When the computer is recording, it can only record the computer s own voice, and what is the problem

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

The problem is often in the small place, see if the plug is plugged in correctly.

If correct, then check the audio panel output and input options, if the driver is correct, there are options in the control panel. The functions of win7 still need to be adapted.

Summary. Hello, 1. It may be that the microphone device function of the computer is not turned on, or an application has disabled the microphone device, resulting in no sound when the computer is recording. Workaround:

Try to open the Windows settings interface, then tap on the "Privacy", then "Microphone" option, and finally find the microphone device or disable the microphone device app, and turn it on. 2. It may be that the computer's sound card or microphone driver is faulty, resulting in no sound during computer recording. 3. It may be that the hardware equipment of the computer about recording has been damaged, resulting in no sound during computer recording.

The latter two may recommend going to a computer repair station.

Hello,1、It may be that the computer's microphone device Gongyan Bineng is not turned on, or an application has disabled the microphone setting, resulting in no sound when the computer is recording. Solution: Try to open the Windows settings interface, then click on the "Privacy", then click on the "Microphone" option, and finally find the microphone device or disable the microphone device app, and turn on its function.

2. It may be that the computer's sound card or Mai Xuxiang's wind driver is faulty, resulting in no sound when the computer is recording. 3. It may be that the hardware equipment of the computer about recording has been damaged, resulting in no sound during computer recording. The latter two may recommend going to a computer repair station.

You can play **, but you can't play the recording.

Is it that the recording file was not recorded, and there was no sound in the first place.

I recorded it two or three times without sound.

Then it is recommended that you go to a computer repair station to check it out.

First of all, you have to make sure that the sound card driver is installed correctly. Detection of sound card drivers can be performed by:

1. Right-click "My Computer" and select "Properties" in the pop-up menu.

2. In the window that opens, switch to the "Hardware" tab and click the "Device Manager" button to enter.

3. In the "Device Manager" window that opens, check whether the "Sound Card Driver" is installed correctly, if there is a yellow exclamation mark, it means that the sound card driver is faulty, at this time, right-click and select "Update Driver" to reinstall the driver.

Sound card (soundcard), also known as audio card (Hong Kong and Taiwan call it sound effect card), is the most basic component of the computer system, is a kind of divine hardware to realize the mutual conversion of sound wave digital signals. The basic function of the sound card is to convert the original sound signal from the microphone, tape, and CD, and output it to sound devices such as headphones, speakers, amplifiers, and tape recorders, or to send out the sound of synthesized instruments through the ** device digital interface (MIDI).

1. Sound card driver problem. Check in the device manager, whether the driver is not installed in the hungry shed, if so, it is more convenient to install with the driver wizard, and it can automatically match the soft and rotten parts of the driver.

Second, hardware problems, check whether the device is connected well, and whether the microphone is working properly on other computers. You can also test the hardware in Tuning Audio Properties.

3. Set up the problem, hit the celebration to open the audio properties --voice --volume --options--attributes in the menu to hook all items, find the microphone hook, if it still doesn't work, click the microphone to check the following advanced, and check the 1 mic boost (1) in the other options in the menu

4. Check if there is a problem with the recording software and try to reinstall the recording software.

Possible causes include:

Microphone is not turned on or connected: Check if the microphone is cracked and turned on or connected.

Microphone mute: Please check whether the microphone is muted, you need to unmute.

Audio settings are incorrect: Check that your audio settings are correct, such as selecting the wrong input or output device.

Audio driver peeling problem: Sometimes there is a problem with the audio driver, and you need to update the driver or reinstall it.

Network issues: Unstable network or insufficient bandwidth may cause audio to fail to transmit, and the network connection needs to be checked.

If none of the above methods solve the problem, it is recommended to contact technical support.

Check the sound card settings.