-
Anonymous users2024-02-07We have not been in the countryside for a long time to install tap water, after sticking the card, you can use water, but a few days later there is no water, how to find a water card, the water meter does not reflect that the card can not be pasted at all, experts, what should we do?
-
Anonymous users2024-02-06Summary. There are the following reasons:
1. The front valve of the water meter inlet is not opened, you can manually open the front valve of the water meter to try, if there is still no water, then you need to find the relevant departments for the following detailed testing.
2. Whether the filter screen is blocked, if there is a foreign object, clean the filter screen of the faucet, and try whether the water is normal after installation.
3. The IC card smart water meter is interfered with by magnetic substances, once the IC card smart water meter senses the attack of magnetic substances, it will send a water cut signal to prompt the water meter to be attacked, at this time, it is necessary to find out the interference source and keep the interference source away from the water meter.
The IC card smart water meter shows that there is water, but the water cannot be released, what are the reasons.
There are the following reasons: 1. The front valve of the water meter inlet is not opened, you can manually open the front valve of the water meter to try, if there is still no water, then you need to find the relevant departments for the following detailed testing. 2. Whether there is a blockage in the filter source sales network, if there is a foreign object, clean up the filter filter of the faucet, and try whether the water is normal after installation.
3. The IC card smart water meter is interfered by magnetic substances, once the IC card smart water meter senses the attack of magnetic substances, it will send a water cut signal, indicating that the celery or water meter is attacked, at this time, it is necessary to find out the interference source and keep the interference source away from the water meter.
When the battery power of the IC card smart water meter is too low, the water meter will send out a relative alarm, and stop the water supply while closing the valve. 5. The remaining water fee of the IC card smart water meter is too low, under normal circumstances, after the installation of the water meter, a predetermined value will be set for it in advance, and when the remaining value is lower than this preset value, an alarm warning will be issued to stop the water resources and warn the user that the water fee is too low. 6. If the IC card smart water meter fails, when the IC card smart water meter fails, the electronic display screen will have a relative error, and it needs to be dealt with accordingly according to the prompts.
The water card has just been paid.
The water meter shows the amount of water remaining.
The water meter shows both the amount of water used and the amount of water remaining after the IC card is recharged. Generally speaking, the cubic meter should be the total amount of water used from the installation to the present, and the remaining amount of the bridge lease is displayed. Water meter, generally divided into two types of volumetric water meter and speed water meter, originated in the United Kingdom, the development of water meter has a history of nearly 200 years, when choosing the size of the water meter, you should first estimate the size and flow range of the flow rate normally used, and then choose the water meter of the type of specification that is closest to the value of the commonly used Li trillion flow as the first choice.
However, the table also shows OFF
Indicates that there may be a problem with the water meter circuit board, and the tin system is disturbed due to moisture. You try to re-swipe the card, if it still doesn't work, you have to find an after-sales service for repair.
There is a sound every time you swipe the card.
It just doesn't come out of the water.
Someone has to come and take a look.
-
Anonymous users2024-02-05The smart IC card water meter screen doesn't show numbers anymore, but there are two reasons why there is water:
1. The smart IC card water meter screen does not display numbers, but there is water, the water meter battery is dead, just replace the battery.
2. LCD screen.
If the electronic part is damaged, the user can transfer the IC card.
The smart water meter is repaired by the property or water management department or water meter manufacturer.
-
Anonymous users2024-02-04Summary. Hello, I have found the reason why the smart water meter shows the wrong card for you.
1.It is the reaction after the alarm, look at the remaining water or the symbol of the battery, generally after these two alarms, there will be a situation of closing the valve.
2.The wrong card may be the wrong way to insert the card, that is, the chip is not aligned, or it may not be this card. When the card is inserted into the meter body, no matter which way, the water meter will self-test to close the valve after the alarm is ruled out, so the words "stuck wrong, the valve opens" appears.
I hope my answer will help you and have a great day.
What's going on with the smart water meter showing the wrong card.
Please wait patiently for 3 minutes, we are sorting out, and we will answer you immediately, and please do not end the consultation.
Hello, for you to find the reason for the smart water meter display card error 1It is the reaction after the alarm, look at the remaining water or the symbol of the battery, generally after these two alarms, there will be a situation of closing the valve. 2.
The wrong card may be the wrong way to insert the card, that is, the chip is not aligned, or it may not be this card. When the card is inserted into the meter body, no matter which way, the water meter will self-test to close the valve after the alarm is ruled out, so the words "stuck wrong, the valve opens" appears. I hope my answer will help you and have a great day.
His current situation is that the valve is closed by the wrong one, and he has been charged for an afternoon, or this is the case, what will be the problem.
Cause of failure and solution: 1. When the battery voltage is lower, the electromechanical valve will be closed and the "undervoltage" and "closed valve" will be displayed. Workaround:
A new battery is required to be reused. 2. The card is reversed or the card is not inserted into the system. Workaround:
To check that the card is correct, simply reinsert the card in reverse.
-
Anonymous users2024-02-03The smart IC card water meter looks directly at the LCD screen.
There is a numerical display on it, which is the specific amount of water used.
When the user of the smart IC card water meter uses water, the water quantity collection device begins to collect the water consumption, and converts it into the required electronic signal to supply the microcomputer module for measurement, and displays it on the LCD display and scattering module.
When the user's water consumption amount drops to a certain value, the microcomputer module will give an audible alarm, prompting the user to pay the card to purchase water. If the amount of water consumption is exceeded, the microcomputer module will automatically close the electronic control valve and cut off the water supply. Until the user inserts the IC card that has already paid the fee.
The sheet restarted opening the valve for water supply.
-
Anonymous users2024-02-021. The battery is dead: In order to save electricity, the water meter is generally not displayed. Insert the traveler into the IC card.
If the water meter does not have these functions, the first thing to consider is that the water meter is out of power, and you need to go to the property or water meter manufacturer to replace the battery.
2. The LCD part is broken: If it is not the problem that the water meter is out of power, it may be that the electronic part of the liquid crystal display is damaged. Users can bring the IC card smart water meter to the property or water management department or water meter manufacturer for maintenance.
The mechanical part of the water meter can be read.
Determine if the water meter needs to replace the battery.
1. The electronic display part of the water meter does not display the water meter number, and the water meter sends out an alarm sound, indicating that the water meter battery is out of power at this time and the water meter battery needs to be replaced.
2. When the pre-stored water of the water meter is used up, the water meter has not closed the valve, resulting in the water flowing out of the water meter. In this case, the battery of the water meter is dead.
3. When the water meter count is found to be inaccurate, it may be that the water meter battery is dead, or it may be that the IC card smart water meter is broken.
4. Low voltage detection: when the battery voltage is lower, the motor valve is closed and displayed. The valve will close. In this case, you need to install a new battery in order to repeatedly remove and dismantle the water meter with the IC card.
There are two ways to recharge your natural gas IC card.
Method 1: Top up at the payment point set up by the gas company. >>>More
Convenient, if the version of the IC card is higher, you can realize the card to go directly to the resident's destination floor, and the mobile phone card can be swiped. >>>More
The most authoritative way to query.
1. The current electrician certificate is like the second-generation ID card, which can be illuminated with a strong photonic microlight chip. >>>More
It's not as hard to beat this level as you think, and as long as you learn to hit the critical hit, it's easy to beat it. First of all, let's talk about the fatal blow I learned. When fighting the boss, he has 2 bars, the top is the blood bar, the bottom is the anger bar, the blood is very slow to be knocked out directly, when the anger groove is full, the opponent will be angry, when you see that his head has a yellow halo, it means that he is angry, this is what you have to hold down the right mouse button (lock the opponent), wait, when the opponent rushes towards you, close to you, the screen becomes blurry, grasp this time (that is, the bullet time is often said), press any arrow key + shift (such as a + shift left down), At this time, Laura's movements slowed down, and there were 2 shooting halos moving towards the opponent's head, don't worry, wait until the 2 apertures turn red together, shoot, and the opponent will be stunned, and lose a lot of blood, (don't let go of the right button to lock during the whole process, I won't be this at the time, I was abused by the old dinosaur.) >>>More
But you can get stuck in, but I'm afraid of the mistake of the card**. The bug is sealed.,If you insist on learning.,Then I'll tell you.,The verbal expression may not be comprehensive.,If you don't understand it here, then you have to go and see**.。 First of all, you go to a protruding wall, you will see if there is a stone made of cement under the wall, look closely, the irregular cement stone, he is just perpendicular to the wall, you will see there, the middle line of cement and the wall, you will see the longest line, just here with your back to the wall, keep pressing the back button and then feel a little stuck, a lifelong jump, the back button is still not put, the card is successful, you have to react quickly, and then instantly let go of the retreat, because, behind is the cliff, as soon as you fall into it, you will hexagram, so you have to master it, when the time comes, you will find that there is a cliff on one side of the ground, and then before you have time to be at the junction of the cliff and the ground, you are wrong**. >>>More