There s something on my master board that has fallen, will it affect the computer?

The reasons for this situation are generally as follows: First, the motherboard BIOS battery is dead, or the CMOS detection is wrong. The second is that the device settings in the BIOS are incorrect, for example, the floppy drive is not connected, and you have set up the floppy drive in the BIOS.

Of course, the specific way to deal with it depends on the specific reason when you are prompted to press F1.

Press the "Delete" key on startup to enter the BIOS:

Turning off the floppy drive Standard CMOS Drive A:none doesn't affect your ability to use the computer, otherwise you can still turn on the computer and play?

What falls off is the heatsink of the integrated graphics card on the motherboard, which generally does not affect it in winter, but too high a temperature will lead to a blue screen, etc. That F1 is one in the BIOS settings.

on error consum, turn it off, but I don't know what type of motherboard you have, and pressing F1 won't affect anything anyway.

This big brother, according to your ** display, your radiator has fallen off. Cold

Without further ado, install it quickly, and don't turn on the computer until it is installed, so as not to burn it out due to excessive temperature. Of course, the slow response of the computer may be caused by too high temperature, and you are lucky if it doesn't burn out.

F1 may be because your BIOS settings have turned the floppy drive off, and you can change it under BIOS.

It depends on what is falling, there are many reasons why the computer slows down, it may be a virus Trojan, it may be a memory problem, or it may be a problem with the CPU or motherboard, it depends on the specific situation.

It depends on what it is, the motherboard generally has no parts, just a wrench, you find someone to take a look

Oh, this one, it's for heat dissipation, and you can take it to a general computer repair point to help you put it back

F1 should be your floppy drive turned on. The BIOS detection couldn't find the floppy drive again, so it stopped there.

Just turn it off.

What's missing? Upstairs probably says yes, you go to the BIOS and set it up, turn off the soft zone.

He dissipates heat from the motherboard's northbridge chip! It's okay in winter, but in summer, the temperature is too high, which will cause instability in the host system!

If the main discrete graphics card is okay, if it is an integrated graphics card, it is better to install it!

This is the heat sink of the Southbridge Northbridge chip, it's better to put him back! You look at the one chip on the motherboard that can match the size of this heatsink, and put it back on**!

This is the heat sink, I don't know exactly where it is!! It's just that it affects the heat dissipation, and the rest is fine!

If you think it can be used, you can continue, if you can't use it, take it for maintenance, it's okay for a short time, and for a long time, the main machine will be scrapped! Don't put your computer in for a 25-day return! The capacitor voltage is blood, and from time to time, there will be problems.

This little thing is called a capacitor, and there are about 5 or 6 on the motherboard, and it can't be turned on without him, and there's no problem with one less.

Can you describe the shape of the little thing?

Something like a strap. This is generally a data cable. Let's take a picture right away

What about the figure? Take a look at the picture above to tell you.

There are places to sell electronic originals, bring yours, and buy the same best!

Take the motherboard to the computer city maintenance department.

As long as the chip is not broken, it can be repaired for a few dozen.

Do you want to try it yourself? Interests.

It is estimated to be a chip resistor, and it may be unstable to use. It is safer to find someone who repairs your phone and blow it with a heat gun.

It's best to look for a computer repairer.

Small problems can add up and become big problems.

Find a professional computer repairer to take a look, it may be that your computer motherboard is aging, or your motherboard quality problems, the repair success rate is 50%.

You're awesome! Let's return the motherboard to the factory.

Double-sided tape insulation does not conduct heat No.

Apply 502 glue around the bottom in a circle, apply silicone grease in the middle, and stick it.

It is best to use silicone directly.

Use heat dissipation silicone instead of heat dissipation silicone grease to remove the sticky double-sided tape It is best not to use it.

You can reinstall the system to try, if not, you can connect an external monitor, if the external monitor is fine, it is a problem with your computer screen, if the external screen is also problematic, it is your graphics card problem, you have to send it for repair.

Have you ever set up a desktop display and rotated it clockwise or counterclockwise, and think carefully about whether there is a similar operation. If you really can't figure it out, then go to a computer store or consult your customer service, and get it done as soon as possible, otherwise wouldn't it be a sin for your eyes?

If you have any questions, look carefully!