For Level 2 Structurists Review Materials What Books to Buy

1.National Level 2 Registered Structural Engineer Professional Examination Mock Test Questions and Detailed Explanations (2009) Song Yupu, Ministry of Housing and Urban-Rural Development Qualification Registration Center Machinery Industry Press (2009-01 publication).

2.2010 National.

Professional Examination Course for Class 1 and Level 2 Registered Structural Engineers Song Yupu, Ministry of Housing and Urban-Rural Development Practice Qualification Registration Center Machinery Industry Press (2010-04 publishing).

3.600 questions must be done to pass the professional examination for registered structural engineers (including past questions) (level 2) Jin Shengcai, China Petrochemical Press (2009-06 publishing).

4.2010 Licensing Examination Series Examination Skills and Problem Solving for Professional Examination for Class 1 and 2 Registered Structural Engineers (2nd Edition) Lan Dingyun, Yang Lirong, Yang Pu, et al., China Architecture & Building Press (2010-03).

5.Tutorial Textbook for the Examination of Registered Architects of the Second Class (Volume 2): Building Structure and Construction Equipment Editorial Committee of the Tutorial Textbook for the Examination of Registered Architects, China Architecture & Building Press (published in 2008-12).

Detailed.

Three exam books and three corresponding review question sets published by the Architecture Industry Press. They are: "Construction Management of Construction Projects", "Construction Engineering Regulations and Related Knowledge", and "Professional Engineering Management and Practice".

pwd=2d72 Extraction code: 2d72 Resource content: analysis of real questions of one construction and two constructions, electronic books required for the new version of the exam, mind maps, mock exam papers, high-quality online courses, overcharge, general charge, pre-exam sprint, courseware, textbooks, brush question bank, all kinds of latest questions, 0 basic classes and other learning resources sharing, including construction engineering, highway engineering, railway engineering, civil aviation airport engineering, port and waterway engineering, water conservancy hail and hydropower engineering, municipal public works, communication and radio and television engineering, mining engineering, mechanical and electrical engineering, etc.

It's useless to read too many exam reference books!

The suggestions are as follows: 1. Only read the books prescribed by the exam, and be sure to buy the books published by the Architecture Bookstore Press! Because this kind of exam is their most authoritative!

2. While reading the book, make a book-matching exercise set at the same time!

3. After reading the whole as a whole, review it at least once or twice;

4. Do a few sets of mock test questions! In this way, you can feel the type of question and the intention of the questioner, and you can test the effect of reading the book and find the pitfalls of the test questions.

The method of applying for the Structural Engineer II and Constructor II is similar!

For those who are already working, the key is to grasp the time to read the book! In fact, this kind of exam is not very difficult, and it is generally easier than the exam in school! As for the low pass rate, it is because many people do not read books, do not do questions, or do not have time to read.

Time, there will always be a squeeze!

There are two parts: the basic examination and the professional examination for the first-class registered structural engineer. Among them, the basic test is an objective question, which is answered on the answer sheet; The professional examination adopts a combination of subjective and objective examination methods, that is, candidates are required to write the calculation process on the answer sheet while filling in the answer sheet.

The basic examination is a closed-book examination, and candidates are only allowed to use the uniformly distributed "Examination Manual" (which will be collected after the examination), and it is forbidden to bring other reference materials (the Ministry of Housing and Urban-Rural Development stipulates that since 2012, the "Examination Manual" will no longer be distributed for the basic examination, and the closed-book examination will not be distributed). The professional examination is an open-book examination, and candidates are allowed to bring a variety of professional specifications and bibliography that have been published regularly during the examination.

Subjects of the Qualification Examination for Registered Structural Engineer of the First Class:

1.Foundation Exam I 2Foundation Exam (B) 3Professional Examination (I) 4Professional Exam (II).

The foundation exam includes:

Morning: 1Advanced Mathematics 2

General Physics 3General Chemistry 4Theoretical Mechanics 5

Mechanics of Materials 6Fluid Mechanics 7Fundamentals of Computer Applications 8

Electrical and Electronic Technology 9Engineering Economics 10Signal and Information Technology (new course in '09).

11 p.mCivil Engineering Materials 12

Engineering Surveying 13Occupational Code 14Civil Engineering Construction and Management 15

Structural Design 16Structural Mechanics 17Structural Tests 18

Soil mechanics and foundations.

Professional exams include:

1.Reinforced concrete structure 2Steel structure 3Masonry vs. timber structure 4Foundations & Foundations 5High-rise buildings, high-rise structures and lateral effects6Bridge structures.

Subjects of the Qualification Examination for Registered Structural Engineer II:

Class II Registered Structural Engineer only takes professional courses, and the subjects are:

1.Reinforced concrete structure 2Steel structure 3Masonry vs. timber structure 4Foundations & Foundations 5High-rise buildings, towering structures and lateral effects.

Registered Structural Engineer refers to the Registered Structural Engineer of the People's Republic of China who has obtained the Qualification Certificate and Registration Certificate of Registered Structural Engineer and is engaged in structural engineering design; Structural engineering design technical consulting; Investigation and appraisal of buildings, structures, engineering facilities, etc.; Provide construction guidance and supervision to the project designed by me; Other businesses stipulated by the Ministry of Construction and relevant departments.

1. The syllabus of the structural engineer examination is used to familiarize yourself with the theoretical framework and review the knowledge points. The outline has a lot of highlights, so the outline is also worth looking into.

2. A set of teaching materials for repeated memorization. However, textbooks alone are not enough, although there are people who have only read textbooks, but such people are often people with a good foundation and a particularly strong comprehension.

3. Textbook supplement and supporting mock test, the test center of this book is relatively concentrated, which is conducive to improving efficiency. Textbook supplements may not be available in every bookstore, so you can consider ordering them online; Other tutorial books, if you have just entered the review, or the foundation is indeed "very poor", it is recommended to prepare some.

The textbook is the focus of the first round of review, and when entering the second round of review, put the syllabus test point first.

4. Analysis of past questions, which is a must for every candidate. Past papers have two obvious uses: one is as a mock question and the other is as a research.

When making a study plan, it is recommended that you first do last year's past papers to understand your basic skills, so that the review can be more focused. Then start the systematic review. Every time you review, do a round of past questions to clarify the direction of the review and the idea of the proposition, so as to check and fill in the gaps in a targeted manner.

After 2-3 repetitions, I believe that I will be able to take the test with confidence.

5. It is recommended to prepare a set of practice books. Do the practice questions on the premise of understanding the real questions thoroughly; When doing each question, you need to know the topic of the question, first, to save time, and second, to quickly and effectively improve the level of test-taking.

6. Mock exam papers, to do 2-3 sets, the role of mock questions is not to improve the level of knowledge, but to improve the ability to take the test.

It's a professional course in college, and if you take out the textbooks in college and read them, you can basically pass them by looking for a few sets of topics to practice.

This one. Go to the bookstore and ask.

The specification says that there are 17 copies, and roughly 11 copies are enough, and the latest version is required. In addition, at least 20 sets of mock questions, 2010 national second-level registered structural engineer professional examination questions and standard answers, national second-level registered structural engineer professional examination mock test questions and detailed explanations, etc., as long as it is a complete set of questions and detailed answers, of course, it is the latest version of the best, because the norms have been changing, no need to read any books such as test-taking guides, it is useless.

1. Code for Loads on Building Structures

2. Code for Seismic Design of Buildings

3. "Pile Foundation Specification".

4.Code for Design of Building Foundations

5. Technical Code for Building Foundation Treatment

6.Code for Design of Concrete Structures

7.Code for Design of Steel Structures

8.Code for Design of Masonry Structures

9. "Technical Regulations for Concrete Structures of High-rise Buildings".

10.Code for the Design of Timber Structures

11.Technical Regulations for Concrete Structures of High-rise Buildings

1。Site Design 2. Construction & Detailing 3.

Structure & Equipment 4. Laws, regulations, economics, construction technology, the first two are difficult to test, the last two are better, generally the last two are tested first, and strive to take the first two subjects in three years, and the results are valid for four years, read more relevant professional books edited and published by Wang Shujing, such as: Introduction to Building Technology, Site Design, Structure and Equipment, Examination Books should also be read, Professor Wang is one of the proposition examiners.

1.Subjects: Reinforced Concrete Structures, Steel Structures, Masonry Structures and Timber Structures, Foundations and Foundations, High-rise Building Structures, Soaring Structures and Transverse Actions.

2.The amount and score of each subject:

Reinforced concrete structure 20 questions.

Steel structure 8 questions.

Masonry and timber structure 20 questions.

Foundations and Foundations 16 questions.

High-rise buildings, high-rise structures and transverse effects 16 questions.

All of the above subjects are compulsory. The average question is 1 point, and the full score is 80 points3About exam books.

Personally, I think the best book is the norms, and there is no problem in mastering the basic, commonly used norms to pass the exam (kind of nonsense, but it is). If you have to find a reference book, you can use the 2013 National Exam prepared by the Licensing Registration Center of the Ministry of Housing and Urban-Rural Development.

The Professional Examination Course for Registered Structural Engineers of the First and Second Levels (Machinery Industry Press) is said to be the only examination book written by the official organization.

National.

1. The second level of registered structural engineer professional examination tutorial" Song Yupu editor-in-chief + "Registered Structural Engineer professional examination examination guide" Shi Lanqing editor-in-chief + "Registered Structural Engineer professional examination answer guide" Shi Lanqing editor-in-chief + a standard.

The 2013 Structural Engineer Exam Textbook contains the following 6 books:

2013 National.

The professional examination course for the first and second level registered structural engineers is compiled by the Professional Qualification Registration Center of the Ministry of Housing and Urban-Rural Development and distributed by the Machinery Industry Press.

The first and second level registered structural engineer professional examination course is to participate.

A necessary examination book for professional examiners of the first and second class registered structural engineers. At the same time, due to the comprehensiveness and practicability of the content, it can also be used as a reference for the design, construction and supervision personnel of civil engineering in their work.

The 2013 Basic Examination Guide for Class I Registered Structural Engineer (Fifth Edition) was compiled by Lan Dingyun and issued by China Architecture and Building Press.

The 2013 First-Class Registered Structural Engineer Examination Basic Three-stage Review Method Examination Guide is compiled by the editorial board of this book and issued by China Architecture & Building Press.

The 2013 first-class registered structural engineer basic examination review course + review question set is compiled by the Editorial Committee of the Registered Engineer Examination Review Book and issued by the People's Communications Publishing House.