How to take a good picture of a landscape, how to take a good landscape photo

Landscape or commercial? This is very exquisite.。。。 Commercial films should highlight the selling point, and they should be shot as exquisitely as possible, or be pretentious. Landscapes are a different category.

The most important thing for landscape films is to have high sharpness, large depth of field, accurate color, and large dynamics.

Composition aside, it is important to have a good head, sharpness is important, and the edges must not drop too much. The depth of field should be large, so try to choose a hyperfocal point, and try to choose the aperture segment with the best image quality (although there are statements about the depth of field landscape 16, about the ** sun 16, etc.), but I think 16 has actually entered the image quality degradation section (of course, the effect of the corners will be better), and the overall average image quality is decreasing, so I usually am between 10-14. Remove any filters that can be removed.

Unless you pursue special effects, you can remove the sky and CPL and shoot it on a shelf. **, If you don't have a light meter, it's best to try a few more. Because although it can be post-production, it is not as good as shooting directly.

Regarding color, a slight underexposure can increase the saturation of color, so landscapes can be -1 3ev. In terms of dynamics, one is to use CPL, and the other is HDRI, but HDR is a post-production technology, and it involves the problem of ghosting when superimposed, so it is better to produce the scenery directly.

First change the canvas size to the size you want, and then import the two ** separately Adjust the position You can take two good photos, preferably the kind that is cut from the middle, that is, one large one is cut into two.

Take a picture of a place you like, beautify it with the Meitu App, and print it out with a printer.

Probably not good because I'm just a kid.

If you are using a Huawei phone, you can shoot in Pro mode, which allows you to freely adjust parameters such as ISO sensitivity, focus method, and more.

2.You can set the following parameters:

1) Adjust the metering method: Tap M to select the metering method.

2) Adjust ISO sensitivity: Tap ISO and slide the ISO adjustment area.

When light is low, ISO sensitivity can be increased; When there's enough light, you can reduce the ISO sensitivity to avoid excessive noise in the image.

3) Adjust the shutter speed: Tap S to slide the shutter speed adjustment area.

The shutter speed will affect the amount of light entering the camera, and the shutter speed can be adjusted to a lower level when shooting still landscapes and portraits; When shooting moving landscapes and portraits, the shutter speed can be adjusted higher.

4) Adjust ** compensation value: Tap EV· and slide the EV adjustment area.

When the light is low, the EV value can be turned up; When the light is strong, turn down the EV value.

5. Adjust focus: Tap AF· to select the focus mode.

6) Adjust the color tone: Tap wb· to select white balance.

If in daylight, you can select the sun icon; On a cloudy or dark day, select the rain icon.

Tap the color temperature icon to change the color temperature to give the image a cooler or warmer tone.

7) Adjust the storage format: The professional mode provides you with two image formats, jpg and raw. Click on the jpg icon at the top of the viewfinder and select a different storage format.

The RAW format retains more details and is convenient for post-processing, but takes up more storage space; The jpg format** takes up relatively little storage space, so you can choose according to your needs.

If you select the RAW format, when you take a photo, the phone will automatically save a normal format and a RAW format**, and the RAW format ** will be saved in the RAW album in the gallery.

8) Turn on the AF Assist Light: To focus in a low-light environment, tap the AF Assist icon to turn on the AF Assist Light.

3.Click the shutter to take a photo.

The camera is flat and the horizontal line should not be crooked.

When shooting scenery, the camera should be flat, the horizontal line should not be crooked, and the horizontal line can be placed in the middle of the **, so that the upper part is the entity, and the lower part is the reflection, which is more three-dimensional.

Scenery refers to the natural scenery and scenery for viewing, including natural landscapes and cultural landscapes. Landscape is a kind of scene that is revealed by the reflection of light on things. It has a wide range of meanings, such as scenery or scenery, scenery, etc.

In ancient Chinese books, especially in terms of poetry and writing of pure literary and artistic works, it has been used for a long time, and it is almost integrated with tourism. Moreover, a large part of the works are lyrical and allegorical in the scene.

1. Choose a good theme. If the theme is to shoot the scenery of the mountain, it is necessary to shoot the characteristics of the mountain, shoot the layering of the mountain, choose the composition of the picture, and let the color and literature firmly catch your eye, so that it is easy to shoot a good scenery.

2. The effect of the times. Make full use of the effect of the season, such as in the foggy weather, you can make good use of the weather at that time, and shoot the majestic mountains, seas, waterfalls, etc., to set off the grandeur of the scenery.

3. Choose a good angle. Shoot a sense of landscape extension, but also pay attention to the use of light, into the characters can contrast the real size of the building, so that people have a sense of immersion, and the shooting is more vivid.

4. The composition should be clean. Pay attention to the details of the photo, and use your own vision to capture the spirit animals in the scenery, such as seagulls in the sea, hot air balloons in the wilderness, and contrast the sky picture with a sense of infinity and vastness.

5. Make good use of the reflection. Enhance the beauty of the picture, eliminate the effect of simplicity and monotony of the picture, make good use of the natural symmetry, enhance the sense of depth, and at the same time choose a good horizontal composition so that its reflection is not tilted.

When it comes to accurate color representation and reproduction, the standards for advertising and product photography are stricter than in any other photography category. What are your tips for photographing landscapes? The following is the relevant content I shared, welcome to read, just for reference!

Multi-zone metering

The picture is divided into multiple areas, each of which uses an independent metering element for metering, and then the internal microprocessor averages the amount of light.

**Emphasis on average metering

Cameras typically focus on metering the frame** (about 60% of the frame) while taking into account the edges of the frame.

Partial (**partial) metering

The camera's metering element measures an area of about 12% of the frame in the center of the frame, and finally averages the weighting to obtain the metering data.

Spot metering

The metering element measures a very small area in the center of the screen from 1% to 3% for metering.

a Multi-zone metering.

The advantage of this metering method is that it can accurately determine the scene environment'Average light**, which is the **mode that most junior movie lovers prefer to choose.

b **Emphasis on average metering.

When there is high contrast or very different colors in the frame, the camera will metering multiple areas and emphasize the focus of metering on one area according to the needs of the photographer.

c Partial (**partial) metering.

This metering mode is ideal for landscapes** where the subject is in the center of the frame and the subject is very different from the background.

d-spot metering.

This metering mode is mostly used when the photographer wants to fully represent the subject, in other words, "measure whoever you want to stand out".

Observe the blue sky

Use the key or matrix metering to read the value of the sky, and follow it to shoot the morning sun, sunset, scenery under the snow on a sunny day, dusk and night scenes, etc. The biggest trouble when shooting is to pay attention to the interference of the sun in the frame. This requires pointing the lens at the side of the sun, which does not include the sun, and reading the value.

But there is a contraindication to this method: cloudy days. Don't read the overcast sky, that won't be a good shot.

Pay attention to flowers and trees

Encounter waterfalls in the forest and overcast fields. **The key metering method frames the whole picture with greenery, reads the value, and then does -2 3 stops (normal green) to file (dark green) compensation, which is the correct **value.

Make use of the palm of your hand

When you can't get the ** value, under the same light conditions, stretch out your palm, fill the palm of your hand with the whole picture or close to filling the whole picture, read the data with **key metering, and then make some **compensation according to the actual effect, that is, your **data.

Don't underexpose the portrait, don't overexpose the scenery

Landscape photography mainly emphasizes the level of shadow tone, and has a high tolerance for the overall noise of the picture, so as long as there is no highlight whitewashing in the early stage, you can get rich layers, bright colors, and moderate noise landscape photos through adjustment and modification in the later stage. The principle of photometering of cameras (digital and various films) is not complicated, and the most important thing is to understand what the photometering system (or light meter) of the camera is based on! In layman's terms, when a camera is measuring the light of a scene, how does it "think" about what it sees?