How much power does it take to open a hot pot restaurant with 30 2500w induction cookers?

The total load is about: 32 34kw, and the total current is about 160 A. If the external power supply is three-phase electric.

The load is evenly distributed, and each phase is more than 50 A at most, then the bus is basically enough with a line of 10 square meters; If the external power supply is single-phase.

The bus needs to be 50 square wires.

1. Induction cooker.

It uses a coil disc to generate a high-frequency (20 25kHz) alternating magnetic field under the action of the control circuit, and generates a large number of dense eddy currents through the permeable (iron) pot, which also induces current.

It is converted into heat to heat food and is most energy efficient.

2. Be sure to use iron, special stainless steel or iron enamel pans, and the diameter of the bottom of the pot should be 12 26 cm.

If 30 induction cookers are fully turned on at the same time, the total power is 75kw. 75 kWh per hour. It's hard to turn on so many wires at the same time. This consideration is unrealistic. Each open 1000w calculation, the total is also 30kw.

30pcs 2500w is 75kw. It is recommended to divide into three phases, each phase with 10 16A sockets, a total of 30 three-phase. The current is 480 by socket 16.

That is, 96kw. It is recommended to install a 100kw transformer. In this way, your general lights, low-power equipment, etc. are enough.

Requires 75kw of current, ** pot shop selection induction cooker recommends you to use our Saijin brand hot pot induction cooker. The materials used are all first-class.

Hello dear, the use of a 6000 watt induction cooker requires at least 6 square meters of cable. Therefore, the cable required for 21 6000-watt induction cookers in a hot pot restaurant is at least 6 square millimeters. It should be noted that if the cable length is long, the cross-sectional area of the cable should be appropriately increased to reduce the loss and heat generation of the cable.

Extended: Cable Selection in Electrical Engineering Cables are used to transmit electrical energy or signals, and their selection takes into account many factors such as current, voltage, ambient temperature, conductive materials, etc. The specification of the cable is usually represented by the cross-sectional area of the cable, and different cable specifications are suitable for different occasions.

In the actual project, in order to ensure the safety and reliability of the cable, the selection, layout and rubber maintenance should be carried out according to the design requirements. Summary: The cable required to use a 6000 watt induction cooktop is at least 6 square millimeters.

The size of the cable cross-sectional area should be comprehensively considered according to the current, voltage, temperature and other factors. The selection of cables in electrical engineering should follow the design specifications to ensure the safety and reliability of the cables. I'm glad to answer for you, and I hope I can help you.

Hello, dear! To determine how big a cable needs to be used for 21 6000-watt induction cookers in a hot pot restaurant, the following factors need to be considered:1

Cross-sectional area of the cable: The larger the cross-sectional area of the cable, the stronger the ability to pass current, and the greater the current of electric excavation. Therefore, the required cable cross-sectional area needs to be calculated based on the total power of the induction cooker and the length of the cable.

2.The length of the cable: the longer the length of the cable, the greater the resistance of the cable, and the cross-sectional area of the cable also needs to be increased accordingly to ensure the stable transmission of current.

3.Installation environment: The temperature, humidity, ventilation, etc. of the cable installation environment will also affect the carrying capacity and safety of the cable.

Depending on the total power of the induction cooker and the length of the cable, it is generally recommended to use a cable with a cross-sectional area of 10 square millimeters to ensure the stable transmission and safe use of the current. However, it is necessary to calculate and choose according to the actual situation. At the same time, during the installation of the cable, it is necessary to pay attention to the correctness and safety of the wiring, ensure that the cable can work normally, and avoid safety problems such as overheating of the wire.

Hello, dear! According to electrical safety codes, the choice of cable should take into account the current load and cable length. 1.

For this case, we need to calculate the current load first. According to the data given in the title, the total power of the 21 induction cookers is 21 x 6000 = 126000 watts. Assuming the voltage is 220V, then the total current is 126000 220 = Amps.

2.According to the electrical safety code, we need to select the cross-sectional area of the cable to ensure that the cable can withstand this current load. Generally speaking, we will choose a cable that is slightly larger than the calculated value to ensure the safety of the cable.

3.Therefore, we can choose 4 cables of 16 square millimeters, or larger cables to ensure the safety of the cable. 4.

It should be noted that the length of the cable will also affect the choice of cable, if the cable length is too long, we need to be careful to choose a cable with a larger cross-sectional area to ensure that the resistance of the cable will not affect the normal operation of electrical equipment.

The power consumption of different types of small hot pot induction cookers is different.

According to the number of users, hot pot induction cooker can be divided into meal induction cooker and meal induction cooker. The power of the induction cooker is between 500W-1000W, and the power consumption is per hour when it works continuously. The power of the induction cooker is more than 1000W, and the power consumption is more than 1 kWh per hour when it continues to work, and the higher the power, the higher the power consumption.

Summary. Hello. Theoretically, if this induction cooker has been working at 2500w, that hour is the kilowatt-hour of electricity, and how much electricity does a 2500w induction cooker consume in an hour.

Hello. Theoretically, if this induction cooker has been working at 2500W, then one hour is the kilowatt-hour, hello. The power of the induction cooker is 2500W, and it uses one kilowatt-hour of electricity after 24 minutes of using the acres of cherry blossoms.

The power consumption of a device with a power of 1000 watts is 1 kilowatt-hour of electricity, while the power of an induction cooker is 2500W, which is the consumption of electricity per hour. After conversion, the 2500W induction cooker consumes one kilowatt-hour of electricity in 24 minutes.

Hello, this is only a theoretical calculation, is the maximum power consumption, if you use the induction cooker in different powers, this will be different.

The power of a single pot of a special induction cooker for hot pot restaurants is about 2000 watts.

The difference between professional hot pot induction cooker and household induction cooker].

1. High efficiency and energy saving. The output power of the hot pot induction cooker is 15-25% higher than that of the ordinary induction cooker of the same power, and the thermal efficiency is as high as more than 95% (92% for civil and ordinary commercial induction cookers), with stronger firepower and faster heating speed, which can save operating costs;

2. Stable performance. The hot pot induction cooker is designed according to the characteristics of commercial places, according to the requirements of industrial grade, the quality level of the components is higher, and the key parts are imported or A-grade products of well-known domestic manufacturers, so the performance of the whole machine is more stable, the failure rate is lower, and the service life is longer;

3. The applicability of the pot is better. Household induction cookers are usually sold with pots, and the pots are either not usable, or the power changes very much; The hot pot induction cooker takes into account the material, structure, shape, size and other factors of the pot from the design, so the versatility of the pot is good, and the power does not change much.

4. Higher security. Hot pot induction cookers generally use A, B grade microcrystalline plates as heating panels, which have better high temperature resistance and impact resistance. In addition, the movement circuit adopts multiple protection technology, and the shell is also waterproof, so that there will be no electric shock accidents due to high temperature, overload machine**, or exposed electricity.

Low power: 500-1000W; High power: 1200-3000W

How to use it correctly:

High-power induction cookers are most resistant to water vapor and moisture, and should be kept away from hot gas and steam. There is a cooling fan in the high-power induction cooker, so it should be placed in an air circulation place, and the air outlet should be more than 10 cm away from the wall and other items, and its use temperature is 10-40.

When using a high-power induction cooker, do not place ferromagnetic objects such as knives, forks, and bottle caps on the cooktop, and do not put watches, audio tapes and other items that are susceptible to magnetic fields on the cooktop or carry them on the body for the operation of high-power induction cooker.

Although the high-power induction cooker has the function of detecting air burning and dry burning, try not to let its pots and pans be empty and dry burned, so as to reduce the trouble caused by air burning and dry burning.

After the high-power induction cooker is used, the gear switch should be adjusted to the minimum position, and the power should be turned off immediately.

When cleaning the high-power induction cooker, try not to brush the stove panel with a metal brush and avoid hanging flowers on the panel.

Woks with high-power induction cooktops cannot use containers such as glass, aluminum, and copper to heat food, and these pots made of non-manufacturer-specific materials will not heat up effectively.

After the high-power induction cooker is used, the gear switch should be adjusted to the minimum position, and the power should be turned off immediately.

Whether it is a small hot pot induction cooker, or a large hot pot induction cooker, his power consumption is determined by his power, 1000 watts of electricity consumption per hour 1 degree, according to this formula, see how much power yours has, just do the math.

The power of the small hot pot induction cooker is 500-1000w, and the electricity consumption per hour is about 1000w.

Small hot pot induction cooker is now generally 600w-800w per hour, and the power consumption is --- such as a vertical hot pot table.