Is it worth fixing the Apple 6 when it can t be turned on if it can t be turned on

It depends on the situation, Apple 6 water ingress causes it to be unable to boot, and the cause of the failure can only be known through disassembly detection, It is recommended that the user send the mobile phone to the brand customer service to test the hardware, and the user will be informed of the cause of the failure and maintenance after the engineer detects it**. , the user can decide whether to repair according to the situation, in ** repair.

In 1976, the first logo of the apple was drawn by Ron Wayne with a pen, inspired by Newton's discovery of the law of gravitation when he thought under the apple tree, and Apple wanted to follow Newton's commitment to scientific and technological innovation. In 1976, Steve Jobs decided to redesignate Rob Janov, art director of Regis McKenna, and redesigned a better logo to accompany the Apple II. In 1998, a new logo with a new translucent plastic texture was applied to the new products iMac and G4 Cube, which made the logo more three-dimensional and fashionable.

In 2001, the Apple logo became transparent, mainly to coincide with the Mac OS X system, which was first introduced to the market. In 2007, it was changed again to a silver-gray color with a shadow of metal. In 2013, it was changed to a flat style without a bump-free pure black logo, and it is still in use today.

In response to your question: let's talk about how to deal with it first, the first water ingress must be turned off first to prevent burning the motherboard;

The second is to dry the mobile phone from beginning to end, use a cotton swab to get the gap in and absorb it, and the third is to put a paper towel or bag in the rice jar and seal it for 2 days to let the moisture absorb dry.

The above three steps are what Xiaobai should do, after all, Apple is a whole machine and can't remove the battery by itself, so it can only do this.

But what happens after 2 days?

If it is not serious, it can be used normally, but if it is serious, it will have a blurred screen, a black screen, and various small problems.

In fact, regardless of whether it is used normally or not, there is still water inside our mobile phones, and this water will definitely not be absorbed by rice so easily. Even if it is displayed normally now, the mobile phone is working with illness, and it may crash or even be scrapped at any time.

Because the water enters the circuit of the motherboard, if you don't disassemble the machine and do an internal cleaning with plate washing water and ultra-green wave, it will slowly oxidize and rust, and wait until a certain time, so many lines only need a short circuit, the entire motherboard will be wasted, and it is irreparable. Because by that time, all the lines would be almost rusty.

Therefore, we must take the water inlet machine to disassemble and clean it as soon as possible, and the other thing is that the water inlet machine apple is not guaranteed, which is artificial. And there are some labels in the Apple phone, as long as the water enters, those labels will turn red. Apple will not have a warranty after sale.

It can only be repaired by a mechanic master. Because it is very annoying to do the whole machine cleaning process, the internal fine parts need to be dismantled by professional equipment to clean and dry, and many places are troublesome, only a few large pieces are cleaned up, and the fine cleaning can not be done. And basically there are no ultrasonic instruments to remove water in those places.

There are so many tiny parts, just by a hair dryer to blow, it is useless. So why there will be problems after a while after many water inlet machines have been cleaned, this is also the reason.

If the screen goes black, most of them are broken by the power supply of the motherboard or the baseband of the CPU hard disk. This can only be repaired by experienced masters. Most small shops can give you a replacement part, after all, it is only a disassembly and assembly, which is relatively easy, but to repair at the chip level, it is a headache, and most of the answers are that it cannot be repaired or returned to the factory.

Their so-called factories are factory stores with equipment and machines on our side.

Repaired **, I'll talk about it too. It depends on the severity, cleaning up ** is not expensive, about 100 yuan is OK, the key is that if you design to repair large pieces, iphone6 is basically hundreds to thousands.

The Apple 6 is flooded and now you can't turn on the phone, you can see if the following method is usefulThe first step: first put the phone back from the water.

After the rescue is out, remove the battery as quickly as possible.

Step 2: Take out the SIM card of the phone, blot it with a paper towel, and let it dry in a ventilated and dry place.

Step 3: Find a hair dryer and use cold air for an hour or two, then use an electric fan to blow it for a day and a night, and then put it in a ventilated and dry place for a day and a night. If neither of these works works, just put it in a ventilated and dry place to dry it, and turn it on after three days.

If you have a disassembly tool at hand, disassemble the mobile phone, and dry each part of the mobile phone separately, the effect is better).

Step 4: Generally speaking, if you don't soak in water for too long, the above three steps can be basically done. If it still doesn't work, it may be that the motherboard is broken, and it should be sent to the repair station as soon as possible to deal with it.

The black screen of water ingress is generally short-circuited, if it is not burned out, then it can be placed in a water-absorbing place such as a rice tank to dry at a high speed, and it may still be used.

If the mobile phone accidentally gets into the water, you can try the following ways to deal with the mobile phone urgently to avoid secondary injury:

1. Please take the mobile phone to a dry and ventilated place as soon as possible, and use a dry paper towel or towel to blot the water stains on the surface of the mobile phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please remove the SIM card and microSD card as soon as possible.

4. Please bring your mobile phone to the after-sales department of the mobile phone brand for testing and processing as soon as possible to avoid unnecessary losses.

2. Please do not bake with a hair dryer or stove after water ingress, so as to avoid liquid flowing into the inside of the mobile phone and damaging the mobile phone at high temperatures.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, the data may be lost, it is recommended to ask the staff how to back up the data.

1.Do not try to turn on the device immediately if there is water ingress. Because the iPhone has a built-in battery that cannot be removed, the motherboard will be short-circuited if it gets into the water, and if it is turned on, the motherboard will be burned, causing irreparable consequences.

2.You can first use toilet paper to dry the water outside the mobile phone, and then place the mobile phone screen horizontally to prevent water from flowing to the motherboard, and then use a blow dryer to dry the water, and turn on the temperature at medium or small temperatures.

3.Wipe down the circuit board with anhydrous alcohol and try to turn it on. Because alcohol volatilizes quickly, the moisture on the circuit board can be volatilized clean.

4.Send it to a repair center for repair as soon as possible. If the motherboard is severely corroded over time, it will cause irreparable consequences.

In general, your iPhone can't turn on after getting into water, probably because the motherboard or other components have burned out due to water, so it can't turn on.

Mobile phones are afraid of water, many mobile phones are really not worth repairing after entering the water, and it is very expensive to repair, or it is not good to repair.

It's better to just get a new one, and now the new phone is relatively cheap. Even if many are barely repaired, there will still be some hidden dangers.

Because the motherboard will corrode after the mobile phone is flooded, even if it is repaired temporarily, the failure rate in the future is very high, and other components on the motherboard are easy to break down and be damaged.

After the phone accidentally gets water, it is recommended to do the following:

1. First of all, the mobile phone should be salvaged as soon as possible, and if the battery can be removed, the battery should be removed immediately to prevent short circuit; At the same time, it is better to remove the SIM card so as not to lose the contact information. The longer it stays in liquids, the more damage your phone will suffer for life.

2. If the phone falls into salt water, not fresh water. Salt water forms a "salt crust" in the phone's internals. If your phone has fallen into seawater or other salty water, you need to rinse it gently with fresh water – after removing the battery and SIM card, and before the drying process begins.

4. Wipe every part of the phone with a cloth or paper towel, and don't move or shake the phone too much to avoid water swimming everywhere inside the phone.

5. Try wrapping your phone in a cloth or paper towel for a few minutes to absorb excess moisture. Turn on the cool air setting of the hair dryer and blow at the hole of the mobile phone about 30cm away from the mobile phone for at least one hour.

6. Finally, wrap the phone in a paper towel and put it in a jar or bag full of rice for at least 24 hours, during which time it cannot be turned on. Rice absorbs water very well and can save a damp phone.

7. The above is only a salvage measure, if there is still a failure, please go to the after-sales maintenance.

My phone was flooded before, and then the screen was broken after a week, so it was sent for repair, and after the repair, it was exactly the same as the new one, and the specific repair process is as follows.

Make an appointment for maintenance, go to Apple's official ** to make an appointment for the location and time of the repair you want to go to (be sure to arrive on time, otherwise the appointment will be canceled, and the appointment will be in vain.) ）

Repair, if it is a hardware quality problem or a non-human problem caused by the failure of the mobile phone, it can be repaired free of charge to restore the mobile phone to a new state (in fact, if the hardware problem is almost all the upper shell parts such as the screen motherboard are replaced with a new one, if your mobile phone back shell is very new, it is equivalent to a new mobile phone.) ）。If it is a man-made mobile phone failure, such as a screen problem caused by water ingress like me, you need to pay for repair, and the cost of replacement plus taxes totals 1200 yuan.

At the end of the repair, you can make an appointment with the commissioner before the phone is repaired, if you go to the store to get it, you can get it in a day at most, then I got the phone from three o'clock in the afternoon to six o'clock in the afternoon.

I advise you not to fix it, just sell it. Because the motherboard will corrode after the mobile phone is flooded, even if it is repaired temporarily, the failure rate in the future is very high, and other components on the motherboard are easy to break down and be damaged.

How to get water into your phone:

1. First of all, when you accidentally find that your mobile phone is in water, you should pick it up immediately, the longer the mobile phone is soaked in water, the greater the damage, so you should not hesitate to pick it up if you find that your mobile phone is in water.

2. After picking up your mobile phone, you must not perform any key operations on the mobile phone, especially if it is a touchscreen smartphone. You should carefully remove the back cover of the mobile phone battery, peel off the mobile phone battery, and power off the mobile phone.

3. After the power is off, you can carefully wipe it with a dry cloth, and then you can move on to the next step after wiping off the external water droplets. Do not use a hair dryer to dry your phone, otherwise the heat may cause devastating damage to the sensitive components inside the phone.

4. Next, put the external dried mobile phone into a sealed container, wrap some plastic bags on the outside, and use rice to fill all the containers, so that the mobile phone is submerged in the container, and it is better to leave it for 1 2 months. In general, if possible, put in desiccant for better results.

5. After one month, take out your mobile phone, install the battery, and try to turn it on. If it can be turned on successfully, then the phone can be used normally, if it can't be turned on, you can only consider buying a new phone.

It depends on how long you have been in the water, if the water is serious and it hasn't been treated for a long time (you just give up). Of course, for me to be a repairer, as long as you pay for it, there is no bad phone to repair, you say, right? It's a big deal to change the substrate and replace the machine to install your original shell, but this can't be drawn.

It depends on the damage, immediately after the water is in, the battery is under the pressure to prevent the circuit board from being powered on, which will burn out the battery, use a hair dryer to carefully dry it and see if it can be turned on If it can't be turned on, get it for maintenance Good luck.

The solution to the iPhone won't turn on:

Apple mobile phone can not turn on first to determine, is it because of the reason that the mobile phone battery is dead, first charge the mobile phone for a while and press the power button to see, it may be because the mobile phone is not low enough power to cause the mobile phone to not turn on normally.

In this case, the Apple mobile phone can't turn on, and it may be that the phone is in a dead state, you can also try to press and hold the power button at the same time, the power on button + home button, and wait a few seconds for the phone to automatically restart.

There are usually Apple mobile phones in the process of flashing or updating and upgrading, you will also encounter the problem of not being able to turn on, and when you encounter the problem of not opening the machine caused by this reason, usually due to the improper operation of the mobile phone flashing or system upgrade, the white apple, the boot has a display, but it has been parked in the logo interface of the iphone, and the mobile phone cannot enter the system.

If the above methods cannot solve the problem, then it may be caused by the hardware failure of the mobile phone, such as: the Apple mobile phone boot button is broken, the battery is aging, etc., it is recommended to contact Apple for repair to solve this problem.

What to do if the iPhone gets into the water:

Do not try to turn on the machine immediately after water ingress. Once you try to boot it, it will increase the area burned out by the motherboard by short circuit.

2.Don't shake your iPhone. If you shake your iPhone, water will flow and water may expand inside your iPhone.

3.Clean up the water ingress location in order (Apple Customer Service Center 010 5363 0616) Quickly remove the SIM card and wipe the water in the iPhone shell, Dock port, and SIM card slot.

4.Do not turn on the machine immediately after absorbing or wiping off the water. It is essential for a professional to clean the moisture of each chip of the internal motherboard.

5.Water ingress can't be turned on, most of them are short-circuited motherboard power supplies, CPUs, hard disks and other chips. The motherboard needs to be repaired.

6.Contact a repair center for free testing and repair.