There are ABS explosion proof death, why cheap cars can t brake

First of all, you need to have an understanding of the ABS concept.

Anti-lock braking refers to emergency braking to prevent the brake disc and brake pads from locking, resulting in a side-slip rollover.

Theoretical and practical tests, with and without ABS, in the specified environment, the braking distance with ABS is longer than that without ABS.

It has a lot to do with tires.

It's not that it's soft, it's that the frequency of braking is low.

When ABS works, it is equivalent to a very high frequency of point brake, so in an emergency to press the brake pedal, you will definitely feel the brake pedal is shaking, and at the same time, you will hear the "click" sound from the brake master cylinder, which is ABS is working normally. Since the brake master cylinder is constantly adjusting the brake pressure, there is a continuous feedback force on the brake pedal.

Therefore, in this case, it is necessary to "unwaveringly" press the brake pedal and at the same time take active measures to avoid danger.

Note that the ABS system itself has limitations, and it still can't get rid of certain physical laws. In both cases, the ABS system does not provide the shortest braking distance. One is on smooth trunk roads, where the brakes are applied directly by an experienced driver.

Another scenario is braking on loose gravel roads, loose dirt roads, or roads with deep snow.

In addition, usually on dry roads, the latest ABS systems can control the slip rate in the range of 5%-20%, but not all ABS brakes at the same rate or to the same extent.

1. You can force the start and slam the throttle, as long as the rear wheel moves, it's OK; 2. You can also remove the tires, and knock the brake drum twice with a hammer according to the liquid brake drum to loosen the joint surface of the brake drum and the brake pad.

ABS is a braking anti-lock braking system, which controls the size of the braking force when the vehicle is braking, so that the wheels do not lock, ensure the steering ability of the vehicle, and avoid accidents. When ABS is working, the brake is very similar to the point brake, when the tire has a greater friction mold force, to achieve better communication effect, prolong the service life of the brake pad, especially in the rainy season, the effect is more obvious.

Car ABS does not need to be opened separately, ABS is no switch on the vehicle, as long as the tire is in a locked state, ABS will work, now the production of models, most of them are matched with ABS function, can effectively ensure the safety of the vehicle, reduce the occurrence of accidents.

Hello, you will be locked, and completely clinging to the empty wheels may lead to the occurrence of some dangerous phenomena. The situation of the front wheels locking will cause the vehicle to lose the ability to steer, this is because the front wheels are steering wheels, at this time, the vehicle will slide forward by inertia, which can easily lead to some accidents. If the rear wheel is locked, there may be a phenomenon of side skidding, which is very dangerous, especially on the road surface in rain and snow, this point should be noted, so when braking, try to point to the blind to avoid emergency blind repentance, and the possible danger in time.

1. ABS locking may be caused by factors such as the stagnation of the leather bowl of the brake master cylinder and the non-return, the insufficient stiffness of the brake disc, the unreasonable coordination of the brake pads, or the poor coordination of the internal parts of the rear brake;

2. ABS is an anti-lock braking system, which is used in automobiles, which can avoid the loss of control of the vehicle and generally reduce the braking distance to improve the safety of the vehicle.

3. The vehicle is equipped with ABS anti-lock braking system, which can avoid the loss of direction and wheel slippage during emergency braking, so that the wheels are not locked when braking, and the tires are not allowed to rub against the ground at one point, so as to increase the friction and make the braking efficiency reach more than 90%, and at the same time, it can also reduce brake consumption and extend the service life of brake drums, discs and tires twice;

4. ABS can quickly judge the locking state of the wheel according to the speed signal transmitted by each wheel speed sensor, close the normally open input solenoid valve on the wheel that begins to lock, so that the braking force remains unchanged, if the wheel continues to lock, then open the normally closed output solenoid valve, the braking pressure on the wheel moves down rapidly due to the pipeline that goes straight through the brake fluid reservoir, preventing the wheel from being completely locked due to excessive braking force.

Millions of car purchase subsidies.

Reasons for ABS locking of the car: 1. ABS locking may be caused by the lag of the leather bowl of the brake master cylinder and the non-return, the insufficient stiffness of the brake disc, the unreasonable coordination of the brake pads, or the poor coordination of the internal parts of the rear brake; 2. ABS is an anti-lock braking system, which is used in automobiles, which can avoid the loss of control of the vehicle and generally reduce the braking distance to improve the safety of the vehicle. 3. The ABS anti-lock braking system is installed on the vehicle service pin, which can avoid the loss of direction and wheel slippage during emergency braking, so that the wheels are not locked when braking, and the tires are not allowed to rub against the ground at one point, so as to increase the friction and make the braking efficiency reach more than 90%, and at the same time, it can also reduce brake consumption and prolong the service life of brake wheel drums, discs and wheel collapse tires twice; 4. ABS can quickly judge the locking state of the wheel according to the speed signal transmitted by each wheel speed sensor, close the normally open input solenoid valve on the wheel that starts to lock, so that the braking force remains unchanged, if the wheel continues to lock, then open the normally closed output solenoid valve, the braking pressure on the wheel moves down rapidly due to the pipeline that goes straight through the brake fluid reservoir, preventing the wheel from being completely locked due to excessive braking force.

What is car abs locked? Reasons for ABS locking of the car: 1. ABS locking may be caused by the lag of the leather bowl of the brake master cylinder and the non-return, the insufficient stiffness of the brake disc, the unreasonable coordination of the brake pads, or the poor coordination of the internal parts of the rear brake; 2. ABS is an anti-lock braking impulse system, which is used in automobiles, which can avoid the loss of control of the vehicle and generally reduce the braking distance to improve the safety of the vehicle; 3. The vehicle is equipped with ABS anti-lock braking system, which can avoid the loss of direction and wheel slippage during emergency braking, so that the wheels are not locked when braking, and the tires are not allowed to rub against the ground at one point, so as to increase the friction and make the braking efficiency reach more than 90%, and at the same time, it can also reduce brake consumption and extend the service life of brake drums, discs and tires twice; 4. ABS according to the speed signal transmitted by each wheel speed sensor, can quickly judge the locking state of the wheel, close the normally open input solenoid valve on the wheel that begins to lock, so that the braking force remains unchanged, if the wheel continues to lock, then open the normally closed output solenoid valve, the braking pressure on the wheel of the cavity grinding due to the appearance of the pipeline straight through the brake fluid reservoir and quickly move downward, preventing the wheel from being completely locked due to excessive braking force.

The use of ABS anti-lock braking is to press the brake plate sharply, and it is directly pressed to the end, do not let go, and at the same time use the steering wheel to control the vehicle and avoid obstacles. ABS anti-lock braking is used as a bird: 1. At present, most vehicles are equipped with ABS anti-lock braking system, but because some drivers do not master the correct use method, the vehicle ABS system can not work normally, resulting in the extension of the braking distance; 2. The most common problem is that the force when stepping on the brake pedal is too light, when the pedal is pressed hard, there will be bursts of shaking and noise due to the braking system, which makes some drivers hurriedly loosen their feet, in fact, this is the normal reaction of ABS intermittent retraction and release of braking pressure; 3. The main function of the ABS system is to prevent the wheels from locking up and losing direction, not to shorten the braking distance.