I dug a well, and the water was clear at first, but after 4 hours it started to get worse.

The one you hit is probably an old well! Generally, new wells are not dug deep, it is impossible, and there will be muddy water.

This is because the groundwater under the well you dig is connected to the groundwater without a filter layer, so there is a time when the well water will become muddy.

The right places were not chosen, and some places were not suitable for drilling wells. It means that the place you chose does not have water. The water from the newly drilled wells will be very clear, and there will be no muddy water, only the well water that has been used for several years may not be so clear.

It may be that the salt content is high, you use the TDS water quality test pen to measure, it should be the water quality is hard, and the white floating objects may be scale.

Since both surface water and groundwater are now polluted to varying degrees, water that has not been filtered by waterworks or RO reverse osmosis is not recommended for direct drinking.

The well water you are drinking now may contain a variety of harmful heavy metals, organic matter, antibiotics, bacteria, viruses and other substances that cannot be identified by the naked eye.

Maybe the surface water seeped down. The well in my hometown is bricked at a depth of about 10 meters from the wellhead, and even so, the water from the well will still be muddy for a while when it rains. I don't know if it's useful to lay cement, whether it's good or not.

What should I do if the water in a newly dug well is very turbid?

Newly drilled well, what to do if the well water is very turbid! Hello, I am glad to answer for you<> the new clean and stupid well, the well water is very turbid, we can place gravel and carbon at the bottom of the well, so that the impurities in the well water can play a certain role in precipitation and filtration, the user should carefully understand the comprehensive situation of the well. If there is a pollution source around the well, we need to remove the pollution source or dig the well in a location far away from the pollution source, if there are no other harmful factors, we need to continue to clean the bottom of the well regularly and replace it with new sand and carbon, we need to pump the well water into a bucket and let it sit for a certain period of time when using the well water.

The reason why the water is turbid depends on your soil layer, if you dig the well near the soil, it is easy to be more turbid, and if the soil is more turbid, and if you only drain it once or twice, it may not make the water quality clearer. The solution is to remove the excess floating soil and lay a layer of pebbles and fine sand underneath. Drain the water a few more times and the water will become clear.

If it's a rock layer, just repeat it a few times, I hope mine can help you <>

Do you have any other questions?

Summary. Calcium salts in water react with carbon dioxide in air to form calcium carbonate. This leads to muddy water.

Well. In the countryside, in small towns, there are many wells, which are a sign of people's use of groundwater. Of course, well water can not be directly drunk (except for washing), it contains a lot of impurities, and must be precipitated with alum before it can be boiled and drunk.

Calcium salts in water react with carbon dioxide in air to form calcium carbonate. This has led to the fact that the water has become muddy in the countryside, and in small towns, there are many wells, which are a sign of people's use of groundwater. Of course, well water can not be directly drunk (except for washing), it contains a variety of miscellaneous celery, must be precipitated with alum, etc., before boiling and drinking. Dear

Wells are still often seen in the villages, but very few people use them anymore, because the water in the wells is not as clean as before, and the water pumped up is also muddy, and the water is still yellow like tea after boiling, which also makes our wells a decoration. Is there any way to solve the problem of the water from the well turning yellow? Next, I will give you a few tips and teach you how to make the water in the well turn from yellow to clear.

Method 1: We can place gravel and carbon at the bottom of the well, so that the impurities in the well water can play a certain role in precipitation and filtration, and the user should carefully understand the comprehensive situation of the well.

Method 2: If there is a pollution source around the well, we need to remove the pollution source or choose another place away from the pollution source to dig the well, if there are no other harmful factors, we need to continue to clean the bottom of the well regularly and replace it with new sand and carbon, when using well water, we need to pump the well water into the bucket, and let it stand for a certain period of time to take the supernatant in the barrel after the impurities settle.

Method 3: We can also put a small amount of coagulation precipitant to form flocculent sediment in the well water to achieve the purpose of water purification, but in order to ensure the safety of the well water quality, it is recommended to send the water quality to the inspection department for testing and then drinking.

The above is the specific solution of how to make the water yellow of the well, in general, it is relatively simple and easy to use, I believe that everyone can quickly learn how to operate through the introduction and understanding of the above content, and can quickly make the water of the well clear.

Add half a spoon of powdered alum to the water tank, then stir it and leave it for a period of time, and the alum molecules will condense and precipitate the bottom of the tank. After that, it can be used gently with a scoop of water.

The new big wells have to wait for a period of time to be reused, and during this time, the muddy water will slowly precipitate by itself. . . .

It will naturally become clear after a while, and you can smoke it every day until it is clean.

Pumping water, pumping water can clean the underground waterways.

Summary. When it is first punched, it is clear, but it can be left for a while to become turbid, because your well water contains a lot of calcium salts. Calcium salts in water react with carbon dioxide in air to form calcium carbonate. This leads to muddy water.

I dug a well at home and the water that was just pumped up was clear, but after a few waters, it became mixed again.

Hello, I will solve your doubts for you below, I hope it can help you.

When it first comes out, it is clear, but it can be left for a while to become cloudy, because the well water in your house contains a lot of calcium salts. Calcium salts in water react with carbon oxide in the air to form calcium carbonate. This leads to muddy water.

I really hope I can help you, and I wish you happiness every day!

The turbidity of the well water is mostly caused by the rapid penetration of turbid water, and also because of the exchange of cold and hot currents in the water at the turn of spring and summer. There is a large amount of water in the well, and there is no easy way to deal with it; Generally, it should be clear in the morning, and if it is eaten, it is best to draw water in the morning. In addition, sedimentation treatment can be carried out in the water storage container of the home oak Wangcha:

Add half a spoon of powdered alum to the water tank, stir it, and place it for a few periods of time, and the alum molecules will condense and precipitate the bottom of the tank. After that, it can be used gently with a scoop of water. Pay attention to frequent brushing of the water tank.

Please give it a thumbs up.