What classification does the electric door belong to, and what are the cars with the electric door

According to "electric", the electric door is divided into ordinary type (power control box is required, and the power part is in the control box), mechatronics type (power part, and the logic circuit is on the electrical body). This kind of Denso is cost-effective, good reliability), intelligent integration type (just in the mechatronics to add liquid crystal display, electronic stroke, electronic torque, remote control debugging and other functions), intelligent integration is only the update of the Denso body, the development of intelligent integration is the intelligent integration of the bus type, and the update of power components, the use of frequency converters, and frequency conversion type.

Electric doors according to the "door" currently mainly refers to industrial doors, telescopic doors, revolving doors, sliding doors, swing doors, etc., telescopic doors and large sliding doors (iron or stainless steel) are used in enterprises, factories, residential areas and other access gates; Revolving doors and light sliding doors (induction doors) are generally used in the entrances and exits of high-end buildings such as star-rated hotels and bathing centers, and the application range of swing doors is very wide, and swing doors can be applied to doors less than 5 meters.

Electric doors are generally business vehicles, including Mercedes-Benz business vehicles, Volkswagen Matwe, Odyssey, Elysian, Buick GL8, GAC Trumpchi GM8 and so on.

The car smart door, also known as the car side door electric opening system, is generally referred to as the smart door, which is a combination of parts such as door opening actuator, electric suction door lock, radar, ECU and other parts installed on the car door, and the car door can be opened by electric or remote control, without manual push and pull, the door opening and closing operation can be completed, which is one of the car configuration functions.

Function. First, the electric opening and closing of the car intelligent door has four modes - key control, internal and external door handle control and brake closing. The intelligent technology of automobiles is realized through the electric opening system of the "intelligent moving door", which is also the advantage of intelligent and electric intelligent moving doors.

2. In addition to the electric door opening and closing mode, the car intelligent door also retains the traditional manual door opening and closing function, the product does not affect the original car matching door opening and closing function, and the manual operation can be guaranteed in the case of the whole vehicle being powered off.

3. The intelligent anti-collision sensing function of the smart door automatically detects obstacles in the rotation range of the door through radar, realizes the function setting of the suspension of obstacles in the process of electric door opening, and ensures the safety of the smart door system.

Fourth, the all-terrain slope hovering function of the smart door takes into account the situation of slope parking.

Fifth, the car "smart door" also has some other humanized features, such as opening and closing the door anti-pinch, electric door opening failure during the driving process and opening the safety protection mode and other functions to ensure the safety of drivers and passengers, experience intelligence while ensuring safe and stable operation.

The door body is novel and beautiful, flexible, compact in structure, and occupies a small space, which can be widely used in the internal and external doors of buildings. The door body is electrically driven, light and flexible, and the upper and lower strokes are automatically controlled by the limit switch, which is convenient to operate, safe and reliable. It can be operated manually in the event of a power failure.

There are many types of door bodies, among which the fully enclosed door body has good sealing, which can be windproof, dustproof, thermal insulation and corrosion resistance. The door body can also have a fireproof function after special treatment. The rolling door machine has advanced structure, complete functions, and overheating protection device, which can protect the motor from damage when overloaded and high temperature.

A remote control can be installed to enable the electric roller shutter to be opened and closed remotely.

Hail and after special treatment on the material, it has the characteristics of unlimited luster, not easy to stick to dust, and not corroded by the pollution source.

At the same time, the accessories of the electric door need to cooperate well with the motor and mechanism, and the best accessories need to be selected. This allows for a longer service life.

The manufacturing process is good, the surface treatment process of the track, the cutting process of the fabric, the flexibility of the mount, the elasticity of the blade, the treatment of the blade cut, the firmness of the rope, etc.

According to "electric", the electric door is divided into ordinary type (power control box is required, and the power part is in the control box), mechatronics type stuffy dismantling (power part, and logic circuit are on the electrical body. This kind of Denso is cost-effective and reliable), the wise energy integration type (just adding liquid crystal display, electronic stroke, electronic torque, remote control debugging and other functions to the mechatronics), intelligent integration is only the update of the Denso body, the development of intelligent integration is the intelligent integration of the bus type, and the update of power components, the use of frequency converters, and frequency conversion type. When encountering resistance or obstacles, the door control system will automatically prevent accidents from stuck people and trucks.

1) Types of telescopic electric doors.

1) Classification according to the material of the door body:

Stainless steel door body. The door body is made of high-grade stainless steel profiles (rectangular tube, square tube, round tube, flower tube, etc.), which is luxurious and beautiful, with a modern sense.

Mild steel door body. The door body is made of low-carbon steel profiles (rectangular tubes, square tubes, etc.), and the surface is sprayed with plastic, which is economical and practical, and rich in color.

Stainless steel surface titanium plated door body. After the door body is formed with stainless steel profiles, the surface is plated with titanium, which is golden yellow, which is more luxurious and trendy.

Aluminum alloy door body. The door body is made of aluminum alloy profiles (rectangular tubes, square tubes, etc.), and the surface can be plated with different colors, which is lightweight, durable and beautiful.

2) Classification according to the opening and closing mode of the door body:

One-way opening and closing type. One door body and one tractor head, the door opens and closes in one direction, suitable for small and medium-sized fence doors.

Two-way bi-directional type. Two door bodies, two towing heads, at the same time opposite the running door closed, opposite the running door open, suitable for large and medium-sized fence doors.

3) Classification according to the shape of the door body:

Oblique round door body. The upper part of the outer frame (outer curved rod) of the door is circular, the upper part of one side member is an oblique line, and the other side member is a straight line.

Most of the electric doors are electric sliding doors, which have the characteristics of multi-function, and their door bodies have strict requirements for resisting wind loads, and are suitable for installation on various plant building structures. This type of door leaf can be converted manually and electrically. The number of controllable door leaves is not too much, generally single track.

It is divided into two types: lower load bearing and upper load. It has the characteristics of multi-function, and its door body has strict requirements for resisting wind load, and is suitable for installation on various plant building structures. This type of door leaf can be converted manually and electrically.

The number of controllable door leaves is not too much, generally single track. It is divided into two types: lower load bearing and upper load. Lower load-bearing:

The door body is load-bearing by the bottom track and guided at the top. Durability, minimal maintenance, simple safety and control, and adaptability to a wide range of insulation and exterior systems. Upper load-bearing:

The weight of the door body is weight-bearing on the upper part and the lower part is guided. The bearing track strength of the upper part of the door body is required to be high, the bearing performance is excellent, and the operation reliability of the door body is high. The friction of the door body is small when running, the opening is light and stable, the starting torque of the door is small, and the power consumption is small.

Stainless steel electric door: the material is solid, no rust, high-grade and other characteristics, the disadvantage is that the processing is difficult, expensive, the bending accuracy of the bending machine is not very high, in addition to 304 stainless steel accidents other stainless steel will also rust, the sealing strip groove has to be added separately, there is no stainless steel track, the use of galvanized steel track, thermal expansion and contraction phenomenon is more serious, the service life is short. Galvanized sliding door:

The material is sturdy, inexpensive, and the accessories are simple. The most fatal disadvantage is rust, the galvanized steel door frame is rusted and the door panel is rusted, and the sealing strip groove has to be added separately, usually there is no sealing strip. The track material is also galvanized steel plate, which has serious thermal expansion and cold contraction and short service life.

It can be used in factories with low requirements. The door panel is a color steel composite panel (also known as color steel sandwich panel), and the thickness of the door panel of most factory doors is a color steel composite panel, which is thin but not strong at 125px, thick and bulky at 250px, and has few manufacturers, which is not easy to customize.

Color steel composite board is polystyrene board, also known as foam composite board, EPS composite board, there are two kinds of flame retardant and ordinary, the door panel with color steel composite plate foam bulk weight of more than 12kg m, color steel thickness above. Polyurethane color steel composite panel, the production technology is relatively backward, and it is expensive. Glass wool color steel composite plate and rock wool color steel composite plate are not suitable for making door panels for two reasons, one is too heavy, shortening the life of the door, and the other is that glass wool or rock wool is easy to degum and sink.

It is all kinds of automatic induction doors. Professional manufacturer of automatic arc doors and revolving doors. The introduction of German automation technology, adhering to the excellent tradition of European industry, especially for the Chinese market to use soul crystal to develop a series of high-tech, humanized design revolving door products.

To fully meet the various needs of customers, the rigorous working attitude of Germany, the strict management system and the long-term accumulation of production experience in Lunte determine the first-class quality of Lunte revolving door products.

Electric doors can be added with small doors (also known as doors) and windows. The advantages of sliding doors will become the first choice for factory doors in the future. The sliding door leaf consists of a door frame (also known as edging) and a door panel.

According to the sliding door frame, there are three kinds, one is the aluminum alloy profile sliding door frame (hereinafter referred to as the aluminum alloy sliding door), the other is the stainless steel sliding door frame (hereinafter referred to as the stainless steel sliding door), and the third is the galvanized steel plate sliding door frame (hereinafter referred to as the galvanized sliding door, also known as the simple door). Aluminum alloy sliding door: the material is strong, lightweight, beautiful, rust-free, high-grade, moderately medium, and the material is thick.

The door frame and the sealing strip groove are integrated into the design, and the sealing effect is achieved after wearing the sealing strip, and the track (thickness of more than 4mm) is also an aluminum profile, the thickened aluminum profile door body is firm, the use of nylon pulley and aluminum profile track, the push and pull is very light, the door is noisy, the sealing performance is excellent, and the best choice for the factory door, sliding door and industrial door in the future.

Hello, according to the type of door, electric doors can be divided into electric flap doors, electric rolling doors, electric sliding doors, electric swing doors, electric induction doors, electric telescopic doors, electric lifting doors, electric sliding doors, etc., according to different types of doors, on-site installation parts, the door opening motor and other mediums are different.

electric doors, which belong to Group 0920, Class 9 of the Trademark Classification;

According to the statistics of the road sign network, 88 trademarks of registered electric doors have been registered.

How to choose other sub-categories when registering:

1.There was one trademark in the category of "Apparatus for Recording, Transmission, and Reproduction of Sound or Images, Group No. 0901", which accounted for 1 registration.

2.There was 1 trademark in the category of photovoltaic cells and photovoltaic cells, group number: 0922) that was selected for registration, accounting for a large proportion of registrations.

3.There was 1 trademark in the category of demodem, group number: 0907) that was selected for registration, accounting for a high proportion of registrations.

4.There is 1 trademark in the category of science, navigation, geodesy, photography, film, optics, weighing tools, measuring tools, signaling, inspection (supervision), ambulance (rescue) and educational equipment and instruments, group number: 0901), and the registration rate is reached.

5.There was one trademark in the category of "Apparatus for Recording, Transmission, and Reproduction of Sound or Images, Group No. 0909", which accounted for 1 registration.

6.There was 1 trademark in the category of choosing to register (remote control, group number: 0913), and the registration rate was reached.

7.There was 1 trademark in the category of sliding double-angle gauge, group number: 0905) that was selected for registration, and the registration rate was reached.

8.There was 1 trademark in the category of protective helmet, group number: 0919) that was selected for registration, accounting for a proportion of registrations.

9.There is 1 trademark in the category of electing to register (electric gate controller, group number: 0913), and the registration rate is reached.

10.There was 1 trademark in the category of counters and switchboards, group number: 0902) that was selected for registration, accounting for a large proportion of registrations.