Can the Vivo X50Pro screen be cycled?

This screen can be looped, because as long as you set that theme, it can always loop on this screen, and this theme is very nice to loop.

There should be no way to cycle the screen without me50pro,This should only be able to be used singlely,There is no way to recycle。

Go to the desktop and click Settings.

2. On the settings page, click to enter [Intelligent Somatosensory].

3. After entering the intelligent somatosensory, click to enter the [Smart Screen Turning Off Screen].

4. Finally, click the switch to turn on the [Double Click Bright Screen] to set it.

Of course, the screen in this can be cycled, if it can't be cycled, there is all the correct guidance in other aspects, so in this case, we can use the state of looping to put what other people receive into Fangfang.

The device you are talking about, its screen is completely loopable, you just need to set it up.

The X50 screen is directly all mobile phones together, how do you remove it? How to recycle?

1.It doesn't feel like the pixels are very good during the day, but the pixels are really good at night.

2.The home page can't be looped over.

3.The taskbar only slides down, which is inconvenient to operate and not beautiful.

The vivox 50 pro icon swipe cannot be slid in a loop, you can go to the settings to set it.

For my X50 Pro, if it is in the case of the icon sliding, it can't be looped, we can turn it off again, restart it, and re-enter it.

X50Pro does not support the loop sliding function, you can drag the bottom dot to switch pages.

Vivo X50Pro+ screen parameters:

Display material: AMOLED

Dimensions: inches.

Resolution: 2376*1080

ppi：398

Screen-to-body ratio: Screen-to-body ratio: 9

Screen color: 16 million colors.

The refresh rate of silver per mu of screen screen is 120hz

Touch sampling balance ratio: 240Hz

Screen color gamut: P3 color gamut.

Screen type: Capacitive multi-touch screen.

Contrast ratio: 6000000:1

Low brightness anti-flicker: Yes.

Screen brightness: 500 nits.

vivo X50Pro+ screen with front curtain parameters can be understood:

Display material: AMOLED

Dimensions: inches.

Resolution: 2376*1080

ppi：398

Screen-to-body ratio: Screen-training curtain ratio: 9

Screen color: 16 million colors.

Screen refresh rate: 120Hz

Touch sampling rate: 240Hz

Screen color gamut: P3 color gamut.

Screen type: Capacitive multi-touch screen.

Contrast Lease: 6000000:1

Low brightness anti-flicker: Yes.

Screen brightness: 500 nits.

Hello, your problem, I seem to have encountered it before, the following is my original solution ideas and methods, I hope to help you, if there is a mistake, I hope to forgive me! Of course, it's Samsung S20, Samsung Galaxy S20Ultra is equipped with 2K high resolution to further reduce the graininess of the mobile phone screen, and the 120Hz ultra-high refresh rate can not only make the gaming experience more refreshing, but also significantly improve the smoothness in daily use. The HDR10+ certification is relatively unfamiliar to many people, and with the blessing of this ability, the frequency of the video code and the brightness of the light source in the game can be significantly improved, and the shadow details can also be retained, so that the sense of immersion can be greatly improved, and the audio-visual experience is extremely regrettable.

Hello, the device screen is not sensitive, it will improve a lot after restarting, this situation may be, some data has changed after your system upgrade.

It's also possible that the touchscreen on your device is malfunctioning.

The screen doesn't work, restart, or factory reset, or there is a screen sensitivity in the phone settings, you can go there and reset it.

Under normal circumstances, there will be some small problems in the use of our screen, at this time you can restart the phone, sometimes it can solve the problem, and sometimes it can solve the problem. It may be found that it is due to other reasons.

If this screen does not run smoothly. In this case, we can go to his after-sales service for flashing. General problems can be solved.

1. Use a clean dust-free cloth to wipe the dirt and water stains on the mobile phone;

2. If there is a screen failure problem after the film, the film can be removed and then used for comparison, or sent to the customer service center to re-apply the film.

3. The screen fails when operating a single software

2) Upgrade the version of the software to the latest version, or back up the software data, uninstall and reinstall.

4. When charging, the screen is not sensitive: use the original charger to charge the mobile phone or change to a grounded socket to recharge;

5. Screen failure caused by insufficient running memory: one-click acceleration to clean up the background and restart the phone;

6. If the mobile phone has static electricity and causes the screen to malfunction temporarily, it can be gently wiped with a damp soft cloth;

7. Update the system version of the mobile phone;

8. Enter the mobile phone settings - system management - backup and reset - restore all settings (this operation will restore all the settings in the mobile phone, including: set wallpaper, unlock style, wifi, default opening program, etc., and the third-party software logged in the mobile phone also needs to be re-logged in, if there is important software data, back up in advance);

It shouldn't be a problem with the screen.

Give a few suggestions.

1. Whether the system has been updated recently, if it is updated, you can try to roll back the system to the previous version.

2. Have you changed the theme yourself, such as updating the theme with a third party?

3. Has the phone been dropped recently, etc., if so, it may be a hardware problem with the phone. (The phone's storage is damaged (generally memory damage, the possibility is relatively high) and the screen cable is unstable (the probability is very low)).

Possibility: Updated system > Memory corruption caused by drops (no rate drop is possible) > theme replacement > caused by third-party software.

It is unlikely that there will be a problem with the screen, if you want to send it for repair, check it and find an official after-sales service.

10245 is po 1 woodless, just restart, it's good to turn off the machine and restart.

You see that the screen of the mobile phone does not work and restarts, it means that you still have a problem with this screen, generally like this screen, it is good after restarting, and then if it is not good after use, it must be a big problem with the screen, and it can be repaired.

vivox50 pro screen is not working, you can directly restore the factory, you can restore the factory, you can have a very smart screen.

This means that your mobile phone may be established due to this system, and you can update the system.

This should be stuck.,First of all, the system self-checks,

In this case, I suggest that you restart it to be easier to use, so it will be better to operate, so it is better to restart the camera.

Power consumption is mainly caused by the use of multiple software. It is recommended to use the mobile phone to clean up the background running of infrequently used software and appropriately reduce the screen brightness to achieve a certain power saving effect.

It should be able to switch intelligently, and he will convert it after he reaches a certain amount of power.

Smart switching is that sometimes it is a high refresh rate, sometimes it is a low refresh rate, and you fix it at a refresh rate, that is, when it is 60 boxes, it is the most power-efficient.

For a while, the screen of Wulin P is intelligently switched, please call? It should be power-saving, because how many mobile phones now tell the truth.

No, the Poor 50 Pro's screen smart switching power saving function is hidden above.

vivo x five pro plus screen intelligent switching power saving is still relatively power-saving, cost-effective.

If you don't want this kind of product, is he saving electricity? Generally speaking, he does save tens of millions of electricity.

At present, the material of the mobile phone screen is mainly glass, the glass is very hard at the normal use temperature, according to the subject's description, it may be that the surface of the mobile phone screen is pasted with a layer of mobile phone film, and the mobile phone film is composed of polymer materials is relatively soft.

What I have in my hand is the X50 Pro that vivo just announced.

Have you seen the vivo X50 pro release? Now let's briefly share with you the hands-on experience.

X50Pro Main Parameters:

Operating system: Funtouch OS based on Android 10) Screen: Pole screen, resolution 2376*1080, AMOLED photo:

The rear is equipped with a 48-million-pixel micro-gimbal main camera + 13-million-pixel professional portrait lens + 8-million-pixel wide-angle macro lens + 8-million-pixel periscope telephoto lens, and the front is 32 million pixels.

Processor: Qualcomm Snapdragon 765G octa-core.

Appearance size: Black Mirror: ; Liquid Oxygen:

Battery capacity: 4315mah, non-removable battery.

Weight: Network support: China Mobile Unicom Telecom 2G, 3G, 4G, 5G body memory: 8G RAM+128G 256G ROM expansion storage: memory expansion is not supported.

Connections: Type-C interface, dual-band WiFi, Bluetooth sensor: gravity sensor, proximity sensor, light sensor, gyroscope, electronic compass.