I have a useless wireless router how to turn it into wireless wifi

1. The problem of your problem is not clear, and the wireless routing can be set up in a wireless way.

2. "Prompt no wireless network card" means that there is a wireless router, and you can't get on it, because you don't have a network card installed.

Supplement: 1. The route is divided into line (can only be connected by wire) and wireless route (can be used by wire and wireless at the same time). Don't know which one you are?

2. Wireless network card is a necessary prerequisite for wireless Internet access. Your computer does not have a wireless network card, and you can't connect to it if you have a wireless router.

3. Check whether your computer has a wireless network card and whether there is a driver installed.

Is it your first time to get wireless routing, if so, the operation process is quite troublesome, and if there is a slight mistake in the setting, it is easy to have problems.

So I still don't recommend you to use router to set up wifi.

But if you are greedy, Tencent National WiFi may be able to help you,This portable WiFi is to support driver-free creation of WiFi signals,Plug and play,It's quite simple。 And the created wifi signal is as stable as the router's, and it may be a little farther in terms of transmission distance. This makes it easier to create wifi, which should help you.

Connect the home network cable to the WAN side of the router, and use the computer (or mobile phone) to set the account password and wifi password. That's it.

There must be a broadband network, and if you don't have a network cable, you can use your mobile phone to set up Internet access.

1. The bus of the broadband network is connected to the WAN port of the router, and the mobile phone is connected to the router through WiFi.

2. Open the browser on your mobile phone and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

First of all, you have to root the network cable to access the network, otherwise everything will be in vain.

Yes, as long as there is a wired router and an external network cable, dial up with the router and turn on the wifi function of the router, you can use your mobile phone to connect to the wifi to surf the Internet.

How to use the wireless router settings:

1. Plug the network cable into the WAN port of the router, plug the other network cable into the LAN port of the router, and connect the other end to the computer;

2. Open the browser on the computer, enter or, press enter;

3. Enter the username and password of the router, which is generally admin (please check the bottom prompt of the router for details);

4. Select "Setup Wizard" on the left and click "Next".

5. Select "Let the router automatically choose the Internet mode" and press confirm;

6. Click Setup Completion, and then select "Restart" to complete the setting.

1. You need to purchase a wireless router and configure the wireless router.

2. The wireless router configuration method is as follows:

Assuming the IP address of the router is, refer to the label or instruction manual on the router box.

1. One end of the network cable is connected to the WAN port of the router, and the other end is connected to the LAN port of the cat;

2. Open the browser, enter the IP address of the router), enter the router account and password (see the label or manual on the router box);

3. Click Next;

4. Select PPPOE (ADSL Virtual Dialing) in the Internet mode, and click Next;

5. Enter the broadband account provided by the broadband operator in the Internet account and the broadband password in the Internet password;

6. Set the wireless network name in the SSID, select the WPA-PSK WPA2-PSK encryption method, and set the wireless password of no less than 8 digits in the PSK password;

7. Click Restart, and the router is set successfully.

3. How to connect a desktop or laptop with a wireless network card to wifi:

Tap the network icon in the lower right corner, select the SSID wireless device name, and click Connect.

At this time, if there is a wifi password, the system will prompt you to enter the wifi password, enter it.

Fourth, the method of connecting mobile devices to wifi:

1. Click the settings icon on your phone or tablet;

2. Turn on Wi-Fi and click Wi-Fi.

3. Select the corresponding SSID wireless device name, enter the WiFi password, and click to connect.

If you use it at home, you can directly remove the original router and use the wireless router. Setting up a wireless router and a wired is just one more step to set up a wireless key.

Open the browser, enter enter in the address bar, and then enter the login account password, (if you haven't changed it, this account password is marked on the back of the router), you can enter the route.

If your router is not set, you can click the second item on the left, set up the wizard, and then select PPPoe, enter your broadband connection account password;

Use PC4 browser input to enter the wireless router B, and then according to the wireless route B setting wizard can be set up, when choosing the connection method, you can choose to automatically detect.

This situation is caused by the router not being configured or the interface being connected incorrectly.

To install the router, you need to install and configure it in the following order:

1. Connect the home network line to the WAN port of the router, and connect other terminals of the computer to the LAN port of the router.

2. Log in to the router according to the IP address and user name password on the back of the router (some new routers do not have a user name, and the user sets the password by himself when logging in for the first time).

3. Follow the setup wizard to set up. First, set the WAN port connection, set it to PPPoE connection, and enter the broadband username and password.

4. Enter the wireless SSID and wireless password, and finally click Done.

First of all, your router has to be a wireless router. Second, you need to go to the configuration interface to configure your router. Entry method: There is an IP address and password behind the router, and it can be configured after entering.

The external network of the router is not set up.

The router can only be used when it is set up, and there is a method in the manual.