Why can t I connect to the Internet with my wireless router?

This is a common problem, and there are several possibilities: 1. The wireless router does not have a good driver installed. Such as:

There are other problems during the installation, causing the installation process to ignore some important files, once this happens, just reinstall the driver. 2. The driver file is not applicable to the Windows installed on this computer. For example:

Windows 98, Windows ME, Windows XP, Windows 7, Windows Vista, etc. require different driver files, so you must distinguish them clearly and prescribe the right medicine to run normally. 3. The driver file is missing. This is usually due to the corruption of the original file in which the driver was installed, such as:

1) The installation disc is scratched, so that some of the files are no longer working or cannot be used. (2) It is damaged when it is transmitted from another computer, such as a power outage during transmission, or it is damaged by other Trojan viruses, etc.

3) There is a conflict between the driver file and one or more software or programs that have been installed on the computer, resulting in some files that cannot be installed during installation. 4. The drive file is expired or invalid. Some computers have installed a system configuration that is too high to allow some low-level files to be unusable, or the driver files are too old to make the computer unable to recognize the files, which can cause this to happen.

5. Some parts of your wireless router are damaged.

Check the following aspects:

1. Confirm whether the broadband account is normal and there is no arrears;

2. Make sure that the network cable of the router is connected to the modem, router, and computer correctly, and the corresponding indicator lights are normal;

3. Enter the default login address address of the router in the address bar of the browser (for example, enter the username and password to log in to the router settings interface, check whether the "WAN port status" obtains the IP address normally, if it prompts "Dialing failed", please click Help to view, and follow the steps in the help to troubleshoot;

4. You can also directly use the router first, use the cat dial-up to try the Internet, see if you can dial up the Internet, if you can, then connect to the router and try again.

Broadband wireless cat.

To build a home wireless broadband network, it is generally necessary to purchase a variety of equipment, such as ADSL modem, broadband router, wireless router or AP, switch, etc., not only the investment is large, but also the connection of its cables and the need for the power adapter to find the right socket is enough to be busy for a while.

And with the advent of a Modem, a broadband router, a wireless router or an AP, a switch, and a broadband wireless modem, it all makes it easier.

In this case, if you use a network cable that also comes from the LAN port, the computer can access the Internet, whether you use a broadband connection to dial-up the Internet? If yes, prove that your routing hardware is connected and set up incorrectly! It is recommended that you check and set it up as follows!

1. Connect the home network cable to the WAN port of the router, 2. Connect your computer with another network cable at one end, and connect the LAN port of your router at the other end

interface! 3. Open the computer, open the browser, enter the route login IP in the address bar, 4, enter the route login account and password in the pop-up dialog box, friendly reminder, if you don't know the route login IP, login account and password.

code, you can turn the route over and look at it, and there is a writing on the back of the route!

5. After entering the routing setting interface, the quick setting interface will generally pop up, and you can select the broadband dialing method in this interface.

PPPoE, enter your Internet account and password!

6. After the settings are completed, save the exit and restart the route!

Once the routing restart is complete, your routing hardware connection and setup are complete!

In addition, there is another point to remind that if your home is a ** line and there is a cat, it is recommended that you turn off the power of the cat when you set the route, and when the route is set up, turn on the power of the cat!

Click the network connection icon in the lower-right corner of the desktop, and then tap"Open the Network and Sharing Center - Change adapter settings Manage Network Connections - Right-click Local Connections - Properties"(Or click.)"Start button -- Control Panel -- Network & Internet -- Network & Sharing Center -- Change adapter settings Manage Network Connections --Right-click Local Connections --Properties"Refer to the settings below

Telecom Fiber Modem + Wireless Router Settings.

1. First of all, change the wireless router IP: connect your computer with TP-wireless router separately, do not connect the optical modem, so that you can enter the TP settings page, change the router LAN port address in the network settings - LAN port settings to, save, DLINK router is written behind the router Yes, this is no conflict with the default telecom fiber optic modem, you don't need to modify the IP.

2. To the network connection, cancel the "broadband connection" as the default connection; Click Local Join, Right-click, Properties, Select: Automatically get IP address, DNS server, OK; In IE, enter :, account number:

admin password: admin Log in to the router to set up: click the setup wizard, enter the widenet account and password, and select the mode:

pppoe。Save to exit.

3. Connect the network cable connected by the optical modem to the WAN port of the router, and continue to set the wireless routing on the TP-Settings page.

4. Fiber Optics Cat Telecom has been set up, and it should not be changed if it can access the Internet; Now the main thing is to set up a wireless router:

1. Basic settings of wireless network: 1. Turn on the wireless function; 2. Turn on SSID broadcasting. Wireless Network Security Settings:

Turn on the security settings and use the WPA-PSK WPA2-PSK AES encryption method. 1. Select: WPA-PSK WPA2-PSK; Type of Certification:

Automatic; Encryption algorithm: AES; Settings: psk password:

Add it yourself; 2. Network parameters: 1. WAN port setting: WAN port connection type: PPPoE; 2. Second connection: disabled; 3. Corresponding connection mode: automatic connection;

3. DHCP server: enabled; Save, restart. It should be possible to access the Internet on computers and wifi.

If the problem is solved, please be prompt, thank you!

The router must not only have the correct network cable connection, but the most important thing is that it needs to be set up before you can access the Internet.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router.

Settings interface. (If you can't get in, please look at the nameplate at the bottom of the router.)

Or the router instruction manual, the default settings of different models of routers are different. ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

First see whether the router is successfully connected to the external network, which has nothing to do with the computer.

What should I do if my router is connected but I can't connect to the Internet?

1. The computer at the beginning can be connected to the Internet, which means that your routing configuration is fine.

2. I didn't use the router for a while, so I unplugged it, and if I didn't touch the data inside, the data configuration should be fine.

3. The wireless signal can be received on the mobile phone, which means that the router is good, no problem.

4. If you unplug it and then connect it, you can't automatically dial the number, and you can't get on the network, which means that the problem is likely to be that you plugged the wrong wire.

Solution. 1. First of all, make sure that the network cable out of your cat is directly connected to the computer and can dial up the Internet.

2. After determining that the main line can access the Internet, connect the cat's network cable to the WAN port of the router, determine that it is the WAN port, and the computer is connected to the LAN port, that is, the port marked with the number, 3. If the above two points do not work, please ask someone from the computer company to help configure the router, or directly search for the configuration method of the same model of router.

It is recommended that you set up your wireless router again! It may be that the configuration information inside is missing!! You can go into the wireless router to see if the play and port are connected! Is there data to show it!

Your account password is incorrect