Desktop computer Lenovo, how to use a USB flash drive to make a system, thank you for your detailed

You are a USB disk boot disk did not succeed,Redo it, Won't just see if the computer has an optical drive,Buy a system disc at the stall for less than 5 yuan, Start up and select the optical drive to start,See the interface is a one-click installation,Will be installed。

If the boot disk of the U disk is successfully started, enter the PE, as long as there is a system in advance. GHO files, you can install the system with ghost software, and some PE starts only one software that automatically scans GHO system files, Chinese interface, select the system disk (such as C disk) can be installed directly.

It may be that the USB disk boot disk is not made well, but if it is normal, it can be recognized when it is made and plugged in. You don't recognize that.

How to install Lenovo desktop USB flash drive? Lenovo desktop computers generally have their own operating systems, but there are many types of operating systems, and many users will choose to install their favorite systems, but they don't know how to use a USB flash drive to install a system on Lenovo desktops. In fact, the U disk installation system is not difficult, now Lenovo desktops support the selection of U disk through shortcut keys to start, no need to carry out cumbersome BIOS settings, the following will introduce to you Lenovo desktop computer with USB disk installation system method.

1. If the Lenovo desktop does not have a system, or the system has been damaged, you need to use another computer to make a boot USB flash drive.

2. Generally, a 32-bit system is selected for running memory below 4G, and a 64-bit system is selected for memory of 4G and above.

Steps to install WIN10 on UEFIE disk.

Lenovo desktop computer win10 to win7 system tutorial.

The system crashes into the PE backup C disk desktop data method.

1. Preparations

G or larger USB flash drive: Chinese cabbage USB flash drive making tutorial.

3. USB flash drive boot settings: What are the system buttons for Lenovo computers?

2. The steps of Lenovo desktop U disk mounting system are as follows

2. Insert a USB flash drive on a Lenovo desktop computer, and after restarting, keep pressing F12 or FN+F12 shortcut keys to open the boot menu, select the USB flash drive item Enter, if it is a pre-installed Win8 Win10 model, you need to change the BIOS, refer to the win10 to win7 tutorial of the relevant tutorial above;

3. Enter the main menu from the U disk, press the number 2 or press the up and down arrow keys to select Enter to start the PE system;

4. If you want to repartition the whole disk, you need to back up all the files, then double-click in the PE desktop to open the [DG Partition Tool], right-click the hard disk, and select [Quick Partition];

5. Set the number of partition cavity sails and the size of the partition, the main partition is more than 35g, it is recommended to be more than 50g, if it is an SSD, check the "alignment partition" sector 2048 is 4k alignment, click OK to execute the hard disk partitioning process;

6. After partitioning, open [Chinese cabbage one-click installation], select Lenovo system ISO image, at this time, the GHO file will be extracted, click the drop-down box, and select the GHO file;

7. Then click "Restore Partition", select the location of the system, generally C disk, PE may be out of order, you can select the location of C disk according to the "volume label" and disk size, click OK;

8. A prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to start execution; Wu hail.

9. Go to this interface, perform the operation of restoring the Lenovo system to the C drive, and wait patiently for the progress bar to be executed;

10. After the operation is completed, the Lenovo desktop will automatically restart, pull out the USB flash drive at this time, start into this interface, and continue the system installation and system configuration process;

11. Finally, start into the Lenovo new system desktop, and the process of installing the system on the Lenovo desktop USB flash drive is completed.

That's it for Lenovo desktop computer how to install the system on a USB flash drive, if you need to use a USB flash drive to install a system on a Lenovo desktop, you can follow the method provided above.

Make your U disk system disk ready, press F12 or F11 when starting, and select the startup item directly, and that's it

Hello, press F12 after booting, select your USB device, and it will automatically restart to enter when it is done.

Press F12 and select the USB flash drive ...... directlyUnderstand ......

When you press the power on button for your Lenovo laptop, when "Press F1 for ThinkPad BIOS Setup Utility" will appear at the bottom of the screen, press the F1 button, which will enter the BIOS setup interface.

To set up the laptop to boot on a USB stick, you must do it in this BIOS interface.

1. Press the boot button of the laptop, when the prompt "Press F1 for ThinkPad BIOS Setup Utility" appears on the screen, quickly press the F1 button, and the system will automatically enter the BIOS setting interface of the laptop.

2. In the main BIOS settings page, use the left and right arrow keys on the keyboard to move the cursor to "Security", and then use the up and down arrow keys to move the cursor to the "Secure Boot" option, press the Enter key to enter the option;

3. After entering the Secure Boot menu interface, move the cursor with the keyboard to the "Secure Boot" option, and press the Enter key to confirm;

4. At this time, a selection window will pop up on the page, use the up and down keys to move the cursor to the "disabled" option, and press the enter key to confirm;

5. Then press the esc key to go back to the previous step, then use the left and right arrow keys to move the cursor to the "startup" column, then use the up and down arrow keys to move the cursor to the "uefi legacy boot" option, press the enter key, in the pop-up selection window, use the up and down arrow keys to move the cursor to the "both" option, press the enter key to confirm;

6. Then use the up and down arrow keys to move the cursor to the "UEFI Legacy Boot Priority" option, press the Enter key to confirm, a selection window will pop up, move the cursor to the "UEFI First" option, press the Enter key to confirm;

7. After completing the above operations, press the F10 key, then click OK, save the modification and exit the BIOS settings, the system will automatically restart the computer, at this time, you can use the U disk to start the computer and enter the PE main menu interface.

Click OK in the pop-up restore window, and wait for the system to restore itself, and you cannot interrupt the operation or power off in the middle of the process.

After the image file is restored, the computer will automatically restart and the installation will start without manual operation.

8. After the system installation is completed, the computer will restart again and successfully enter the win7 desktop.

In this way, the installation of the operating system using a USB flash drive is completed, and the computer can resume normal use.