To evaluate the data on PF, the problem of PF utilization

3v3？That's not me saying it's a funny statistic.

Evaluate your data first PF with double G should be based on PF score Because PF has a running advantage over C Score after blocking C is difficult to chase and defend So the score is at least 10 points to be reasonable.

In terms of assists, you are so selfless- -PF wants a book of passing awareness, not to ask for assist stats, but there is nothing wrong with having more balls, probably because you don't play a lot of balls.

It's okay in terms of rebounding, because 3v3 no one is going to make you that much better, and you're not stupid.

In terms of blocks, if you are with a double G, then you are the last barrier of the team's defense, and your teammates will try to give you the opportunity to take risks, just like I won't play PF and C to rob you, so the last barrier is too much to say, and now the good C is all above, so as a pf, even if you are low, this data is not difficult, right?

The above is my analysis of your data, just a personal opinion, if it is not thoughtful, please forgive me All in all, how can PF with double G no chaos can not be compared with C First of all, the rebounding ability Even if your network speed is good enough to compete with C, what about blocking ability? I've practiced a pf with 2g before, averaging 12 points and 7 boards per game (good network speed) assists and taking a 70% win rate Although it looks good, it's very difficult to fight Abuse rookies is okay But when you meet a double that can play a little bit, you must lose Why Lose in the risk PF's blocking ability can't compare with C No matter how good c the opponent can attack 10 times How many times? 8 times to death, what about pf?

So I think the weakest link with PF with 2G is risk, and then I also found out about this problem, so that PF number is now useless, and it's just an occasional play with the board house.

This is my new PF stats right now, and my teammates are generally C and G

Scores, rebounds, assists, blocks.

In this lineup, C is responsible for blocking the opponent's offense, g is running, has a chance to shoot 3s to help me relieve the pressure of scoring inside, and I am the main attacker of the team, and my teammates will create the best misplaced singles opportunities for me.

By the way, as long as there is no C in the opponent's lineup, of course, including pf with 2g, my win rate is basically 100% Why? Risk.

I can't get a good C a game, I can go up to 3 times a few times, which is already a lot for scoring pf, so how many times can pf come down?

As long as we can prevent most of the 2G errands (this is not difficult), the team without C is a dish in my eyes.

Having said that, I would like to give you a little advice.

Take advantage of the fact that the current level is still low Hurry up and change careers Turning to score PF PF with double G is not a long-term strategy Why I have analyzed it The difference is on the rise.

The above is completely my opinion, I am also a person who has played PF with 2G, I hope you will follow my advice.

If you think it's good, give it the best, thank you!!

Yes, I respect PF with two Gs.

The POG 255's 30pf is hereby respected.

Generally, the pf must have a score of 12+ or so The board can be blocked does not mean that you can't take or can't play, generally as long as the pf above the upper risk can only mean that he makes up 3 better.

As a PF, it's not just about scoring, it's important to defend You have to remember that if you don't have 3-5 assists in a game, that's the responsibility of the PF.

You get the idea?

Fewer caps. But it's useless to just look at the data.

Some awesome when teaming up.

It all depends on the overall if you have a win rate of 40% (very low) level 25, but the MVP has a few hundred times.

People love to team up with you.

Entertainment comes first, data doesn't matter, have fun.

Not bad... The hat is a little less... In fact, the score is small.

The data is not good, the data of level 21 is not good, and it is different if it is MVP.

It's not bad, but the hat is a little less

PF (Power Forward) is the big forward, sometimes called the power forward, a position in the basketball game lineup, and there is also a saying of two centers in China. Almost all of the tasks on the team are hard work, and he is indispensable for grabbing rebounds, defense, and card positions, but he is often the last to shoot and score.

There are two reasons for the high use of PF:

1. The memory is too small, and there is really not much data in the memory, such as 128M memory to run XP

Second, there are a large number of resident memory programs (str programs) and automatic loading services, many people as soon as they turn on their phones, what qq, msn, bt, emule, thunderbolt ......When a large number of programs are enabled, these programs and services will occupy a considerable part of the memory space, resulting in a large amount of data that needs to be written to the page file, resulting in high PF usage.

Hardware upgrades are the best way to do this (increasing the memory alone will reduce the hit rate of the machine, i.e. pf will drop and cpu will increase).

There are many ways to improve: install a smaller system, close the program that starts with boot, clear the registry garbage, do the defragmentation of the system disk, set the virtual memory and environment variables, reduce the resolution and refresh rate, and go to the control panel management tools computer management to see that it needs to manually close some system services.

Turn off the things that don't need to start when you boot up,And go to the system process to stop some processes,Of course, this needs to be able to identify the role of each process,It is recommended to change the virtual memory to another physical hard disk (if there is no second hard disk, don't change it),This can reduce the file fragmentation of the system disk to a certain extent,The speed can also be maintained faster for a long time。 Do not set up more than one virtual memory on the same physical hard drive. If your computer only has a physical hard disk, don't set the virtual memory in a partition other than the C drive.

There is a false rumor on the Internet that setting the page file in a partition other than the C drive can improve the read and write speed and reduce fragmentation, which is a serious misunderstanding. People with common sense know that the C disk is the closest partition to the head, so the read and write speed is the fastest, and setting the virtual memory in other partitions will not only not improve the read and write speed, but also make the head frequently seek and shorten the life of the hard disk.

PF is called virtual memory, since it is virtual memory, it must be no faster than physical memory, when it is too high in usage, it will occupy a lot of disk space, the default page file is in C disk, that is to say, high PV usage will make C disk more bloated. And the computer will slow down, and sometimes the computer will even indicate that the virtual memory is insufficient.

1.Physical memory.

The rapid development of computers, that is, the rapid development of computer hardware and software. At present (2013) mainstream computers have more than 4GB of physical memory, compared to more bulky software, such as Windows XP only occupies about 500MB of physical space, while Windows 7 occupies more than 2GB or even more space, these huge files make memory tight when running, if the memory is too small, the PF usage will become high.

2.Use of Software.

The larger the software, the more memory it occupies, but the physical memory is limited, so the more software you run, the higher the pf usage will be. At the same time, some computer users do not check the background software and services of the computer, so these background programs will also occupy memory, and the computer will move these background programs to virtual memory.

3.System settings.

The system settings are not reasonable enough. 1) If a large number of startup items are loaded at the same time when the system starts, these items will be transferred to the background and occupy memory; 2) The appearance of the system, the more system effects are used, the larger the memory occupation; 3) The capacity of the hard disk where the page file is located is about to be used up (or the capacity of the partition where the page file is located is about to be used up), and the virtual memory setting is too small, and the system will prompt that the virtual memory is insufficient. At the end of the day, PF usage is inversely proportional to the size of the physical memory, and the larger the available physical memory, the lower the PF usage will be.

PF is short for Pagefile. It is the meaning of the page file (usually on the system disk).

It is to write the program that is not used in the system memory temporarily into the PF and then call it out when it is in use, so as to reduce the burden of memory If there is less memory and too many programs are started, the PF usage will be increased, which will make the system perform a large number of reads and writes, and such reads and writes will also occupy a lot of CPU time, which is manifested as the system slowing down.

PF usage has nothing to do with the CPU or the graphics card.

Therefore, if the PF usage is high, the system has executed too many programs, and the PF usage of 512 memory should not exceed 480. Otherwise, the system will become noticeably sluggish. For the problem of how to set up virtual memory, Microsoft has provided us with an official solution, for general cases, we recommend the following setting methods:

1) Set the page file in the partition where the windows system is located, and the size of the file is determined by your system settings. Here's how to set it up: Turn it on"My computer"of"attributes"Settings window, switch to"Advanced"tab, in"Boot and failback"windowed"Write debug information"bar, if you are"None", set the page file size to about 2MB, if adopted"Core memory storage"with"Full memory storage", you can set the page file value to be larger, which is about the same as physical memory.

Tip: There is a contradiction here about whether the system partition is set to page files: if it is set, the system may frequently read this part of the page files, thereby increasing the load on the track where the system disk is located, but if it is not set, when the system has a blue screen of death (especially the STOP error), the dump file cannot be created (, so that the program debugging and error reporting cannot be carried out.

So the compromise is to set a smaller page file on the system disk, as long as it is sufficient.

2) Create a blank partition separately, set virtual memory in the partition, its minimum value is set to multiple of the physical memory, and the maximum value is set to 3 times of the physical memory, the partition is specially used to store page files, do not store any other files. The reason why a separate partition is used to set up virtual memory is mainly based on two considerations:

First, because there are no other files on the partition, the partition will not produce disk fragmentation, which can ensure that the data reading and writing of page files are not interfered by disk fragmentation.

Second, according to Windows' memory management technology, Windows will give priority to the use of page files on infrequently accessed partitions, which also reduces the opportunity to read page files in the system disk and reduces the pressure on the system disk.

3) Other hard disk partitions do not set any page files. Of course, if you have multiple drives, you can create a page file for each drive. When information is distributed across multiple page files, the drive controller can perform read and write operations on multiple disks at the same time.

In this way, the performance of the system will be improved.

The pf value refers to the memory value, and it is estimated that there is a virus on your computer, unless you can run the game to reach 1GB, first use the anti-software to check and kill the virus, and you are going to the Super Rabbit** The next Super Rabbit Wizard That software is very easy to use, and it can free up physical memory and clear the useless registry.

The next optimization master, or Rising card Internet assistant is also OK, 360 security guard is also OK, there is a system junk file cleanup, which is very simple.

In Rising it can also tell you how many files you've deleted, which is not bad

The next 360 Weiss is pretty easy to use.

Computer memory usage.

PF Usage: The value of the amount of space that has been used by virtual memory.

Virtual memory is a program that bridges between physical memory and disk, generally due to the limited memory space, when using more processes, some temporarily unused grouped data is stored in virtual memory, and generally virtual memory is opened up in C disk. PF usage is the ratio of these groups of data that need to be used, but are not used frequently, in virtual memory.

When the physical memory is no longer sufficient, put the data that is not used for the time being on the hard disk. It works much like physical memory, and the best way to reduce PF usage is to increase memory.