Double spray, broken spray, super start, point float, side float, what s the matter, invite fingerin

Updated on home 2024-04-01
19 answers
  1. Anonymous users2024-02-07

    This is quite simple, I said a little simpler, so as not to say too much but listen confused, is to drift when you start, try to drag the drift line a little longer, don't drift when you drift, let go of the drift key, you want to spray one in the release of the drift key, let you spray one later, understand not.

  2. Anonymous users2024-02-06

    It's simple! First of all, press and hold the front button and any direction when countdown, and only press the W button when starting, and the car will deviate to any arrow key you just held down, and then you will do a double spray in the opposite direction! Thank you!

  3. Anonymous users2024-02-05

    I'll teach you....First of all, you have to be able to double spray、Now take the right rank as an example:Upper build, right build, drift build (click to let go), and then press the left build to pull back the head, and then let go of the left build, here is the point....In the release of the left build is the same as pressing the drift to build do not let go, and then press the upper build for the first small spray, release the drift to build, press the upper construction again, carry out the second small spray, so that it is completed....You say you sometimes drift for a long time? That's because you don't drift deeper, you try to drift a little deeper, that is, if you go to the right rank, the right build first press a little longer, and then pull the front of the car...Understand?

    There is also a relatively fast rank double spray (to the right as an example): on the drift build (click to release) right left (press the left to build while quickly pressing the drift twice to build) and then double spray, hope to adopt! If you have any questions, add me.

    Remember to adopt it.

  4. Anonymous users2024-02-04

    Unlike the double spray in the run, the run is to float twice first, and then complete the two sprays. In QQ Speed, the first float is carried out, the second float is performed at the same time when the first spray is performed, and the second spray is carried out last.

    Drift fingering: 1, +shift to the right.

    2, +Adjust the direction of the front of the car.

    3. Release Press +shift at the same time as quickly pressing (reverse arrow key + drift key press once to release, the time will hit the wall for a long time, and the first spray will be completed automatically).

    4. Release and press again quickly (to complete the second spray).

    To put it in layman's terms, press the reverse arrow key and the drift key at the same time when drifting the small spray, and press the reverse arrow key and the drift key to loosen, otherwise it will hit the wall.

  5. Anonymous users2024-02-03

    The fingering of the double spray in QQ Speed is as follows:

    1. Press + shift to enter the normal drift state;

    2. Immediately press + to correct the direction of the front of the flying car; (Note that none of the steps can release the throttle button:)

    3. Release the throttle button: and press +shift at the same time to perform a secondary drift; (At this time, be careful not to press the accelerator button, otherwise it will be prematurely fired).

    4. Press the + button to straighten the front of the car and breathe fire at the same time;

    5. After letting go, press it again quickly, and this is the second fire-breathing;

    The above is the fingering of the secondary fire.

  6. Anonymous users2024-02-02

    Some small slopes have a short time to carry out double spraying, this side is relatively simple, only need to quickly click on the small spray, in the shortest possible time with the air and landing two small sprays, or can be a small ride for others.

    Broken drift + double spray].

    Broken drift can allow players to quickly correct the front of the car in the process of drifting, if the operation is not in place, it may not be possible to use double spray, the following will teach you the specific step-by-step operation.

    Press the drift key twice to break the position.

    1. Entering the bend: For normal bending operation, press and hold the bending arrow key and hold down the drift key to enter the bend.

    2. Out of the corner: Arrive at the suitable position to perform the exit operation, click the reverse directional key to pull the head of the car, release the drift button and quickly click a drift to complete the broken drift.

    3. Double spray: Riders who have completed all operations according to the above conditions and have no collision will be able to successfully carry out double spray operation by clicking on the small spray twice in succession after the first small spray is lit.

    Riders will need to perform a variety of actions to win the event, and they can check the tricks in the "Trick Instructions" in the bottom left corner of the battle room.

    Super Start: In the 1st countdown stage, when the aperture reaches the size of the start button, press the start button to get a powerful start spray effect.

    Air Spray: During the air period, click the small spray button to trigger.

    Floor Spray: After landing in the air, click the small spray button to trigger.

    Double spray: During the drift pulling of the head, press and hold the drift button without loosening, when the small spray lights up, release the drift key and click the small spray button, and then you can click the small spray button again to trigger the double spray.

    WCW Spray: Nitrogen is used once in the interval between two injections after drifting, making the acceleration more violent.

  7. Anonymous users2024-02-01

    After successfully drifting around a corner, hold down the drift button without letting go, spray it first, then quickly release the drift button, and spray it again quickly. Promptness, proficiency and consistency are required. Otherwise, it will be difficult to apply it to actual combat.

  8. Anonymous users2024-01-31

    Normal and elegant, right? The normal fluttering is about to end, but press the fluttering button again (and then press it) for the second time to breathe fire and it will be successful.

  9. Anonymous users2024-01-30

    What a simple question. When drifting, hold down the drift and don't loosen it, first spray it a little, let it go, and then spray it smaller.

  10. Anonymous users2024-01-29

    After floating, don't let go of the drift button, and release the drift button and spray again. The keys are how you set them up yourself. However, most people change the key in that direction to 5--2--left-1-right3Complete!

  11. Anonymous users2024-01-28

    Double spray is when you spray single, don't you need to like you want to turn right, if you want to not hit the wall, don't you still need to press the left button? The double spray takes advantage of this moment to spray again. Like turning right, you need to press the right button first, then press the left button, and note that the drift key cannot be released.

    Then press W. twice directlyIf you want to learn double spraying, you must have stamina. It took me two months to get it.

    Spring manual input, watchtower master adoption.

    If not, remember to find me QQ super very you dead. It's just me.,Don't worry about finding it.,Super start is to start pressing w and then float it.。

    Give me a satisfaction! Recommended answers are also available.

  12. Anonymous users2024-01-27

    After drifting, the drift button is not loose, press twice

  13. Anonymous users2024-01-26

    Drift build hold down, then tap , squirt, and press again.

  14. Anonymous users2024-01-25

    Keep holding down the drift button when cornering, and then press , and press it after a small spray

  15. Anonymous users2024-01-24

    I'm going to give you a video and I'm going to practice 271647105 myself

  16. Anonymous users2024-01-23

    Broken double spray, just a little faster than ordinary double spray, click the drift button twice to pull the front of the car.

  17. Anonymous users2024-01-22

    Simple: When the countdown is 1, press and then quickly press the drift button and you are one step ahead of others [if the front of the car is crooked, forcibly pull the front of the car, the front of the car is straightened] This is a simple way to start faster than others What you said is to start doing what I said, and then drift (this drift is not like a corner, just a little to let the car drift, but don't break, so nine hundred busy, to drift a little This is the time to press the 、、、steps of the double spray, I think what I said is much simpler than those masters What is that? Originally, there was a little clue, so I was completely confused at a glance Can those masters not mislead people's children Double spray is actually very simple Press and then press the shirt is not loose in the next press It is the legendary double spray As for the three sprays, you don't have to think about it, that kind of situation is rare, many tracks can't be done Start faster than others, and learn to get stuck Don't let other people's cars in front of you, block the behind, and don't let him copy your car.

  18. Anonymous users2024-01-21

    That technical term is called super start, which is to spray and drift at 321 hours.

  19. Anonymous users2024-01-20

    There is an official website, you can go and see and practice your skills.

Related questions
20 answers2024-04-01

Twin sprays are mostly used in corners, that is, fast cornering and fast air gathering! The rank is mostly used in the ethereal of knowing and is used to know the rank of rapid gas gathering! The two are different keys and functions, take a look at the ** and you can find the difference! Thank you.

17 answers2024-04-01

Now the running has entered the SR era, and the broken position and even spray have become the basic technology, first of all, it is recommended that the landlord practice them. >>>More

16 answers2024-04-01

Press shift to enter the normal drift state.

2.Straighten the front of the car (the first part can not let go of the accelerator). >>>More

4 answers2024-04-01

To put it simply, drift the swing head (to angle), click the forward button, let go of the shift key, and then click the forward button. Double spray as follows, press the shift key and arrow key to drift (at this time the head of the car is very important, after the head of the car, the wheel print and your car can not be in the same straight line, but should have an angle, about fifteen to thirty degrees), and then click the forward button, after spraying for the first time, then put the shift key, and then click the forward key to complete the second spray, this time there is no angle requirement, the car is completely forward. To put it simply, drift the swing head (to angle), click the forward button, let go of the shift key, and then click the forward button. >>>More