Yesterday I reinstalled the system, and today I found that the computer was stuck, and there will be

Why don't you use Jinshan to reload??? This is the most foolish software and it won't go wrong.

You start the task manager to see which program or process is stuck because it consumes more CPU and memory, and then forcibly terminates the process.

Then analyze whether the process that caused the card is a virus. You can send it to me to help you judge. Then I decided to reinstall some software or something. Don't just mess around uninstalling software, that will only make a mess of your system.

Hello friends, in this case, you can use the next 360 first aid kit,**, after decompression, enter the safe mode to run the 360 system first aid kit custom full scan, check and kill again, and restart the computer after the killing is completed. Then open the 360 system first aid kit, select the repair function (the repair options can be selected all), repair it immediately, if it still can't solve the problem, then reinstall the system.

Dear Kingsoft network users, hello:

Due to the limited information available, it is not possible to determine the specific cause of the problem for you. Please feedback your questions to the official Weibo of Kingsoft Heavy Loading Master.

or the Drug-Loving Community (

You can try to use Jinshan Guardian to reinstall the system. One-click reinstallation is simple and fast, and it can restore the original system before reinstallation within 7 days... The landlord can give it a try.

Don't patch, if something goes wrong you can use a dedicated restore. Some patches are incompatible. Don't make it up if he prompts you.

In the Control Panel - Delete Additive and remove all the patches. Try.

The patch is not compatible and it would be nice to uninstall it.

Some patches are incompatible, revert below.

If you are using a one-click reinstall system tool, this problem will not occur, the operation of this software is similar to Kingsoft's, but the effect is completely different, more convenient and trouble-free.

There's no way but to reinstall the system.

Analysis: This screen appears because the hard disk file was damaged due to the last abnormal shutdown, and the system is now detecting and repairing it.

Processing: 1. The only thing the user needs to do is: wait patiently for it to finish, and it will automatically restart when it is completed. If you can't get into the system after restarting, you need to reinstall the system.

2. If you need to enter the system in a hurry, you can also press the ESC key to skip the automatic repair and enter the system directly when the automatic repair screen appears, but the next boot will still need to be automatically repaired, and often skipping the automatic repair is easy to cause damage to the hard disk.

3. If this screen often appears, there may be more fragments or bad sectors in the hard disk, and you need to use the system U disk or CD to start the computer, and use special tools such as diskgen to detect and repair the hard disk. If the repair doesn't work, you need to replace the hard drive.

If the installation is not successful, please reinstall it with the system disk.

Dear Kingsoft network users, hello:

One-click cloud reinstallation, no disc required. With a single effort, you can create a new, lightweight, fast and stable system.

Step 1: Open"Kingsoft Heavy Loader", select"Reload detection"to go to Environment Detection to see if your system supports it.

If the detection is supported, the reinstallation mode is optional:

If you choose the backup mode, you can quickly back up chat history such as QQ, MSN, Want Want, My Docs, Desktop, IE Favorites, Email, etc., to ensure that you will never lose it, and you can restore it after the reinstallation is completed. For projects that do not support backup, you need to back up the data yourself.

If you choose pure mode, no data is retained, a clean system is installed, and the driver is automatically installed.

After selecting the reinstall system mode, tap"Start reloading"。(Preparations before reinstalling the system: the computer must be connected to the Internet, and the security software needs to be withdrawn as much as possible before reinstallation).

Step 2: Point'Start reloading'After that, it will automatically enter the reinstallation stage, which does not require manual operation and takes about 20 minutes (depending on the network speed).

At this stage, please do not disconnect the power supply and keep the network connection normal.

The reinstallation process needs to be completed by restarting the computer, and you will be prompted to automatically restart after a 30-second countdown. (During the process of reinstalling the system, the computer will automatically restart 3 times, don't be nervous!) Automatically goes to your desktop when the reboot is complete).

For this stage of automatic reloading, you will see the following interface:

Step 3: After the computer restarts, enter the desktop, automatically start Kingsoft Reinstall Master, and restore the data (system settings, drivers, retained software and corresponding data.

The reinstallation of the system is complete.

The reinstallation system in Kingsoft Guardian is called Kingsoft Reinstallation Master, which is an automatic backup and automatic reinstallation on the basis of your original system, which is particularly convenient, can automatically install drivers, automatically back up common software and QQ chat history, etc.

That's good! It's very easy to reinstall, there are instructions, and if you're afraid, you don't think it's good to make, you can also restore the old system within 7 days, I'm using that reinstalled now, it's good

Then don't order, generally don't dare to order are not understood, you have passed this step, you still don't understand what the next step means, so it is recommended that if you don't understand, don't mess around.

.Turn on the computer, put the XP installation disc in the optical drive, then press and hold the del to enter the BIOS, and set the CD-ROM to the first boot! If prompted"boot from cd", press enter.

2.Enter the splash screen, select Install WinXP, press Enter to install! Pressing enter may appear"press any key to boot from cd"At this time, continue to press enter, otherwise the hard disk will start.

3.Select the 1st one, press enter, and start the installation, reading the driver to memory.

4.After loading the driver, you can see the partition of your hard disk, and it is recommended to install the C drive. It should be noted here that if you want to do a clean install, then you need to format it, so the key to formatting is to delete the C drive first.

Only the XP installed in this way is a brand new XP. So please move the cursor to the C drive and press"d", delete partition C.

5.You pressed"d"After (delete), XP will confirm that you will lose data because you are afraid that you will delete it by mistake and prompt deletion. Of course, I'm just going to format it and then install it, so please press it"Enter"Go on.

6.Keep pressing"l" 。

7.After deletion, the C drive becomes an unpartitioned partition! Press"Enter"Go on.

8.Here you will be asked to choose the disk format. Let me talk about the difference between NTFS and FTA.

First of all, NTFS has all the advantages of FAT, NTFS has less fragmentation than FAT, high security, can encrypt files, supports disk quota, supports partitions above 30G, supports compression, and compresses up to 50%. I like to use NTFS and declutter the disk very quickly. However, due to the high security of NTFS, the NTFS partition cannot be accessed under DOS, and it cannot be formatted for the boot floppy disk, only the XP disc can be formatted.

So, if you're not sure, it's better to use FAT. The following 4 choices, (fast) means quick format.

9.Press"Enter"Go on.

10.Formatting.

11.The installation begins. The disc installation is automatic, from start to finish, and it is estimated to take 20-30 minutes.

12.Familiar installation screens.

13.Installed, 1st reboot.

14.Installed.