Method setting method:

1. Confirm the main wireless routing parameters.

Confirm the wireless signal name, wireless encryption method, wireless password, and wireless channel of the primary router.

Note: Before setting up, the wireless channel of the main router needs to be fixed.

2. Set up the secondary router.

1. Modify the wireless parameters and turn on the WDS scan signal.

Connect the computer to the sub-router, log in to the management interface, click Wireless Settings >> Wireless Basic Settings, modify the SSID number to be the same as the main router, fix the channel, check to enable WDS, and click Scan.

2. Select the main router signal.

Find the SSID of the primary router in the scan page and click Connect.

Note: If the WDS cannot scan the signal of the primary router, make sure that the wireless function is enabled on the primary router, and try to reduce the distance between the primary and secondary routers.

3. Select the encryption method and enter the wireless password.

Key Type Select the encryption method of the main router, enter the wireless password of the main router in the Key field, and click Save after entering. You don't need to restart your router and proceed to the next step of setup.

4. Set the wireless password of the secondary router.

Click Wireless Settings >> Wireless Security Settings, select WPA-PSK WPA2-PSK, set the same wireless password as the main router in PSK Password, and click Save. When the system prompts "You have changed the wireless settings, it will take effect after restarting", click Restart, and when the restart prompt page pops up, click OK and wait for the restart to complete.

How to set up a router so that multiple wireless wifi hotspots can roam seamlessly without dropping the line?

When there are multiple APs in the open network environment of the network training stove, and their microunits overlap with each other to a certain extent, the wireless user can move in the entire WLAN coverage area, and the network card without the matching line can automatically find the AP with the largest signal strength nearby, and send and receive data through this AP to maintain an uninterrupted network connection, which is called wireless roaming.

Wireless roaming communication is very important for both business users and mobile communication operators, and in order to successfully achieve roaming communication, in addition to network construction, test and measurement systems that can ensure good quality of service throughout the network coverage area are also very important. In modern society, the use of mobile ** has become very common, and with the increase of mobile ** users, the number of users roaming in other places is also rising sharply. In response to this growing market demand, some mobile communication operators have adopted the strategy of merging or establishing a large number of "no roaming charges" networks independently, but most operators still rely on roaming agreements signed between them for cooperative management.

These operators are facing some tough questions about how to ensure that their networks can truly and accurately and effectively deliver satisfactory services to roaming users. Roaming users are relatively more important to operators because, unlike local users, they can change networks at any time. In addition, providing security while providing fast channel response and high-quality service poses a serious challenge for MNOs.

Mobile users require network management to take place "behind the scenes", and signal problems during roaming can have a significant impact on network performance.