-
Anonymous users2024-02-07Over-round cake: the left stem and the middle of the middle of the number of cakes.
The rubber edge blocked the No. 3 cake halfway and killed the left.
When the left corner touches the white line, the steering wheel returns to the right.
Go ahead to the right rubber side and touch 4 cakes and kill the right.
The front glass 3C sign is on the dotted line and returns to the right.
The left stem is stopped against the white line and the left is killed.
The left stem is aligned with the white line.
The right rubber side touched the No. 6 cake and stopped and killed on the right.
The left corner and the midpoint of the stem stop back to the dotted line.
Unilateral bridge: The first 3C sign makes a circle to the left of the dotted line.
The right corner is full of 2 to the dotted line to the right.
The left stem is right on the left side of the steel plate.
The left stem walks along the left side of the bridge.
The front wheel is 50-60cm down the axle and makes a circle to the right.
Walk to the right bridge to the middle of the left bridge and the left stem, and turn back to the left twice.
The left stem and the dotted line are right to the right.
The left stem walks to the left of the dotted line.
Side parking: 30cm difference between the midpoint and the yellow line and the right turn signal.
Reverse gear hit the left turn signal.
No. 1 point-to-pole right to kill look at the left rearview mirror.
When you see the 4th stroke, stop and return to the square.
See the front bar retreat to the bottom right corner of the black object and stop.
Left Kill Retreat to the left corner to stop on the pole.
Gear 1 goes out and hits the left light.
The round mirror is 70cm away from the rod and stops right back to the right.
The rod to the window generally stops right and makes a circle.
The body is straight back to the right.
Right angle: The left stem is 30cm from the pipe
The vertical black bar in front of the right is 5cm away from the white line, and the right is killed.
Get back to the right time at the right time. S: The front of the car to the midpoint of the S left corner of the steel pipe 10cm, the left to make a circle plus 90°
The left stem meets the steel pipe back to the right corner and touches the steel pipe.
Make a circle to the right and add 90°
The right corner walks along the steel pipe until the small round mirror on the right sees the steel pipe head.
The direction is correct. I'm learning it myself, so I've put together my own information.
-
Anonymous users2024-02-06Be more serious when training.
-
Anonymous users2024-02-05Subjects 2 and 5 items include reversing into the garage, side parking, ramp fixed, right-angle turning, and curve driving.
Subject 2, also known as the small road test, is a part of the motor vehicle driving license assessment, is the abbreviation of the field driving skills test subjects, the test items include reversing into the garage, side parking, ramp fixed-point, right-angle turning, curve driving five compulsory tests.
-
Anonymous users2024-02-04Reversing into the garage, ramp fixed-point parking and starting, side parking, curve driving, right-angle turning.
-
Anonymous users2024-02-03Reversing into the garage, BAI ramp fixed-point parking and DU starting, side parking, curve driving, straight DAO angle turning.
Subject 2 (Section)
Subheading 2) Nine genera.
For the driver's license test, the test items of subject 2:
1. Nine items: side parking, slope fixed-point parking plus start, 100-meter increase and decrease gear, continuous obstacles, unilateral bridges, speed limit and width gates, undulating roads, right-angle turns, curve driving, among which reversing into the garage, ramp fixed-point parking and starting, side parking, curve driving, right-angle turning is called the small pentathlon.
2. Learning purpose: Through practice, students will master driving skills and achieve the purpose of better vehicle control.
-
Anonymous users2024-02-02It includes subject 1 (theory test) and subject 2 (pile test and on-site driving, i.e. 3 out of 9), a total of 5 test contents. After passing these 5 items, the final subject 3 (road test) will be easy.
-
Anonymous users2024-02-01Khan won't want to fankai downstairs despise you Zhang Shuai 、、、 no 5 items are not required to be tested 1 right-angle turn 2 over the obstacle 3 limited width door 4 unilateral bridge 5 Li Cheng Fu Road 6 curve state disturbance driving 700 meters plus gear reduction The required test is to reverse the library and move the library. Fixed-point parking. Half-hill start.
Side parking. It's a must, I'm in Shanxi Province, and I don't know what the situation is in other provinces.
-
Anonymous users2024-01-311. Reversing into storage:
Training purposes. Train trainees to accurately judge the reversing trajectory of the vehicle, and control the vehicle to accurately complete the reversing into and out of the warehouse.
Technical requirements. Test takers are required to control the vehicle from one end of the control line (body compressible control line) into the garage to park, then drive out of the garage to the other end of the control line, then reverse into the garage to park, and finally drive out of the garage to the starting point. Vehicles are not allowed to stop on the way to enter or retreat.
Technical requirements and marking of reversing and warehousing site.
2. Start with a fixed-point stop on the ramp.
1) Training purpose.
Train the trainees in the ability to drive the vehicle on the uphill section, accurately judge the parking position, stop smoothly, choose the gear correctly, coordinate the use of the accelerator pedal, parking brake and clutch, and start smoothly.
2) Technical requirements.
Candidates are required to correctly judge the parking position through vision and feeling, control the vehicle to stop smoothly, pull over and stop smoothly at a fixed location, choose this including destroying the appropriate gear, and coordinate the use of the accelerator pedal, parking brake and clutch to start smoothly. When starting, the vehicle should not slip backwards, and the starting time should not exceed 30s. Ramp fixed-point parking, starting site technical requirements and marking.
3. Side parking.
1) Training purpose.
Train the trainees to temporarily stop on the side of the road, accurately judge the position of the body space and the trajectory of the wheels during the exercise, and control the vehicle to accurately reverse and park in the parking space on the right side of the road.
2) Technical requirements for side parking.
Candidates are required to accurately judge the spatial position of the body and the trajectory of the wheels during the movement, and control the vehicle to stop on the right in front of the garage. Once reversing into place (library), the wheels do not touch the edge of the lane and the edge of the storage location. Technical requirements and marking of the side parking lot.
4. Curve driving.
1) Training purpose: To train students to control the steering wheel and control the vehicle curve in motion.
2) The technical requirements for curve driving require candidates to drive the vehicle forward from one end of the curve S curve and exit from the other end. Yes.
Keep steering and steady speed while driving, and the wheels should not touch the side of the lane, and no stop should be made in the middle of the road. Technical requirements and marking of curve driving site.
5. The purpose of Naomori corner turning training.
Trainees are trained to correctly control the steering on sharp curves and accurately judge the difference between the inner and outer wheels. The technical requirements for right-angle turning require candidates to drive the vehicle at a low speed according to the specified line, and control the steering from left to right or from right to left to make a right-angle turn at one time. No stops are allowed on the way, and the wheels are not allowed to touch the side of the roadway.
-
Anonymous users2024-01-30For the New Year, I'll cover you together.
-
Anonymous users2024-01-29There is no subject five.
According to Article 31 of the Regulations on the Application and Use of Motor Vehicle Driver's Licenses issued by Order No. 123 of the Ministry of Public Security of the People's Republic of China, the vehicle management office shall accept the application for a motor vehicle driver's license and arrange the test according to the appointment date. The order of the examinations is according to the subjects.
1. Subjects. 2. Subject 3 will be carried out in turn, and only after passing the examination of the previous subject will you be allowed to take the examination of the latter subject. After passing the road driving skills test in subject 3, you are allowed to take the safe and civilized driving knowledge test.
So the driver's license C1 only: subject.
1. Subjects. 2. Subject 3 and safe and civilized driving general knowledge test, there is no subject 5.
1.The driver's license test first takes a theory, and the theory can only be tested after a score of more than 90 points before the next three practical operations, the three courses are the pile, the venue, the road test, and the test time is one week after the end of your last test can be tested 2Yes, you have to sign up and communicate with your driver master, ask him to arrange your theory test first, and then let him understand your time requirements3 >>>More
Subject 2 has been taken five times, but you need to retake it from the beginning of the subject. >>>More
The full score is 100, and the point deduction system is adopted, and the deduction to 80 or less fails the exam, and 80 points is the passing line. It is allowed to make two small mistakes, such as forgetting to turn signals in a right-angle turn, and failing to grasp the fixed-point parking distance, and deducting 10 points at a time. Some items are directly deducted 100 points, such as pressing the yellow line, not wearing a seat belt, and hanging up the wrong gear, which will be hung up directly.
Probably, Shanghai has raised it 3 times in 14 years.
There are a lot of people queuing, but the traffic control office has limited cars and people, and there are simulated people, so it is likely that you can't make an appointment, so it's good to make an appointment. However, be careful not to make an appointment casually, and if you make an appointment after hanging up, you will be re-queued, and it seems that there is a time limit.