Why can I read the disk on my own computer, but not on someone else s computer?

Updated on technology 2024-04-15
13 answers
  1. Anonymous users2024-02-07

    The quality of your disc or the burner is not good, or their disc drive reading capability is not good.

  2. Anonymous users2024-02-06

    Generally, in order to shorten the boot time, (not much faster, at most about 1 second) after installing the system, you will enter the BIOS to set the boot to the hard disk to boot, if you use the disc to install the system, you must enter the BIOS to set the boot to the optical drive to boot.

  3. Anonymous users2024-02-05

    This is normal, you can reduce the burning speed and try again, generally the CD is below 16 speed to burn the reading performance is better.

  4. Anonymous users2024-02-04

    The best burning speed for data burning on a CD disk is 40x-48x, and you can readjust the burning speed.

  5. Anonymous users2024-02-03

    The reading capability of each optical drive is different

    I burned my CD-ROM drive and couldn't read it myself.

    Reading is fine on someone else's machine.

    I'm depressed.

  6. Anonymous users2024-02-02

    There are many incompatibilities in the disc burned by the recorder, and it is even more common for the boot disk to be burned. The reasons are complicated and hard to say.

  7. Anonymous users2024-02-01

    There is no disc boot set in CMOS.

  8. Anonymous users2024-01-31

    Tick at a low speed (below 32).

  9. Anonymous users2024-01-30

    It's your own recorder that doesn't work.,I've also encountered such a problem.,Mine is Kangbao.,It's no problem to read the engraved disc yourself.,Other optical drives are not easy to read.。

  10. Anonymous users2024-01-29

    。。。There's also this kind of problem.,I guess his optical drive is not good.。

  11. Anonymous users2024-01-28

    Because their computers aren't as good as yours!

  12. Anonymous users2024-01-27

    Is his machine a *** optical drive?

  13. Anonymous users2024-01-26

    The USB flash drive can be read on the computer, but it cannot be read on the disk drive.

    It should be the reason for the disk machine, because the compatibility of the disk machine is not as good as the computer, if the disk player can not recognize the USB disk, but the computer can recognize it, it should be the problem of the disk machine. As for the solution, it can only go to the manufacturer of the disk machine to see, because the disk machine is not like the computer can be installed if you want to install anything, and a lot of things in the disk machine have been solidified in it, and there is no way to do the bureau to report the letter law, unless it is upgraded. As for the USB flash drive, the compatibility of the unlicensed USB flash drive is much poorer, and sometimes it will be unrecognizable on the computer.

Related questions
8 answers2024-04-15

The memory of the system is calculated according to the calculation method of 1g=1024m, 1m=1024k, 1k=1024b, and the external memory is 1g=1000m, 1m=1000k, 1k=1000b, and the calculation method of the system's memory after formatting, of course, the capacity becomes smaller, and if the disk has bad sectors, it also becomes smaller after formatting.

5 answers2024-04-15

Please don't steal my answer!!

Plan 1 [New P]. >>>More

20 answers2024-04-15

If you don't recognize it, log out or restart.

5 answers2024-04-15

When the weather is hot in summer, when the temperature of the CPU or graphics card is overheated, it will affect the running speed of the system, so check whether the cooling fan of the CPU and graphics card is running normally or the heat sink has too much dust affecting the heat dissipation ability, and there is a possibility that the system may be infected with viruses and Trojan horses.

14 answers2024-04-15

Plan 1 [New P].

Note [Original]: >>>More