Fast Break Red Black Carbon 7 6 WRB Forehand Darker Red V Backhand 729 08 Is such a configuration ch

Updated on physical education 2024-04-23
23 answers
  1. Anonymous users2024-02-08

    The idea of not pouring glue and using internal energy to set glue is correct. But it is basically impossible to get it at one time, no matter how good the rubber is used, and your two sets of rubber are relatively low-grade rubber sets, to be honest, it is not too good with your bottom plate, hehe, when your technology rises, the knowledge of the equipment is more, and it is inevitable to change. If you have already bought these two sets of glue, it is recommended to swap the front and back glove glue.

    Darker Red V is known as imitation Zini, but the strength is much worse, and it is difficult to exert power in the forehand. Put it on the backhand, which is more suitable due to the small backhand power. Of course, it depends on the degree of rubber you buy.

    However, the Duck red V on the forehand is really a bit of a chicken threat.

    It's an old problem that some of STIGA's baseplates are easy to draw, especially without CR. In addition to some protective measures such as the protective liquid. There is also a point to pay attention to in glue and use.

    On glue, it is recommended to use organic glue. Organic glue is cheap, and the sticky type is not so big, so it is easy to tear off. In organic glue, I generally use Haifu Blue Whale 2 generation.

    It is not as sticky as 729 and other glues, and it is not as sticky as dolphins, penguins, etc.

    The general internal energy glue, especially the domestic glue, there is no problem with organic glue, and the attention is that only a thin layer can be brushed when brushing glue on the glue, and do not brush repeatedly like glue. Including some early German internal energy such as jo, F1, etc.,I've brushed them all.,It's fine.。 However, now the new cake sponge is not very daring to use the glue, very glue, worried that the filling will be broken.

    You should also be careful when removing the sleeve. Don't use too much force, and tear horizontally or diagonally. That is, tear from one side of the bottom plate to the other direction, do not tear from the head to the end or the tail to the head.

  2. Anonymous users2024-02-07

    The idea is not right, the bottom plate itself is better, it is impossible to live with the rubber for a lifetime, and it must be torn off in the end, and it must be drawn after a long time of sticking, but it is often torn off and will not be drawn, 729 08 is better used in the forehand, and the backhand Dornick F-1

  3. Anonymous users2024-02-06

    Forehand: Hurricane 2 or Hurricane 3 are very good rubber can choose one, backhand: these three butterflies 1, sriver, 2, el, 3, fx hardness 1>2>3; That"3"is better.

    Red and black carbon king is more hard and violent, with a soft rubber to slow down, more perfect mad 2 and mad 3 are very famous sticky rubber out of the ball fast spin big arc low ball thief forehand with mad three 39 degrees, backhand butterfly server fz, perfect match! Let's talk about the problem of "Little Butterfly" Sriver FX, this series has been famous for its elasticity since it came out in 69, and it can still be competitive after changing so many products, relying on the fast glue used later, it is obviously not possible to do it without filling, just like Bryce, it is a god glue when it is poured, and it is super garbage if it is not filled. So if you want to use a little butterfly, you must be like crazy 3 Don't forget to talk about the problem of "little butterfly" sriver el, this series has been famous for its elasticity since it came out in 69, and it can still be competitive after changing so many products, relying on the fast glue used later, it is obviously not possible to do it without irrigation, just like bryce, it is a god glue that is poured in, and it is super garbage if it is not irrigated.

    So be sure to pour glue like Mad 3, don't forget. Well, if you don't understand anything about this question, you can ask it, if you are satisfied, remember to adopt If you have other questions, please adopt this question and click to ask me for help, it is not easy to answer the question, please understand, thank you! (Bye!)

  4. Anonymous users2024-02-05

    Try the red and black carbon king today, forehand 05, backhand tsp raw rubber, it feels good, that's it, the golfers describe it accurately, good board.

  5. Anonymous users2024-02-04

    Forehand madness 3 is a must.,Backhand depends on your technical characteristics.,The 3 you said are very thorough.,Sriver's pulls are good.,The error tolerance rate when defending is OK.,I recommend this.。

  6. Anonymous users2024-02-03

    Stica's Red and Black Carbon King is a more violent board.

    The forehand is Hurricane 2 or Hurricane 3, and it seems that there are more forehand arcs. The rubber used for the backhand is relatively entry-level, if there is a pull ball on the backhand, choose FX, if there is a bounce, choose Sriver. But the premise is that the backhand rubber you choose needs to be poured.

    Also, the Hurricane series is recommended to be equipped with 39 or 38 degrees, or it can't be controlled.

    If you choose a jacket for your backhand, you can consider using a tall lightning hack [130 yuan] or joola's tango [135 yuan] or Min Chong [180 yuan], and the price is not high.

    **Reference: Xbao Golden Dragon Sports.

  7. Anonymous users2024-02-02

    No, the forehand should be equipped with soft rubber.

  8. Anonymous users2024-02-01

    It's no problem to do a forehand with a provincial madness 3, and it is recommended that 39 degrees is OK. There is no problem with the backhand with the Sky Wing, it is light in weight and easy to penetrate the plate.

  9. Anonymous users2024-01-31

    Forehand 729-08 47 degrees, backhand 2000F wind! The duel is easy to use!!

  10. Anonymous users2024-01-30

    The key to mass configuration is basic skills.

  11. Anonymous users2024-01-29

    The red and black carbon king is relatively hard, and the mad 3 also belongs to the hard set of rubber, which may not be easy to control, if you want to choose, you should choose a lower degree.

    If the weight can be beared, the performance is not as good as 729-2 or CJ8000.

    The forehand can be considered 729-8.

  12. Anonymous users2024-01-28

    Backhand – Focus 3, Haif White Shark, Moon, UFO, CJ8000,

  13. Anonymous users2024-01-27

    Because the specific price requirements are not clear, so I will briefly say that the cheapest, grass chicken 8000 brisk type, is not very elastic, but it is more pilling, after filling oil (I bought more Haifu oil, so I tried to fill the oil, a small luxury) The power is larger, the speed is fast, and the main thing is to see the force. Or focus 3, this is better than the grass chicken, more elastic, slightly faster than the grass chicken, but the strength is weak, it is recommended to 46 degrees, in addition to the rubber surface to keep dry, you can use a fan to blow or on the transparent plastic seal. It's better.,Zini bar.,Red and black backhand bounce is very cool.,Recommend Zini alpha,Early 100,And then up 200 yuan is definitely the best fast number or Min Chong number.,If you go up, it's Dornick Blue Fire JP03.,If you have a lot of strength, jp01,High-density cake sponge,Very durable and,The speed of the German set is really super awesome.。

  14. Anonymous users2024-01-26

    Is it a horizontal shot? How much are you going to do?

  15. Anonymous users2024-01-25

    1. Stikaki This Trapped Red and Black Carbon King WRB is a carbon wood structure, hard, and an offensive bottom plate. Not suitable for arc play. Hood.

    2. If it is a fighting idea of arc fast play, it is recommended to use Rose 5 or Ebony 5.

    Positive glove glue: Crazy.

    Three, Ni arrogant three.

    Anti-glove glue: top tango, Shiaode 2000F

  16. Anonymous users2024-01-24

    The red and black carbon king is the best choice for the near-stage fast-break style of play or the fast-break combined arc circle style of playWeight: 85 grams.

    Thickness speed: 121

    Control: 62 Layers: 7+6

    Playing style: Strong attack.

    Recommended: 1. Forehand Friendship 729-08 Energetic Anti-Glue, Backhand Aibo Bomb Tiansha Tensa

    2. Forehand 729ES Provincial Team Special Edition, 48 degrees, backhand arrogant big Z Jie 3, forehand Ni Tianji 3 (40 degrees), backhand neo TG3 40 degrees.

  17. Anonymous users2024-01-23

    Red and black or better hitting, I personally recommend grinding the ball, because you use an astringent set, if you are used to using a thin friction way to pull a high-profile arc circle, it is recommended that you use a sticky set for the forehand, such as Hurricane 3,729, and an astringent set for the backhand. Personally, I'm also interested in red and black, but I'm a play style that hits a lot and pulls the ball forward a lot, so please refer to it.

  18. Anonymous users2024-01-22

    Finally, don't hang the arc spin ball, it will be bounced or directly rushed by the fast beater.

  19. Anonymous users2024-01-21

    The red and black carbon king is a fast attack board, many people use positive rubber and raw rubber, tango performance is average, it is not recommended to use, it will be better to use a German set, Dornick F1 is a very good choice for Qi matching! It may be a bit reluctant to use the crazy three with a volt-type hand, if you feel that your level has reached a certain height, then you will use it, if you can't reach it, then use a coat, blue V is a very cheap glue, you can also use it, but you think that such an expensive board with such a cheap glue, there is a high hall to guide ......I think Darker Purple D is good, although it is not very famous, but it is still very good to fight!

  20. Anonymous users2024-01-20

    The carbon wood structure of the red and black carbon king maintains the feel of pure wood, and at the same time uses toner to increase the hard elasticity, the combination of pulling and playing is good, the ball is fast, and the rotation is strong. The second speed of pulling the ball is good, the first speed is also good, the arc is easy to control, basically I want to pull low and pull high free control; Rubbing, swinging, skimming this kind of technology is very good, the ball has speed, it is indeed very good to play fast attack, the ball is slightly sinking, the more force, the more heavy the ball feels, the middle platform can be pulled and played, and the choice is large. Different collocation, different effects, in fact, a good beat still depends on the collocation, adapt to the bottom plate to adapt to the way of playing, on the whole, the forehand hurricane backhand internal energy type rubber is the first choice, anyway, the small butterfly and the like are second. It is also necessary to consider the softness and hardness of the sponge, and the problem of glue potting.

    From the point of view of your choice, the forehand province of crazy glue + ultra-light Yinuo King, a good choice.

  21. Anonymous users2024-01-19

    It is recommended to use Blue Whale 2 for the forehand and ultra-light Yinuo King for the backhand.

  22. Anonymous users2024-01-18

    The Fierce Omega 4 is a perfect match for the Red and Black Carbon King.

  23. Anonymous users2024-01-17

    The viscosity of the province is large, the second jump of the pull ball is more thief, the sponge of the blue whale is good, suitable for polishing Depending on your playing style, you can consider Nitaku's crusade for the backhand Very easy to use It's a little more expensive.

Related questions
14 answers2024-04-23

Stica's red-black carbon king is very violent, fast on the ball, and difficult to control the ball, but the attack poses a greater threat to the opponent.

5 answers2024-04-23

How can I increase my red diamond rating?

The red diamond grade is marked by LV, for example, LV3 indicates that the red diamond grade is 3. The mapping of Red Diamond Points to Red Diamond Grades is as follows: >>>More

7 answers2024-04-23

The carbon plate we refer to as a carbon fiber composite material should actually be called a carbon fiber composite material, because it is a composite material formed by bonding epoxy resin and carbon fiber filament, which is very similar to the glass fiber reinforced plastic mixed with glass fiber and epoxy resin, but the strength is greater. Although the carbon fiber filament is very lightweight, it is brittle and easy to break, so it needs to be mixed with epoxy resin to change its physical properties, but when the epoxy resin is mixed, the material has changed greatly, this combination makes the carbon fiber composite material can even exceed the strength of steel four times under the same weight, and the plasticity of this material is very strong, the manufacturer can change the strength and toughness of the material by changing the density of carbon fiber, the variety of epoxy resin, and even the temperature and time of curing. However, because the carbon fiber filament material is several times that of silk, and the scrap rate is extremely high when processing special-shaped molds, and a large number of manual molds can be completed after the special-shaped carbon fiber materials are made, so the ** is quite high. >>>More

27 answers2024-04-23

Parameters: Redmi Note 7 Pro is equipped with Qualcomm Snapdragon 675 platform, CPU frequency, equipped with 4 6GB memory + 64 128GB storage. In terms of cameras, the machine has a 48-million-pixel dual camera at the rear and a 13-million-pixel camera at the front, a 48-million-pixel ultra-clear camera (Sony IMX586), and a 13-million-pixel camera on the front. >>>More

10 answers2024-04-23

Black Shark It's good to play games There is an acceleration setting I remember that I bought a children's shoes and the appearance is quite high.