Can Prime Z370 P connect two monitors at the same time?

In this case, there is no problem at all, it can install two monitors at the same time, but it can only control one panel, so be careful in this regard.

It is possible to plug in 2 monitors at the same time.

Nowadays, graphics cards are almost all dual-ended outputs, one VGA and one DVI, two DVI, or one DVI and one HDMI.

When connecting a monitor, only use VGA or DVI (depending on the interface type of the monitor), when connecting dual monitors, connect the two monitors to the VGA and DVI of the graphics card respectively, if the display has no DVI input, you can use the DVI to VGA adapter to convert the DVI of the graphics card to VGA.

Of course, this can be connected to two monitors at the same time, because their monitors are generally relatively good, well, generally speaking, it is okay.

The Z370-P motherboard has a DVI and an HDMI port, which can be used for one monitor each, or you can use the connector on a discrete graphics card to connect two monitors

Shall we press both monitors at the same time? I think that if you press two monitors at the same time, you can completely hide it, and it is better not to press it two hours ago.

It's possible to connect two monitors at the same time, but you'll have to buy a dedicated connector, otherwise you don't have to talk about it.

After connecting, it needs to be set in the driver, but it can be displayed at the same time. HDMI can transmit sound, anyway, I can use a screen with stereo, and the TV should be able too.

Buy a VGA in two.

Buy another HDMI to VGA cable.

That's it!

Two monitors can be connected.

——From Phelps Cottage Waterproof Phone Molly Special Android Client Edition Copycat machine, it's a cow, Molly cool your heart.

1. But set the display of the main and auxiliary machine and the display controlled by the keyboard and mouse.

2. Host with a discrete graphics card or an integrated graphics card.

4. Two DVI interfaces need to be used.

5. After the connection is completed, the main machine and the auxiliary machine are connected together without setting, and there is no independent of each other.

1. First of all, determine the configuration of the computer, if it is a computer without an independent graphics card, then the connection between the monitor and the computer uses the interface of the motherboard; In the case of a discrete graphics card, the connection between the monitor and the computer uses the interface of the graphics card.

2. If the computer has only one output port, such as only one DVI or VGA output port, then you need to purchase a one-to-two adapter to connect the dual monitors. However, this situation is rare, and now relatively new computers generally provide a variety of output interfaces.

3. Taking the latest mainstream configuration computers equipped with independent graphics cards as an example, the general independent graphics cards will provide a variety of output ports, including DVI interface, HDMI interface, DP interface, etc. In addition, the VGA interface is an older interface, if the discrete graphics card does not have a VGA interface and needs a VGA interface, you can also purchase a DVI to VGA adapter.

4. Next, we need to check what type of input interface is on the display side, the current display will generally have its own VGA or DVI interface, and advanced displays will also provide HDMI, DP interface.

5. According to the interface between the computer and the monitor, we prepare at least two of the VGA cable, HDMI cable, and DVI cable to connect the computer to the monitor. In this way, two monitors are connected to one computer host.

6. Open the computer below, we find that there is only one monitor with an image, at this time we need to set it to make both monitors display normally, take win7 as an example, right-click on the desktop mouse, click the screen resolution.

7. If dual monitors are connected, the system will automatically recognize, at this time we choose the No. 2 monitor without an image, as shown in the figure, there are several options in the "multi-monitor" option, among which the "Copy These Displays" effect is the same as the display content of the two monitors, and the "Expand These Displays" effect is displayed as a whole for the No. 2 monitor and the No. 1 display. (The setup method is similar when two or more monitors are connected.)

8. After setting up as needed, the dual monitors are assembled and set up.

9. In addition, the hardware method can also be used to realize the split screen, and the VGA divider VGA divider, also known as the VGA signal broadband matrix switcher, is specially used for switching and distributing the computer display signal (i.e., RBGHV signal), and can switch and transmit multiple signals from the input channel to any channel in the output channel, and the output channels are independent of each other. To put it bluntly, a VGA crossover is one computer that can be displayed on several monitors simultaneously.

Hardware is very important in the process of connecting two displays. But when it comes to software, we need to pay extra attention to it as well. Before connecting, it is best to upgrade the driver of the graphics card so that we can turn on the "multi-screen" input function.

In fact, this method can also be applied to LCD TVs, because LCD TVs also have VGA and HDMI interfaces, therefore, we can also use LCD TVs as a second screen.

Here's how to connect two monitors to one console:

The premise is that the computer must support dual outputs, that is, there is a VGA interface and an HDMI interface (can also be a DVI interface):

1. Find the external interface on the computer, and use the computer and monitor connection cable to connect the computer to the monitor.

2. After connecting, right-click on the desktop and select the screen resolution.

3. After entering, there are options such as expansion and replication in the multi-monitor option. Extended means that only the desktop background is the same for both screens; Duplication means that both monitors have exactly the same picture. After selecting according to your needs, click OK to save, and finally click Apply.

4. After the setting is completed, swipe the desktop mouse to the left to open the No. 1 display, and swipe to the right to open the No. 2 display, and then you can operate according to your needs.

As long as the software connection cable is this, you have to debug the two software and the two monitors consistently, and then connect them with the dedicated data cable, and the two monitors will display the same picture, which is equivalent to a splitter.

1. The computer is a dual-head graphics card, connect the two monitors with the computer with a special cable (such as a VGA cable directly or through an adapter), and open the computer into the graphics card control panel to set the dual-screen display copy mode. This allows two monitors to display the content on the computer at the same time. 2. If you want two monitors to be operated independently like two computers, you have to use computer doppelganger software to make one computer into multiple computers.

The software can realize that many people share a host resource, and independent of each other, in short, a host, multiple monitors, mice, keyboard.

Not to mention desktops, even if the notebook supports connecting two monitors, basically just connect it, and then set the type in the graphics card control panel, whether it is an extended display, that is, two screens display different types of capacity, or copy, the two screens display the same thing, all up to you.

The setting method depends on whether your card is a card, N card or Intel integrated display, all of which are different.

It's okay to buy a VGA splitter, there are two points, four points of one point, eight points and even more, and you can buy as many monitors as you want to connect at the same time. Then, connect the host to the entrance of the VGA splitter, and connect the output ports of the VGA splitter to your respective monitors, and you're good to go. Nothing difficult.

1. As long as the network card of the computer is not integrated, there will generally be at least two interfaces, except for a line corresponding to your computer monitor, and then find a cable and display that matches the other port.

2. To use the distributor, you need an additional distributor and two VGA cables, which can be directly displayed when connected.

The two ports of the graphics card are connected to two monitors, and the expansion or replication mode can be set in the display properties.

If you need more advanced functions, add a set of keyboard and mouse with betwin or aster tow machine to realize a computer into two, each doing its own thing, it is very practical to not interfere with each other, my current computer can achieve one to four.

If there is a corresponding external interface, it can be realized.

1.Connect the VGA port and HDMI port (or DVI port) of the computer to one monitor each, and turn on the power switches of the two monitors after they are connected.

2.After connecting, the computer is turned on to enter the system, then right-click on the desktop to enter the screen resolution interface, select "Extend these displays" in the multi-screen display drop-down menu and click OK.

3.Once you've clicked OK, you're ready to set up the extended display so that the two screens can display content separately!

Generally, there are two display situations for external notebooks when they are turned on: 1. Only the notebook is displayed; 2. Both the notebook and the external display are displayed (the external display has been connected before); There is no situation where only the external connection is displayed when the computer is turned on, and the laptop screen is not displayed. If you just want him to show the add-in, you can only do so by toggling.

This is normal, it is not possible to achieve "only display the external main display", it is recommended to switch manually.

As long as you have two output ports on your laptop, you'll be fine.

Connect the two monitors directly, and then set up the main and secondary monitors through the laptop system.

Absolutely. There's a little machine that signals 2 to 3. Comes plugged in.

Centralized display and independent display can not be used at the same time, even if the group firefight, it can only be output by the main card, it is recommended that you plug the display into the independent display to achieve the splicing effect If you display the same picture, you need a crossover You go to the computer city to ask the computer who sells computers.

1. Prepare a graphics card, there must be two or more different interfaces on the graphics card, because you want to connect two monitors, the graphics card is required to have HDMI interface and VGA interface;

2. Then you need a monitor with HDMI and VGA interfaces, so that you can go to the next step;

3. Then use a cable to connect the connection port of the graphics card and the computer monitor, and you can enter the computer system after the connection is successful;

4. On the computer desktop, right-click the mouse, select the "Screen Resolution" option, and in the screen resolution dialog box, set it according to your needs, such as requiring the two screens to display different content, and select "Expand these displays" in the "Multi-Monitor" tab;

5. When switching the display mode, you can use the shortcut "win+p", so that the setting interface will pop up, then click "extend", and finally click OK, so that you can connect one computer to two monitors.

Note: When a computer is connected to two monitors to achieve dual-screen display, try to use digital interfaces such as HDMI, DVI, DP, etc., so that the display effect will be better.

If you display the same thing, you don't need to buy another graphics card, you can buy a crossover, one drag two, one drag n, it doesn't take much money, you can use as many monitors as you want,

Yes, after connecting to the monitor at the same time, right-click the mouse on the desktop, select Properties, the settings inside, and in the screen that comes out, select the extended desktop, or display it at the same time, and click OK.