XP system installation, ask the master for help, 444052133

Preparation:Ghost install XP system boot disc a、Save the files you think are important in the computer to the USB disk、Leave it in the computer in the future you can't find it,**A "driver wizard with network card driver" software! Let's get started, 1. First go to the next hardware test software on the Internet to understand your computer hardware model.

3. Enter the BIOS, find the boot option, and take your optical drive as the first choice, because the following is to use the boot software in the optical drive to boot and operate.

4. Set the CD-ROM drive to start and save it (these are all in English in your BIOS, you can go to the Internet to search for articles translated into Chinese.) 5. Put in the ghost system installation disc, restart the computer, and press the enter key when there is a prompt to start the optical drive (you can also keep pressing the enter key until the disc works, and then you will see the content options in the boot disc, click the up and down keys, otherwise you don't wait for you to finish reading half of the system's default choice is the last item "start the computer from the hard disk", and select up and down to stop the default option of the system!

6. The first thing you have to choose is "instantly divide the hard disk into 4 partitions" Enter, there will be a warning prompting this operation, continue to enter, follow the step operation, the hard disk will be divided into four new partitions, after completion, return to the interface that just started the disc operation option, select 1 "Install the system on C disk" Enter, the rest of the things you don't stare at him, this step is about 20-30 minutes away from the complete end, there is a restart of the computer in the middle, you can leave it alone.

7. Congratulations, the system is the end of the installation, install your previous ** driver wizard into the new system, (it is worth mentioning that the installation directory must not default to the c disk, select d e disk is OK) run the driver wizard, it will automatically detect the hardware driver of your computer, the scanning is over, click on the driver you need, and it will be automatically installed after completion! After the driver installation is completed, please install the antivirus software and security guard in time, so that the system installation is completed.

Ghost's system installation will have some commonly used software to help you automatically install it in the system, you can choose to delete and keep it according to your needs, and it is best to delete it with optimization software.

The above is a simple installation of the ghost system installation disk! And backups! Hope it helps!

There are a variety of ways to deal with it as follows, for your reference:

The virtual optical drive can be installed with the system:

Load the iOS image and run the image, which will generally automatically open an interface for installing the system, with several options such as:

Install Windows XP to C drive;

One-click backup; Quick partition ......Wait a minute.

You can choose to install XP to the C drive. And then it's almost all automatic.

There is a tutorial for this, which you can refer to.

2.You can burn it to a disc, as long as you have a burning drive, and then the next burning software is good.

3.It can be packed in a U disk, and there are two types here:

1) Install the PE system on the U disk, start the PE with the U disk, open the GHO file under the PE, copy the files in the GHO to the C drive, and replace all the files in the C drive. You can refer to.

2) Directly install ISO to the USB flash drive, you can use the UltraISO software, and then start from the USB flash drive, the effect is the same as the CD. Ultraiso's method of putting ISO on a USB flash drive can refer to the first half of the following **.

Pure hand-played, can be asked. Best wishes!

1. Direct virtual drive installation is possible, 2. Use one-click GOST is also possible.

After loading the image, there will be an installation file inside, click on it, but the things that install the system C disk will be cleared.

Just install it directly on the C disk.,If there's an option to come out.,Choose to overlay the installation on the line.,If not, reply to me!

I'm going to teach you a stupid way to do it, you unzip it, you run it, and the system does it all over on its own, and it does it on its own.

Install it directly, install it in the system, and you're good to go.

1,First**a Rainforest Wood Wind XP System Ghost Version,Here I recommend everyone**The latest system。 Because the latest system has updated the patch to the latest time. For example: I'm the one who is: win7 system.

2. Back up the important file information on the C drive and the desktop, if your driver is special, you can also use the driver life software to back up the driver.

Okay, let's start the system reinstallation: It's super easy, and if it goes well, it only takes 3 steps.

Step 2: Open the unzipped system directory and open "Install System". exe", and then click "Open" in the path of the ghost image file, select "this file" in the system directory, and then click "OK", and click "Yes" in the pop-up window.

Note: Due to a small bug in the installation software, there may be problems during the installation process.

If you select "File", you can't be sure. This is because there are Chinese characters in your path, at which point you can change the Chinese characters to English, or you can do it""Copy this file to the root directory of the D drive or E drive, select and install it.

Hello. There are several common ways to install a computer system.

Please refer to the Experience

(1) Make a USB flash drive boot disk installation system

(2) Install the system with a hard disk installer

(3) Install the system with a disc

(4) ISO system file click: setup to install the system

(5) Use a ghost installer. The exe installation system is simply staring

If the system can be turned on and entered, the system can be installed by blocking any of the above methods;

If you cannot boot the computer into the system, you can use (1) or (3) of the above methods to install the system.

There are tutorials in it.,**Tutorial.,It's very simple.,You can read it if you don't know how to read.。

Is it remote, and it can't be connected when the system is installed???

Try the Jinshan Guardian and dominate; There are many features that can be used; Such as cleaning up junk, optimizing system speed, etc.