Every time the computer is booted up, it has to be booted N times

This is when the computer does not detect the hard drive, see if the hard drive interface and the motherboard are in good contact if it is okay.

That's the motherboard BIOS problem, just flash the BIOS.

This is a prompt to select the boot to boot the device, and there may be a wrong boot order. Reboot the system, press and hold F8 when booting up until you enter the prompt page, press the arrow keys to move the cursor to select HDD-0, and it will be booted by the hard disk normally; Insert the bootable disc and select the CD-ROM to boot from the optical drive. Normal should be able to enter the system.

Maintain the system, reboot the computer, and press Delete repeatedly to enter the BIOS to change the first boot device.

You restart your PC and choose how to start.

If I'm happy with you, please rate it! Thank you!

It could be that there is a virus in the computer or something, or that the computer hardware is damp, or that the computer is too dusty.

Enter BOIS to turn off the floppy drive, and then set the first boot item to the hard disk to boot, and F10 to save and restart.

Generally this means that the hard disk can not be detected, you open the computer host, to see if the wire connecting the hard disk and the motherboard has fallen off or the contact is poor, or it doesn't work, just change the line, if it still doesn't work, the hard disk format is reinstalled in the system, this is just my personal opinion, if it doesn't work, I can't help.

In English: Reboot and select the correct boot device or plug in the boot mediain derice

Boot disk not found. Try reinstalling it on a different XP disk. The disc should be set as the first boot disk and the hard disk as the second boot disk in the BIOS. Do not insert any floppy disk or USB drive to boot, it is recommended to restore the system or reinstall the system.

Laptops, boot once and boot up the same every time.

Dear, I'm glad to answer for you: A: Laptop, once booted, every boot is the same can be solved in this way, this is set to the network card as the first boot item. Unplug the network cable and turn it on again.

If it doesn't work, then keep pressing the F2 key (or other keys, there is a prompt on the screen) to enter the BIOS after booting up, set the "First Boot Item" to "Hard Disk", press the F10 key to save the settings, and then restart. If it doesn't work, go to the BIOS, restore to "Factory Settings", press the F10 key to save the settings, and then restart. If the cracked fruit does not work, it may be that the system has a land loss problem, and it is recommended to reinstall the original system.

If it still doesn't work, it may be that you can't find the hard disk, check the various connections of the hard disk, or take it out and hang it on the desktop, if it can't be recognized, the hard disk is hanging.

First, you can first check whether there is a switch problem with the host. The detection method is to unplug the jumper of the switch on the motherboard, and touch the jumper with a screwdriver or other metal object to test, if you can enter normally with a touch, then it is very likely that the host is on the key or the switch circuit board is faulty. If you can't find a replacement board, you can only replace the chassis.

2. Try to upgrade the BIOS of the motherboard, the circuit design of some motherboards (mainly referring to miscellaneous motherboards) may be defective or the power management items of the BIOS may be messed up, which requires initializing the BIOS settings. You can load the default settings directly in the BIOS or deduct the batteries on the motherboard to discharge the motherboard.

Third, the motherboard itself has virtual soldering faults, and some motherboards may have virtual soldering faults when they leave the factory because of design problems. In this case, if we don't understand it, it is not recommended to move it, and the motherboard can be returned to the factory for repair or replacement if it is still under warranty. After the warranty period, you need to find a professional motherboard repair point to repair, the problem is a small fault, it will be faster to deal with, so it will not be very expensive.

Fourth, if the fault means that the computer will work normally when the computer is turned on for the first time, but it will stay at the position where the system enters the desktop, and it needs to be turned on for the second time to enter the desktop normally. Then you need to try to enter the safe mode to check the startup items of the computer, disable all programs that are not necessary for the system and then restart the test, or directly reinstall the system. In most cases, the problem can be solved.

If there is a floppy drive, the card sound is emitted by the floppy drive, this problem is very likely to be caused by the hard disk, if it can't be started, open the BIOS, you will find that the computer does not show the hard disk. Try it with an advanced hard drive repair tool, I have also encountered it, I have completely repartitioned the disk, it has never appeared, if the machine is long, it may be the hard disk aging, make do with it.

This passage translates to the system boot failure,Please insert the system disk,The reason for such a problem is basically caused by your system file corruption,Solution,Put your system installation disk into the optical drive,Select repair,Just the system repair will be good,If you really won't, you can reinstall the system,It is recommended not to delete system files when using,Of course, it may also be that the pirated system disk we use now has missed some system files when doing it,If that's the case, In addition, buy a better system disk to install!

1.The easiest way to check the boot button of the desktop case is to replace the boot connection between the case and the motherboard with the boot and reboot, so that the reboot button becomes the boot button.

2.Definitely not a memory issue.

3.Your motherboard should not use solid-state capacitors, the work of ordinary capacitors is related to the temperature, what is the current temperature around you, if the temperature is relatively low, it may be turned on a few more times.