How can you boost the signal of the wireless network

Here's how to increase the wireless signal:

1. Position the wireless router reasonably.

Since the wireless signal is greatly attenuated after crossing obstacles, especially through metal. In most homes, there are a lot of reinforced concrete walls, so when placing a wireless router, you should make sure that the signal passes through the wall as little as possible.

The average person rarely surfs the Internet in the kitchen or dining room, and the study and bedroom are places where we usually surf the Internet, so when choosing the location of the wireless router, you can choose to be far away from the kitchen and dining room, and try to be as close to the study and bedroom as possible.

2. Modify the signal channel to reduce interference.

In the configuration interface of the wireless router, you will see the option of wireless channel. Generally speaking, there are 11 wireless channels of 54m, which are channel 1 to channel 11. Signal interference occurs when multiple wireless signals are using the same wireless signal channel.

3. Extend the antenna to enhance the signal.

Since the size of the antenna gain directly affects the transmission strength and reception ability of the signal, and the antenna of some routers on the market adopts a detachable design, it is the most direct way to enhance the signal by replacing a high-gain antenna for the wireless router. There are a lot of gain antennas on the market, and they are also cheap. However, it is worth noting that when purchasing, you should ask whether it is an omnidirectional antenna, otherwise you can only transmit wireless signals in one direction with a directional antenna.

1. Change the channel, see if there are many channels of nearby users, for example, these few occupy more than 2 If the distance is long, you can consider using an amplifier, if the wall is thick or the metal object changes the position, you can consider multi-route expansion.

3. Change the position, and the route is best placed in a slightly higher place without obstruction.

Represents personal advice only.

Here's how you can boost your WiFi signal:

1. Update your WiFi device.

2. Set the best channel:

1) Log in to the router's management page;

2) Click "Basic Settings", change the "Default Channel", and select another better channel.

3. Adjust the position:

1) a central location in the home;

2) Keep away from interfering equipment;

3) Reasonable placement of antennas.

Fourth, prevent the outside from rubbing the net.

Fifth, the installation of auxiliary settings.

Use a can to cut a parabolic reflective surface and put it on the antenna of the router.

You can use a wifi extender, 360wifi extender is good, it can solve the problems of poor local wifi signal and slow Internet access due to signal dead ends, house types, walls and other reasons. With an external independent antenna and simple configuration, it is compatible with mainstream routers on the market.

No matter how many ways you find, it's better to buy a better wireless router, which is king.

If the range is large, it is to buy a few more wireless routers, one as the main one, and the other as an auxiliary for the signal transmission amplification function, so that you can buy router satellites directly to save money, and mainstream manufacturers have them. If you don't want to spend money, you can use cans or something to do some processing yourself, and you can find out the specific operation.

One pot is done! Just prop the pan up towards the position where you want the signal to be strong.

No, the software on the Internet is all deceitful, and the signal strength is directly related to the internal configuration of the fuselage.

Signal amplifier one. Be the kind of seamless connection. That's it. Just put it on the socket.

1. The closer to the signal source, the stronger the signal, if your own technology can, you can DIY and add an antenna;

2. There is another way, buy a new wireless network card, and ask for the one with the farthest distance between indoor and outdoor.

3. Or add signal amplifier. However, it is not recommended to add an amplifier, because after all, increasing the power increases the radiation, and it is better to be careful in the home environment.

4. Replace the wireless router, preferably the one with many external antennas.

Replacing a more powerful router is the most straightforward and effective way to do this.

The second is to add a signal extension device (I forgot the name, the kind that plugs directly into the socket) where the signal is needed

Again, find a way to wrap a curved piece of metal around the router, and open the mouth in the direction you want the signal to have a slight effect.

Go online and buy a wifi booster, or wirelessly bridge multiple unlimited routers and you'll be fine.

** Find those signal amplifiers.

Switch to a router with enhanced traversal type.

You can only switch to a more powerful router.

Increase the power of the device and adjust the power to the maximum.

Optimizing the channel used by the device can increase the transmission rate.

You use a can to cut off the bottom cover and the top cover, cut the side again, pull the net flat, and then put it on two or four signal sticks on the wifi, which can expand the signal.

There's no way, the rated power of the network card is just that, and no matter how strong it is, it will never be connected to the satellite. The NIC signal mainly depends on the signal base station, and if there is no base station in the location, it will not work. The power of rubbing the network card is large, but the radiation to the human body is also large.

Find an aluminum can, cut off the bottom, and cut it from the bottom to the middle of the top to create a divergent shape. Insert the antenna of the wireless signal through the mouth of the can and adjust the position of the can.