Playing CrossFire FPS is unstable. It s been like this recently.,Just made win7 system 10.

Landlord: If you are low FPS, I'll tell you about the party.

Second: adjust the resolution of the computer appropriately, and the specific computer monitor is analyzed, and the computer with a relatively low configuration can even consider using 16-bit color.

Third: forcibly turn off the vertical sync of the graphics card, which is necessary.

Fourth: Right-click on "My Computer", Properties, Advanced, Performance, and select "Best Performance".

Fifth:Desktop properties,Settings,Advanced,Monitor,Screen refresh rate is adjusted to 75 or more,What I want to say here is that many friends who play CS even get the screen refresh rate to200,In fact, there is no need,Because the screen refresh rate is above 75,The human eye can no longer distinguish the difference in the smoothness of the picture。

Thank you!

4G memory is best used in a 64-bit system. Again, if you find that the system is unstable after you have made it, it is recommended to replace the system. Win7 has a lot of G version systems. I used the original version and cracked it myself. This does not happen with us.

Replace the graphics card driver. It should be able to solve your blurred screen problem, but from what you said, it seems that the blurred screen, the frame rate is unstable, it should have something to do with the graphics card, try to change the driver first.

There's not much of a problem with its own configuration.、Win7There are a lot of incompatible games to play games.,You can adjust the compatibility to the XP system to try.。 Running in administrator mode also solves a number of problems.

The 1st floor is right.,You're 4G memory, it's best to install 64-bit win7,32-bit can't use up the memory.,It's a waste.。

I still think XP is good for use, not because I can't keep up with the times. It should be much better than Win7 for XP.

When playing CrossFire on the win7 system computer, I found that the FPS value is very low, which causes some game problems, and it is very smooth when playing the game, is there any way to modify the FPS value and improve the game performance? Of course, there is a hail date, and the following is an introduction to the win7 system to play CrossFire, and the FPS value is very low.

What is the fps value:The "FPS" value in CF games can also be understood as the "refresh rate (Hz)" that we often say. The lower the fps, the more everyone will feel stuck, and the higher the fps, the more everyone will feel that the picture is smooth and delicate.

Recommended:

Method 1: Turn off V-sync.

1. Turn off V-sync in the graphics card settings! Intel core display, 3D settings, preferences to "performance travel priority";

2. The NVIDIA graphics card settings can be shown in the figure, turning off vertical sync;

Method 2: Change the power mode.

Set the computer performance in the system power management or other power management software to give full play to the CPU performance;

Method 3: Update the graphics card driver.

Detect and install the latest graphics card driver through Master Lu software;

Method 4: Install the DX component.

Method 5: Upgrade the hardware.

Upgrade bottleneck hardware in the configuration or update the entire platform.

Playing CrossFire on Windows 7 has a low FPS value, which may be due to low system configuration. Here are some possible workarounds:

1.Upgrade your graphics drivers: Low CrossFire FPS values have a lot to do with your graphics drivers. Make sure your graphics drivers are up to date and try to install some graphics drivers that are specifically designed for gaming.

2.Lower Resolution: If you're using an older version of the CrossFire client, you may need to lower the resolution for a better gaming experience.

In the settings of the CrossFire client, select the "System" tab, then the "Display" tab, and set the resolution to a lower value.

3.Turn off dynamics: If you're using an older version of CrossFire customer Ashisui Clan, you may need to turn off dynamics for a better gaming experience.

In the settings of the CrossFire client, select the "System" tab, then the "Advanced" tab, and unselect the "Dynamic Effects" checkbox in the Cheating Client.

The first step is to turn on your computer's discrete graphics card.

The configuration of the computer is high and low, and the graphics card accounts for a large proportion, because the graphics card is a direct cause of whether a game can run or not. Each computer has a different way of adjusting the graphics card, and it depends on the individual's computer. In short, the use of a discrete graphics card should be preferred.

The second step is to adjust the display of the graphics card.

Select the option of image preview, and change the graphics preference after entering, you can see that the image quality will become very rough after changing to performance, and there are a lot of aliases.

The third step is to reduce the effect of the game.

All games have a variety of different image quality requirements, if you only need to run the game smoothly, then reduce the image quality of the game, reduce the display of the game screen, and then lower the resolution to improve the stuttering phenomenon.

The fourth step is to run the game in a windowed manner.

This is the most efficient way to run the game, and it greatly reduces the requirements for the PC configuration by windowing the game, allowing the PC to run large games with ease.

The fifth step is to end useless processes and background runners.

When running the game, try to end the useless process of the system, otherwise it will affect the running speed, and the best way is to use the 360 game mode directly to change, which is convenient and fast.

Look at the configuration and network speed, it has nothing to do with the system.

Whether the ping is high or not depends on the network.

FPS refers to the frame rate, and it looks at the performance of your machine. Your graphics card's ability to process graphics, your CPU's ability to process data. These can't be improved or significantly improved with some software, tips, etc. If you want to upgrade, change your computer or upgrade your configuration.

fps below 30 people can tell the feeling of the card, higher than 60 frames will appear water ripples, skip frames (do not turn on vsync), so your fps is above 30, not less than 30 you can't feel the card, even if there are only more than 20, it doesn't affect your game much.

The style seems to be a **, right.,What do you want to do with the graphics card... Could that style still turn into a block, a ball? Styles will occupy a little system resources and a little memory, which can be basically ignored.

It's not necessary to reach 200 fps, like I said, when it reaches 200, there will be water ripples, frame skipping, and if the fps is too high when playing games, such as exceeding the refresh rate of the monitor (generally 60 frames), you have to turn on V-sync to limit the number of frames.

FPS is only more than 30,Also installed win7,You try to change the style of win7 to classic style (although it looks a little ugly,But it can save graphics card resources,FPS will rise)

If you want to increase the FPS a lot, you need to change to a stronger graphics card, so that the FPS can reach about 200.

My classmate's new notebook has the same situation.,He restored the system on the good.,My desktop also sometimes has this phenomenon.,But it hasn't been solved.,It's not a problem to play CF configuration on the current computer.,And your ping is not high.,Restore the system and try.。

I don't know, I haven't really studied it.

There could be the following reasons:

After the last update, the FPS of most of the friends will fluctuate, and the next time the game is updated, it will be stable.

Suggestion: 1: Clean up the cache of the computer, 2: The antivirus software will kill the virus and restart it.

3:CF has a game repair can.,You find a repair.,It's going to be more stable.,Recently, a lot of friends fps are unstable.,It's been fed back to the official.,The next update will be adjusted by the official.。

The video memory of your configuration graphics card is a bit low, it is recommended to replace the graphics card with large video memory, and playing games will be more stable.

May my answer.

It can solve your worries.

1. There are many factors for frequency drops, which may be caused by graphics card driver conflicts after you restore, unstable network, and too many background programs, which may cause you to play the game not smoothly enough.

2. After the computer is restored, press F8 to enter safe mode to uninstall your graphics card driver, take out the driver disc that comes with the computer to install the graphics card driver, and check your network speed and the number of background programs opened.

If you are not satisfied with my answer, you can continue to ask questions or give valuable comments, thank you.