The correct way to use electronic scales, how to use electronic scales

Here's how to use the scale:1. Place the electronic scale on a horizontal table and place it stably.

2. Turn on the power supply, the power switch position is usually located in the lower right corner of the electronic scale, do not put the items on the weighing pan, and wait for the display screen to automatically clear to zero.

3. If the weight of the power just turned on is not zero, please wait for a while, or turn the power back on to make it zero.

4. Enter the unit price of the item, and place the product on the electronic scale to calculate**.

The tutorial for using the electronic scale is as follows:1. The electronic scale needs to be placed on a horizontal table.

2. Turn on the electronic scale, and then clear the reading of the electronic scale.

3. Enter the unit price of the commodity on the electronic scale, and place the commodity on the electronic scale to calculate the **.

4. Electronic appliances for weighing the weight of objects. It is composed of sensors, load-bearing devices and microcomputer chips.

When a load-bearing device is subjected to the gravitational force of an object, the sensor outputs an electrical signal proportional to the weight and transmits this signal to the computer system. A variety of data can be displayed and printed on request. High accuracy.

Operating equipment: electronic scale.

The operation method of the electronic scale is as follows:

1. First of all, the newly bought electronic scale or the electronic scale with low power needs to be charged, each time it takes 8 to 12 hours, and a charge can be used for one to three weeks.

2. Then put the electronic scale on the flat table, observe whether it is level, if the electronic scale is unstable, adjust the position to make it stable.

3. Then press the on/off button, and the display screen of the electronic scale will automatically enter the self-test of 99999-00000. After the inspection is completed, it enters the weighing state.

4. Accounting method: For example, if you want to weigh the screw cap with ** yuan kg, then press it on the screen of the electronic scale first, and then put the screw on the electronic scale. Later, the display below the scale will show the weight, and the display on the left side of the scale will show the element.

Precautions for the use of electronic scales:

1. It is strictly forbidden to wash in the rain or with water, if it is accidentally wet, wipe it with a dry cloth, and send it for repair as soon as possible when the machine function is not normal.

2. It is strictly forbidden to knock on and press hard.

3. Do not place it in high temperature and humid environments, except for special waterproof and anti-corrosion scales. Raid.

4. Do not allow cockroaches or small creatures to invade the machine to avoid damage.

5. If the electronic scale is not used for a long time, the machine must be wiped clean, put in the desiccant and wrapped in a plastic bag, and the dry battery should be taken out. When using rechargeable batteries, they should be charged every three months to ensure their longevity.

6. Charging should not exceed 8-10 hours.

7. Weigh things that can't exceed his maximum Zen weight. <>

Proper use of electronic scales:

1. Please place the electronic scale on a stable and flat desktop or ground, and do not place it on a vibrating or unstable desktop or countertop. (as shown in the image below).

2. The bottom of the lower right of the electronic table at the power switch position. When the power is turned on, do not put the items on the halberd plate, and warm up the machine for more than 2 minutes before use, the longer the heat up time, the higher the accuracy. If the weight is not zero when you turn it on, wait a while, or turn it back on to zero.

(as shown in the image below).

3. The zero on the electronic scale is to weigh an item, and the next time it is called a different item, it will be zero, and the electronic scale will be re-measured and priced. (as shown in the image below).

4. Tare is the basic function of the electronic scale, its accurate use is to help weigh the container on the weighing platform, such as a small crack Qi Chun basin, and other auxiliary items, the auxiliary container to help weigh is placed on the scale, and then press the tare key, re-replaced with zero of the electronic scale, and then put on the weight of the item is displayed as the net weight value. (as shown in the image below).

5. The electronic scale is a kilogram scale, 1 kg = 1000 grams = 1 kg = 2 catties, 50g = 1 tael. (as shown in the image below).

1. First of all, put the scale on the horizontal desktop, and then turn it on, about 50 cm away from the radiation of the mobile phone and computer, the air flow should not be too large, do not face the air conditioning fan and other objects with large air flow, and the 0g is displayed after turning on (or then put the items on and weigh them.