How about the CNC cutting machine system made by ARM?

I haven't heard of Koike acid, Boda, Hualian, Shanghai GM, Shanghai Jinfeng, Harbin Electric Group and some other large high-grade cutting machine manufacturers with ARM CNC system, if there is really such a big advantage, it has long been adopted by large cutting machine manufacturers, I only know that the cost of ARM machine is particularly low, the profit is particularly high, followed by the function has a lot of limitations, can only be improvised, according to the industrial control computer system is far worse, do not look at some of the manufacturer's explanation terms, the people do not understand, is fooled, If you analyze it carefully, you will figure it out.

Make a small portable or improvised, you can use the arm system, and after a year or two (that's good), you will be scrapped, and you can't repair it, you have to replace it with a new one, and that's what my friend did.

I am a cutting machine equipment, we are basically using ARM systems now, from a practical point of view, I will always use ARM systems, if from the high-end I will choose industrial computers.

The ARM9 system we are using now has no problem with plasma directly with 2 Hitherm MAX200s, which I quite appreciate.

The cost of ARM is relatively low, the profit is relatively high, and it is not suitable for large-scale gantry. The best is the industrial control model for large gantry cutting machine, the industrial computer is a real computer, that is to say, there is a CPU, at present, the system of Stadt, the public is all ARM machine, there is no CPU, so those who know how to know at a glance, some are even arm7, far worse than the industrial computer, ARM can also make do, but it can only be improvised.

At present, the more popular ones in the industry are the numerical control systems of the United States Hypertherm and Shanghai Jiaotong University Fangling, which are all industrial control computers, that is, industrial control models. It is suitable for large-scale CNC cutting industrial control system. Now Shanghai Fangling's CNC system is operating under Windows XP, which can be networked in the local area and install some other auxiliary software (it still depends on the customer's wishes), so it is still more practical and humanized.

It's okay to be small and portable, but it's best not to use it on a gantry. The system is a simple numerical control system.

Personally, I think Start is too immature in doing the system, our factory recently changed this system, it feels very inconvenient to use, the operation interface they provide is too inhumane, often vertical width with several operation buttons concentrated together, can only be operated with one hand, just like people learn computers, at the beginning they like to use one hand to play the keyboard, boring for a long time, learned, no one uses one hand anymore, so it feels that one hand operation is always inconvenient. I hope they can learn the system of Fagor, the original Fagor 8025 is very easy to operate. In addition, its system does not have a graphical presentation function, and can only be demonstrated by dry running, which is also the Achilles heel of its trapped fiber bend.

Xuzhou Haibo CNC Technology Co., Ltd. is a comprehensive technology company integrating independent research and development and production, manufacturing, sales and after-sales. With first-class quality and perfect after-sales service, the company is ahead of the CNC cutting machine manufacturers in the same industry in the national register, and is unique in the domestic cutting machine industry. The company takes customer first, integrity first as its purpose, and sincerely welcomes new and old customers to visit and guide the company!

Identification is complete, pure advertising! Be vigilant so as not to be deceived!

Wuxi Zhouxiang according to this system of loss wide acres, it is more spicy, not easy to break, the program is simple and easy to understand, others such as the United States Pony is not good, the operation is simple, but its nesting oak software is not very general, and the domestic use of this system is not sold more, each other can not learn from each other operating technology.

It's better than Haibao's, I didn't mention it, it's interesting, hehe, a world-class brand, it's awesome!

For this technical question, it is recommended that you search for naibacnc

That's what you said, the variety is messy, most of the current CNC cutting machine manufacturers are purchased to assemble CNC systems, guide rails, motor drives, arc voltage adjustment and other devices, and then sell them out of the factory.

From the current market, it can be divided into 1 portable CNC cutting machine, which is commonly known as the little bee. It is suitable for cutting steel plate materials in small steel structure enterprises.

2. Economical gantry cutting machine: the general span is less than 4 meters, most of them use single drive, the configuration is relatively simple, the price is not high, this is also a cutting machine with Chinese characteristics, originated after the economic crisis, suitable for simple steel structure cutting.

3. Large gantry cutting machine: refers to a large gantry cutting machine with a span of more than 4 meters, the cutting machine is generally equipped with an industrial control computer as the control host, Panasonic's motor and drive, high-quality guide rail and arc voltage height adjustment device, suitable for large shipbuilding enterprises and steel structure enterprises, some spans can reach more than 12 meters, plasma flame dual configuration.

When purchasing and differentiating the advantages and disadvantages of cutting machines, it mainly looks at:

1 CNC system: it is best to use the industrial control computer system, at present, the foreign industrial computer system is common is the United States Hypertherm system, the most expensive, the follow-up after-sales cost is higher, followed by the domestic Shanghai Jiaotong University Fangling CNC system, the current Shanghai Jiaotong University Fangling CNC system has industrial control computer and common arm machine two kinds (domestic X, Zhongxxing are arm), the industrial control computer system is relatively low, the function and operation is close to the Haibao system, the current Boda, Hualian, Shanghai General Motors, Koike Acid, Cirrus Heavy Industries, etc. are all OEM made by Shanghai Jiaotong University Fangling CNC system.

Other systems in China, are arm, the so-called arm, is a single-chip microcomputer, no CPU, can not run Windows operating system, the simple distinction is to see whether the system can run Windows-XP system.

2 Motor and drive: It is recommended to purchase Panasonic's motor and drive cutting machine, and the current other configurations are really not complimentary.

3. Plasma power supply: It is recommended to use foreign plasma power supply, and the rest will be known by using it.

CNC cutting machines are divided into many kinds, there are portable CNC cutting machines, desktop CNC cutting machines, gantry CNC cutting machines, etc., there are many parameters, ** interval is also very large, you first have to know how thick the steel you need to cut, and then choose the plasma power supply according to the thickness of your cutting, followed by you need to understand what the span you want is, so as not to buy equipment can not be put down, for example, if you want to portable CNC cutting machine basic size in 1500*3000mm, portable this thing is very simple, Generally speaking, it is done well, generally speaking, Huayuan's power supply is recommended, the cutting quality is very good, if you need the gantry, then you need to see how the quality of the gantry equipment is, some of the equipment is very poor, **cheap, some**slightly higher but the quality is very good, in this case, you have to think about it, because the kind of equipment that looks cheaper often plays with customer psychology.

Generally, some customers start to have problems after using it for about a year.

But under the same configuration of good equipment, it seems to be more expensive, but it can be at least seven or eight years, and there are few problems, high precision, you can save a lot of maintenance costs, in fact, the same situation as the car, everyone understands, +VXH involves a lot of parameters weichangshun3000, in addition to the transformation of CNC equipment is also a good choice, generally in the case of wanting to save costs, it can meet the needs of equipment use, and does not need to spend more money to buy equipment, which is very cost-effective.

This depends on whether there is a problem with the PLC parameters or a lost step, move a meter away to see how much it is different, and then move another meter to see if it is the same amount for each meter walked, if it is a PLC setting problem.