How to change your router passwordWhat should I do if I forgot it?

1. If you have set up to save the username and password when logging in, then you can directly enter the router login address, and the pop-up login box will have the username and password that have been saved, and we can log in directly, as shown in the following figure:

You can directly enter the router interface, if you need to forget the password, then you can do a "factory reset" inside the router to restore the initial default username and password, as shown in the following figure:

2. If you forget the router login user and password and can not log in to the router, you can also reset the router by following the methods:

First of all, find a round hole marked as reset on the front or back panel of the router, which is the reset button for the router to restore factory settings. In the power-on state, press the reset button with a pointed object for 5 seconds, and then you will see the SYS indicator in the front row of the router change from a slow flashing state to a fast flashing state, and then release the reset button, and then you can successfully reset.

It is recommended to use a pointed object to insert into the router reset hole, or a thin and hard wire and toothpick, etc., in fact, the reset is very simple, after the reset is successful, you can log in to the router with the default router login username and password.

Hello, do you want to know how to change your router password and what to do if you forget it?

There are two passwords in the router, one is the wireless password and the other is the login password, and each describes how to change each one

1. Change the router login password.

1. To modify the login password, you need to enter the router background, but if you forget your previous login password, you can reset the router and then use the original login password is generally admin, the router reset method is that the router has a reset button, generally next to the power hole, some are convex and some are concave, as shown in the figure, if it is convex after finding, you can press it directly, if it is concave, you can use a toothpick and other objects to press, generally press and hold the reset button for about ten seconds, the router will be reset.

2. Connect the router with the computer, open the browser, enter the general router address in the address bar is this or view the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

3. The option to change the login password is generally in the system tool.

2. Change the wireless connection password.

1. Connect the router with the computer, open the browser, enter the general router address in the address bar or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Workaround for wireless routing password forgotten:

1.Wired connection to a wireless router.

2.Open the computer browser and enter the gateway IP address of the nameplate behind the router (generally, enter the router gateway account and password to enter the gateway configuration interface. (If you have forgotten the password of the gateway account, you can press and hold the reset button to reset the wireless router.) ）

3.Go to the wireless settings page - wireless security - secret key, change the secret key to change the wifi password.

After restoring the router factory settings, you can log in with the initial username and password, which are marked on the label on the back of the router.

TPLINK's router recovery should do as follows:

1. Turn off the power.

2. Press and hold the RESET key (in the small hole on the back plate) and do not let go.

3. Turn on the power.

4After about 3 seconds, after the M1 M2 indicator flashes at the same time, release the button 5 After the router starts, the configuration will be restored to the factory default, the values are as follows:

Username: admin

Password: admin

Teach you to use your phone to change the router password, and pay attention to the details is very simple.

After resetting the router's factory settings, re-enter your network account and password.

How to set up a mobile phone to change the router password?

Connect your computer to any LAN port of the router, enter the settings page, and change the WiFi name (SSID) and password of the router.

2. After successful login, the running status will be displayed, click "Wireless Settings";

3. Click "Wireless Security Settings" again, and the wireless network name (SSID) is a name, which can be filled in casually, generally letters + numbers;

4. Then set the password, generally choose the WPA-PSK WPA2-PSK encryption method (password.

If you want 8-16 pieces, you can use alphanumeric.

combined); 5. After setting the password, click Save to prompt restart.

6. Click "Restart Router" in "System Tools" to restart the router.

How to change the wifi name if you forget the password of the wireless router See here!

2. Then use a slightly sharper pen tip to pierce the "reset" hole on the back of the router.

3. Some are "reset" buttons, and they are also holding down this "reset";

4. Disconnect the power of the router again, remember to press and hold the reset button or the reset hole. Because some routers need to be reset when the power is turned on, we also turn on the router power in this comprehensive method;

5. Turn the power on again, and all the indicators on the front panel of the router will flash rapidly

6. Keep the power on and turn on the power for about 5 seconds (some take 10s), and the indicator will return to normal flashing. At this point, release and hold the reset key to restore the router configuration to factory defaults.

7. After restoring the factory value, the router account is generally admin, and some of the passwords are also admin, and some of them are empty, and then the router background management IP should generally be, and some are. Some of this information can be seen from the back panel of the router. Have a great day.

Hello friends:

1) As long as you can enter the settings interface of the wireless router, you can view, if the other party has set a password, there is no way to view. If you forget the administrator password, you can only press the rest on the router to reset the twist, press and hold for 8 seconds, let the wireless router restore the factory value, and then reset the Internet access and password, and reset the wifi password.

2) If you know the password to enter the wireless router, enter the router to check the wifi password

1) First of all, the first step: is to enter in the address bar of the computer browser, (there are other network segments), and the IP label behind the router is the main one, so that you can enter the login interface of the wireless router.

2) Enter the password in this interface, if you don't know the password, there is no way to enter the router, and you can't check the wireless wifi password, assuming that its original password is 123456, enter the router's settings interface.

3) Then find the wireless security settings in the wireless settings, and then in the wireless security options, you can check the wifi password of this router.

Hope it helps you and I wish you happiness

Now after the factory reset, the system will automatically prompt you to enter the administrator password 2 times, and the management password after that is the one you set. Unless you log in to your router and change your password or do a factory reset.

Here's how to set up your router correctly:

After logging in, click on item 2 of the tree list on the left (depending on the router) "Setup Wizard", select your Internet access method, if it is home broadband, select item 2 PPPoE (ADSL virtual dialing), and then fill in your broadband account password point to save, and then the router prompts you to restart, wait for restart;

Select the encryption method of WPA-PSK WPA2-PSK, then set the wireless password and click Next, and the router is set up.

Select item 1 "Running Status" in the tree on the left, drop down to see the running status, if you can see the IP address (the above two settings can be used to observe the network connection status in this way), subnet, gateway, DNS and other items have numbers instead of blanks, you can be sure that the network has been connected;